July 6, 201213 yr ok I had just been re-arranging the server area, moved my servers, plugged back in, started up, all looked good. Started to refile some new things to it and suddenly very very slow, pulled up the gui and REDBALL on the drive I was writing to! Checked the log and it was showing errors, but curiously, was also showing TEMPERATURE errors. Tried to use scripted shutdown from UNMenu.. "array would not stop" went to the main page and Drive 1 was showing red with a temperature of 0, but the other 8 drives had temps (30-32) but were showing UNFORMATTED! Carefully stoppped the array, did a clean shutdown. Pulled the covers, checked all the cables and made sure all were well seated. Restarted the box, array comes up, Drive 1 still redballed, all others green and online, temperatures on all (29-31) So, how to proceeded? smart for drive 1 and current log attached. 4.7PRO if the log isn't obvious redball120706.txt smartdrive1.txt
July 6, 201213 yr The disk looks fine. See here: http://lime-technology.com/wiki/index.php/Troubleshooting#What_do_I_do_if_I_get_a_red_ball_next_to_a_hard_disk.3F
July 6, 201213 yr Author ok I'm thinking a cable got loose while moving it around.. so??? Stop the array. Go to the Devices page and un-assign the disk. Go to the main page and start the array. Stop the array again. Go to the Devices page and re-assign the disk. Go to the Main page - system should indicate there is a "new" drive to replace the disabled one. Check the confirmation box and click Start to start a parity-reconstruct of the disk. yes? (yeah, paranoia... I've got 20tb of video there and don't want to screw up)
July 7, 201213 yr Author ok SMALL PROBLEM... the array won't stop.. better said, I did the stop array, and it just ... went away.... webserver inactive, no response just hangs waiting... can still putty in however /diskx shares are no longer visible here's then end of the syslog (I haven't gone farther, it's just sittting there.....) Jul 6 18:09:07 BURBANK emhttp: shcmd (38): /etc/rc.d/rc.samba stop | logger Jul 6 18:09:07 BURBANK emhttp: shcmd (39): /etc/rc.d/rc.nfsd stop | logger Jul 6 18:09:08 BURBANK emhttp: Spinning up all drives... Jul 6 18:09:08 BURBANK emhttp: shcmd (40): sync Jul 6 18:09:08 BURBANK kernel: mdcmd (25): spinup 0 Jul 6 18:09:08 BURBANK kernel: mdcmd (26): spinup 1 Jul 6 18:09:08 BURBANK kernel: mdcmd (27): spinup 2 Jul 6 18:09:08 BURBANK kernel: mdcmd (28): spinup 3 Jul 6 18:09:08 BURBANK kernel: mdcmd (29): spinup 4 Jul 6 18:09:08 BURBANK kernel: mdcmd (30): spinup 5 Jul 6 18:09:08 BURBANK kernel: mdcmd (31): spinup 6 Jul 6 18:09:08 BURBANK kernel: mdcmd (32): spinup 7 Jul 6 18:09:08 BURBANK kernel: mdcmd (33): spinup 8 Jul 6 18:09:09 BURBANK emhttp: shcmd (41): umount /mnt/disk1 >/dev/null 2>&1 Jul 6 18:09:10 BURBANK emhttp: shcmd (42): rmdir /mnt/disk1 >/dev/null 2>&1 Jul 6 18:09:10 BURBANK emhttp: shcmd (43): umount /mnt/disk2 >/dev/null 2>&1 Jul 6 18:09:10 BURBANK emhttp: shcmd (44): rmdir /mnt/disk2 >/dev/null 2>&1 Jul 6 18:09:10 BURBANK emhttp: shcmd (45): umount /mnt/disk3 >/dev/null 2>&1 Jul 6 18:09:10 BURBANK emhttp: shcmd (46): rmdir /mnt/disk3 >/dev/null 2>&1 Jul 6 18:09:10 BURBANK emhttp: shcmd (47): umount /mnt/disk4 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (48): rmdir /mnt/disk4 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (49): umount /mnt/disk5 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (50): rmdir /mnt/disk5 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (51): umount /mnt/disk6 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (52): rmdir /mnt/disk6 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (53): umount /mnt/disk7 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (54): rmdir /mnt/disk7 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (55): umount /mnt/disk8 >/dev/null 2>&1 Jul 6 18:09:12 BURBANK emhttp: shcmd (56): rmdir /mnt/disk8 >/dev/null 2>&1 Jul 6 18:09:12 BURBANK kernel: mdcmd (34): stop Jul 6 18:09:12 BURBANK kernel: md1: stopping Jul 6 18:09:12 BURBANK kernel: md2: stopping Jul 6 18:09:12 BURBANK kernel: md3: stopping Jul 6 18:09:12 BURBANK kernel: md4: stopping Jul 6 18:09:12 BURBANK kernel: md5: stopping Jul 6 18:09:12 BURBANK kernel: md6: stopping Jul 6 18:09:12 BURBANK kernel: md7: stopping Jul 6 18:09:12 BURBANK kernel: md8: stopping Jul 6 18:09:17 BURBANK kernel: mdcmd (35): spindown 2 Jul 6 18:09:17 BURBANK kernel: mdcmd (36): spindown 2 Jul 6 18:09:20 BURBANK kernel: mdcmd (37): spindown 3 Jul 6 18:09:20 BURBANK kernel: mdcmd (38): spindown 3 Jul 6 18:09:20 BURBANK kernel: mdcmd (39): spindown 4 Jul 6 18:09:21 BURBANK kernel: mdcmd (40): spindown 4 Jul 6 18:09:21 BURBANK kernel: mdcmd (41): spindown 5 Jul 6 18:09:22 BURBANK emhttp: shcmd (57): rm /etc/samba/smb-shares.conf >/dev/null 2>&1 Jul 6 18:09:22 BURBANK emhttp: shcmd (58): cp /etc/exports- /etc/exports Jul 6 18:09:22 BURBANK emhttp: shcmd (59): /etc/rc.d/rc.samba start | logger
