August 7, 201213 yr I backup alot of photos regularly to a SSD cache disk to be moved to the array. However, most of the time this doesn't work. Often the files just stays at the cache drive without being moved. Sometimes the files are copied but not deleted from the cache drive. This is what fills the mover log: Aug 7 07:54:10 Atom logger: mover started Aug 7 07:54:10 Atom logger: moving Photo/ Aug 7 07:54:10 Atom logger: ./Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/full size til arkiv/01 Ramsland, Henrik Print?\200? Aug 7 07:54:10 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( Aug 7 07:54:10 Atom logger: .d..t...... Photo/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/full size til arkiv/ Aug 7 07:54:10 Atom logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Aug 7 07:54:10 Atom logger: ./Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/full size til arkiv/avis og tk?\200? Aug 7 07:54:10 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( Aug 7 07:54:10 Atom logger: .d..t...... Photo/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/full size til arkiv/ Aug 7 07:54:10 Atom logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Aug 7 07:54:10 Atom logger: ./Photo/FOTOGRAF NANO 2012/Alfred 02.08.12/collage Aug 7 07:54:10 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( Aug 7 07:54:10 Atom logger: .d..t...... Photo/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/ Aug 7 07:54:10 Atom logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Aug 7 07:54:10 Atom logger: ./Photo/FOTOGRAF NANO 2012/Alfred 02.08.12/Alfred 02.08.12/JPG Aug 7 07:54:10 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( Aug 7 07:54:10 Atom logger: .d..t...... Photo/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/ Aug 7 07:54:10 Atom logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Aug 7 07:54:10 Atom logger: ./Photo/FOTOGRAF NANO 2012/Alfred 02.08.12/Alfred 02.08.12/_MG_8188.dng Aug 7 07:54:10 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( ..... ...and it just goes on like this. I tried copying to the cache disk both through SMB and AFP. Using Unraid 5.0 rc5. Anyone knows how to fix these errors?
August 7, 201213 yr If the files are not moved at all then stop the array and reboot the system, I also have this sometimes, in most cases the "user0" directory is no longer there, is effetively stops the mover from working. If the mover runs but it is some files that do not get moved but others are then this is a rights issue.. The easiest thing you can do is run the permissions script from the utilities page. This will make sure they are set correctly. If you want to get your linux on you can do it yourself also, permissions need to be nobody/users for it to work. I suspect you will see that the files that do not move are owned by root. If you have done the above then invoke the mover and it will work. There is however a remaining action, there is some processes leaving the files owned by root and if you do not fix that you will end up doing this over and over. This can very well be a program that gets metadata for your movie files (coves and such), the files that are "stuck" on the cache drive should indicate to you what program is not running correctly (under the wrong user). If that is to complex then: - invoke mover manually - wait till it completes - check whats on the cache drive and give a few examples in this thread.
August 7, 201213 yr Author Thank you for your reply, Helmonder. I tried the things you suggested. Restarted a few times. Checked that user0 exists. Ran the permissions script. Before running the script most of the files were owned by the user that transfered them. After running they are owned by root. Looks like this: -rw-rw---- 1 nobody users 6148 2012-08-06 21:35 .DS_Store -rw-rw---- 1 nobody users 4096 2012-08-06 21:35 ._.DS_Store drwxrwx--- 7 nobody users 264 2012-07-26 16:47 Photo/ -rw-rw---- 1 nobody users 6148 2012-08-06 21:35 .DS_Store drwxrwx--- 2 nobody users 176 2010-02-11 20:31 Bilder\ som\ ikke\ hører\ til\ noe.ï©/ drwxrwx--- 4 nobody users 120 2012-08-06 23:22 FOTOGRAF\ NANO/ drwxrwx--- 10 nobody users 384 2012-08-02 14:11 FOTOGRAF\ NANO\ 2012/ drwxrwx--- 25 nobody users 800 2012-01-18 12:37 Simoneï¨/ drwxrwx--- 2 nobody users 224 2012-08-07 12:49 _gsdata_/ -rw-rw---- 1 nobody users 82052 2012-08-06 23:22 ._CIMG0058-u.jpg -rw-rw---- 1 nobody users 80258 2012-08-06 23:22 ._CIMG0058.jpg -rw-rw---- 1 nobody users 657796 2009-12-04 16:12 CIMG0058-u.jpg -rw-rw---- 1 nobody users 2997038 2009-11-27 09:22 CIMG0058.jpg I still got the same errors with rsync though... I'm using Goodsync on a mac to sync/backup files.
