Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

4gb flash drive not large enough for 7.4, clarify recovery procedure?

Featured Replies

I believe my 12 year old 4gb flash boot drive wasn't big enough for the last stable release 7.4? I was updating from the previous 7.3 stable and on reboot it would start up, attempt to write then beep and start over multiple times till I just shut the system down. I can put the boot device in windows and read it just fine but how to recover?

I purchased a larger flash drive someone recommended in a previous issue from ebay and since our issues seem to be similar the recommendation then was to create a new unraid boot disk with the 7.3 on it then just copy the entire config file from the old boot flash to the new boot flash is that truly all I need to do? I understand once I do that I need to re-register the guid with unraid but just double checking that this relatively simple fix is the procedure, thank you.

I was backing up the flash but on hindsight backing up the flash to the array was kinda dumb since I can't get into the array to use that backup, I will remedy that once I get back in.

syslog

A 4GB flash drive should be large enough for 7.4. The update keeps a copy of the previous release on the drive too, and 4GB has room for both. The syslog you posted is from the 7.3 shutdown before the update reboot, so it doesn't show what happens during the failed boot. It does show the array stopped cleanly, so your data should not be affected by that reboot.

The beep you hear is the BIOS starting again, so the server is resetting at some point during startup. It would help to know where that happens: does the Unraid boot menu appear, and what is the last text on screen before it resets? A photo of the screen right before the reset would be ideal.

For recovery, your plan is fine:

1. First, copy the entire contents of the old flash drive to your PC and keep that copy safe.

2. Create the new flash drive with the Unraid USB Creator and choose the 7.3 release that was working.

3. Copy the complete config folder from your PC backup to the new flash drive, replacing the one there.

4. Boot from the new drive. Because the license is tied to the old drive, you will be asked to transfer it to the new one with Replace Key. All your settings, array assignments, shares and Docker containers should come back, because the whole config folder is kept.

If 7.3 boots normally from the new drive, the old flash was likely not the problem. Please let us know before trying 7.4 again, and if you do try it and it resets, post a photo of the last screen.

Once you are back up, I would recommend downloading a backup with Main > Boot Device > Boot Device Backup and keeping it on your PC instead of on the array.

  • Author

I very much appreciate your very clear instructions on this issue, I only think it didn't have enough room because I noticed in 7.3 the flash drive would turn red and indicate 200mb left so maybe the flash drive has too much data on it from something or other, but maybe that isn't the issue at all as you indicated. I will just go ahead and fix the flash drive since already ordered the new one then proceed from there. I don't have a monitor hooked up to the server but I suppose I could rig one up to catch the boot up if it comes to that.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.