July 7, 201213 yr ok SMALL PROBLEM... the array won't stop.. better said, I did the stop array, and it just ... went away.... webserver inactive, no response just hangs waiting... can still putty in however /diskx shares are no longer visible here's then end of the syslog (I haven't gone farther, it's just sittting there.....) Jul 6 18:09:07 BURBANK emhttp: shcmd (38): /etc/rc.d/rc.samba stop | logger Jul 6 18:09:07 BURBANK emhttp: shcmd (39): /etc/rc.d/rc.nfsd stop | logger Jul 6 18:09:08 BURBANK emhttp: Spinning up all drives... Jul 6 18:09:08 BURBANK emhttp: shcmd (40): sync Jul 6 18:09:08 BURBANK kernel: mdcmd (25): spinup 0 Jul 6 18:09:08 BURBANK kernel: mdcmd (26): spinup 1 Jul 6 18:09:08 BURBANK kernel: mdcmd (27): spinup 2 Jul 6 18:09:08 BURBANK kernel: mdcmd (28): spinup 3 Jul 6 18:09:08 BURBANK kernel: mdcmd (29): spinup 4 Jul 6 18:09:08 BURBANK kernel: mdcmd (30): spinup 5 Jul 6 18:09:08 BURBANK kernel: mdcmd (31): spinup 6 Jul 6 18:09:08 BURBANK kernel: mdcmd (32): spinup 7 Jul 6 18:09:08 BURBANK kernel: mdcmd (33): spinup 8 Jul 6 18:09:09 BURBANK emhttp: shcmd (41): umount /mnt/disk1 >/dev/null 2>&1 Jul 6 18:09:10 BURBANK emhttp: shcmd (42): rmdir /mnt/disk1 >/dev/null 2>&1 Jul 6 18:09:10 BURBANK emhttp: shcmd (43): umount /mnt/disk2 >/dev/null 2>&1 Jul 6 18:09:10 BURBANK emhttp: shcmd (44): rmdir /mnt/disk2 >/dev/null 2>&1 Jul 6 18:09:10 BURBANK emhttp: shcmd (45): umount /mnt/disk3 >/dev/null 2>&1 Jul 6 18:09:10 BURBANK emhttp: shcmd (46): rmdir /mnt/disk3 >/dev/null 2>&1 Jul 6 18:09:10 BURBANK emhttp: shcmd (47): umount /mnt/disk4 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (48): rmdir /mnt/disk4 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (49): umount /mnt/disk5 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (50): rmdir /mnt/disk5 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (51): umount /mnt/disk6 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (52): rmdir /mnt/disk6 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (53): umount /mnt/disk7 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (54): rmdir /mnt/disk7 >/dev/null 2>&1 Jul 6 18:09:11 BURBANK emhttp: shcmd (55): umount /mnt/disk8 >/dev/null 2>&1 Jul 6 18:09:12 BURBANK emhttp: shcmd (56): rmdir /mnt/disk8 >/dev/null 2>&1 Jul 6 18:09:12 BURBANK kernel: mdcmd (34): stop Jul 6 18:09:12 BURBANK kernel: md1: stopping Jul 6 18:09:12 BURBANK kernel: md2: stopping Jul 6 18:09:12 BURBANK kernel: md3: stopping Jul 6 18:09:12 BURBANK kernel: md4: stopping Jul 6 18:09:12 BURBANK kernel: md5: stopping Jul 6 18:09:12 BURBANK kernel: md6: stopping Jul 6 18:09:12 BURBANK kernel: md7: stopping Jul 6 18:09:12 BURBANK kernel: md8: stopping Jul 6 18:09:17 BURBANK kernel: mdcmd (35): spindown 2 Jul 6 18:09:17 BURBANK kernel: mdcmd (36): spindown 2 Jul 6 18:09:20 BURBANK kernel: mdcmd (37): spindown 3 Jul 6 18:09:20 BURBANK kernel: mdcmd (38): spindown 3 Jul 6 18:09:20 BURBANK kernel: mdcmd (39): spindown 4 Jul 6 18:09:21 BURBANK kernel: mdcmd (40): spindown 4 Jul 6 18:09:21 BURBANK kernel: mdcmd (41): spindown 5 Jul 6 18:09:22 BURBANK emhttp: shcmd (57): rm /etc/samba/smb-shares.conf >/dev/null 2>&1 Jul 6 18:09:22 BURBANK emhttp: shcmd (58): cp /etc/exports- /etc/exports Jul 6 18:09:22 BURBANK emhttp: shcmd (59): /etc/rc.d/rc.samba start | logger according to the syslog, it has stopped.
July 7, 201213 yr Author yeah, it was the web interface that was un-responsive... finally putty'ed in, did a command line reboot, came up, this time did the stop/unassign/start/stop/reassign/restart and 8 hours later, things are back to all green..
Archived
This topic is now archived and is closed to further replies.