August 8, 201213 yr From the unraid menu... Under share settings yoy will find the settings on configuring the mover as well as a button to start it right away.
August 9, 201213 yr Author I still get the same errors unfortunately. Seems like the pictures are getting copied though, but not removed from cache drive. Aug 9 13:42:42 Atom emhttp: shcmd (62): /usr/local/sbin/mover |& logger & Aug 9 13:42:42 Atom logger: mover started Aug 9 13:42:42 Atom logger: moving Photo/ Aug 9 13:42:42 Atom logger: ./Photo/FOTOGRAF NANO 2012/Shutter stock/._shutterstock_108684953.tif Aug 9 13:42:42 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( Aug 9 13:42:42 Atom logger: .d..t...... Photo/ Aug 9 13:42:42 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/ Aug 9 13:42:42 Atom logger: .d..tp..... Photo/FOTOGRAF NANO 2012/Shutter stock/ Aug 9 13:42:42 Atom logger: >f+++++++++ Photo/FOTOGRAF NANO 2012/Shutter stock/._shutterstock_108684953.tif Aug 9 13:42:48 Atom logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Aug 9 13:42:48 Atom logger: ./Photo/FOTOGRAF NANO 2012/Shutter stock/shutterstock_108684953.tif Aug 9 13:42:48 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( Aug 9 13:42:48 Atom logger: .d..t...... Photo/ Aug 9 13:42:48 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/ Aug 9 13:42:48 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/Shutter stock/ Aug 9 13:42:48 Atom logger: >f+++++++++ Photo/FOTOGRAF NANO 2012/Shutter stock/shutterstock_108684953.tif Aug 9 13:42:51 Atom logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Aug 9 13:42:51 Atom logger: ./Photo/FOTOGRAF NANO 2012/Shutter stock/shutterstock_76435258.tif Aug 9 13:42:51 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( Aug 9 13:42:51 Atom logger: .d..t...... Photo/ Aug 9 13:42:51 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/ Aug 9 13:42:51 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/Shutter stock/ Aug 9 13:42:51 Atom logger: >f+++++++++ Photo/FOTOGRAF NANO 2012/Shutter stock/shutterstock_76435258.tif Aug 9 13:43:08 Atom logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Aug 9 13:43:08 Atom logger: ./Photo/FOTOGRAF NANO 2012/Shutter stock/._shutterstock_76435258.tif Aug 9 13:43:08 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( Aug 9 13:43:08 Atom logger: .d..t...... Photo/ Aug 9 13:43:08 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/ Aug 9 13:43:08 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/Shutter stock/ Aug 9 13:43:08 Atom logger: >f+++++++++ Photo/FOTOGRAF NANO 2012/Shutter stock/._shutterstock_76435258.tif Aug 9 13:43:08 Atom logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Aug 9 13:43:08 Atom logger: ./Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/full size til arkiv/01 Ramsland, Henrik Print???/.__MG_2912.jpg Aug 9 13:43:08 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( Aug 9 13:43:08 Atom logger: .d..t...... Photo/ Aug 9 13:43:08 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/ Aug 9 13:43:08 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/ Aug 9 13:43:08 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/full size til arkiv/ Aug 9 13:43:08 Atom logger: >f......... Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/full size til arkiv/01 Ramsland, Henrik Print#357#200#250/.__MG_2912.jpg Aug 9 13:43:09 Atom logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Aug 9 13:43:09 Atom logger: ./Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/full size til arkiv/01 Ramsland, Henrik Print???/.__MG_2916.jpg Aug 9 13:43:09 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( Aug 9 13:43:09 Atom logger: .d..t...... Photo/ Aug 9 13:43:09 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/ Aug 9 13:43:09 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/ Aug 9 13:43:09 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/full size til arkiv/ Aug 9 13:43:09 Atom logger: >f......... Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/full size til arkiv/01 Ramsland, Henrik Print#357#200#250/.__MG_2916.jpg Aug 9 13:43:09 Atom logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Aug 9 13:43:09 Atom logger: ./Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/full size til arkiv/01 Ramsland, Henrik Print???/.__MG_2995.jpg Aug 9 13:43:09 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( ....
