opentoe Posted August 2, 2012 Share Posted August 2, 2012 Have been using RC5 with limited issues. Issues I have been having were reported. Is there any reason to update to the latest RC6? Any benefit or just to keep updated. Thanks. Link to comment
PeterB Posted August 2, 2012 Share Posted August 2, 2012 Have been using RC5 with limited issues. Issues I have been having were reported. Is there any reason to update to the latest RC6? Any benefit or just to keep updated. Thanks. That depends, partly, on your hardware configuration. The most significant fix between rc5 and rc6-test2 is the elimination of one cause of duplicate files on user shares. Unless you use an LSI disk interface, I think that all other changes could be considered as enhancements. Link to comment
abs0lut.zer0 Posted August 2, 2012 Share Posted August 2, 2012 so it is best to be on the latest test then ? Link to comment
Frank1940 Posted August 2, 2012 Share Posted August 2, 2012 so it is best to be on the latest test then ? Could be to your advantage if you to try the latest one if you don't want to find that YOUR particular system has a previously undetected and unreported problem when version 5.0 is released . Link to comment
abs0lut.zer0 Posted August 2, 2012 Share Posted August 2, 2012 so it is best to be on the latest test then ? Could be to your advantage if you to try the latest one if you don't want to find that YOUR particular system has a previously undetected and unreported problem when version 5.0 is released . makes sense, thanks Link to comment
damelon Posted August 20, 2012 Share Posted August 20, 2012 sort of un-related, but I am running a v5b13 and was considering upgrading to one of the latest RCs. Can someone please point me to a post/thread somewhere on upgrade steps? Having trouble finding it. Link to comment
Frank1940 Posted August 20, 2012 Share Posted August 20, 2012 sort of un-related, but I am running a v5b13 and was considering upgrading to one of the latest RCs. Can someone please point me to a post/thread somewhere on upgrade steps? Having trouble finding it. For the latest RC release, look at the first post in this thread: http://lime-technology.com/forum/index.php?topic=21597.msg191749#msg191749 For discussion on this release, start with this thread: http://lime-technology.com/forum/index.php?topic=21597.msg192497#msg192497 Since you are already running a Beta 5 release, you need only copy over the new bzimage and bzroot files from the downloaded zipped file. Then reboot unRAID. (Backing up these same two files before doing this will make it easy to revert to your present release.) If you should encounter any problems, post your difficulties. Link to comment
lainie Posted August 20, 2012 Share Posted August 20, 2012 sort of un-related, but I am running a v5b13 and was considering upgrading to one of the latest RCs. Can someone please point me to a post/thread somewhere on upgrade steps? Having trouble finding it. http://lime-technology.com/wiki/index.php?title=UnRAID_Server_Version_5.0-beta_Release_Notes Make a backup of your flash drive in case something happens & you want to revert. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.