August 9, 201213 yr Okay.... So the files move but they are not removed from the cache drive, that should be a rights issue that should have been solved by running the permissions utility (I am assuming that the permissions utility also runs on the cache drive). Just to be sure try it by hand: - Log on to the server using telnet, use root or SU to root after logging in; - go to /mnt - issue the following commands: chgrp -R users cache chown -R nobody cache chmod -R 770 cache - Log off from telnet - Try the mover again Note: the chmod command probably is not completely correct, it now sets an execute bit to non executable files, works though... I am not sure how to differentiate between files and dirs using chmod.
August 17, 201213 yr Author Sorry for the late reply. I have still not managed to solve this. I tried to run the commands you listed and running the mover again. Still same error messages. Looks like all files/dirs were correct before running the commands (files were 660 without exec bit). I also deleted all created users in unraid and just copy files to the cache using guest through SMB. Still same errors. I found another tread on the forum with a problem like this that was found to be hardware error. I checked that and I don't have anything that could show hardware errors in the syslog. I haven't changed anything in the config files or running any addons. Could my mover script be wrong?
August 21, 201213 yr Author Just ran a memtest. Completed with 0 errors. Can't seem to find out whats causing this. I attached my syslog if anyone wants to have a look and maybe suggest some other things to try. syslog.txt
August 22, 201213 yr Author Ran reiserfsck on md1-4 and sdf1 (cache), according to the wiki article. No corruptions found on any of them.
September 8, 201213 yr Did you ever solve this? I am having the exact same issue. Mover moves the files, but does not delete them from the cache drive. Ran memtest, parity checks, reiserfs checks, all are good. Sep 8 05:33:12 Orion logger: ./Videos/TV Shows/The NASA Missions - When We Left Earth/Episode 2.mkv Sep 8 05:33:12 Orion logger: .d..t...... ./ Sep 8 05:33:12 Orion logger: rsync: get_xattr_data: lgetxattr("Videos","user.org.netatalk.supports-eas.73iiB3",0) failed: Exec format error ( Sep 8 05:33:12 Orion logger: .d..t.....x Videos/ Sep 8 05:33:12 Orion logger: .d..t...... Videos/TV Shows/ Sep 8 05:33:12 Orion logger: .d..t...... Videos/TV Shows/The NASA Missions - When We Left Earth/ Sep 8 05:33:12 Orion logger: >f+++++++++ Videos/TV Shows/The NASA Missions - When We Left Earth/Episode 2.mkv Sep 8 05:36:08 Orion logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Sep 8 05:36:08 Orion logger: ./Videos/TV Shows/The NASA Missions - When We Left Earth/Episode 6.mkv Sep 8 05:36:08 Orion logger: .d........x Videos/ Sep 8 05:36:08 Orion logger: .d..t...... Videos/TV Shows/The NASA Missions - When We Left Earth/ Sep 8 05:36:08 Orion logger: >f+++++++++ Videos/TV Shows/The NASA Missions - When We Left Earth/Episode 6.mkv
September 8, 201213 yr Try changing RAM config. Use only one stick or a different slot or stick. There is a recent thread where RAM passed memtest but was still causing the issue.
September 9, 201213 yr Try changing RAM config. Use only one stick or a different slot or stick. There is a recent thread where RAM passed memtest but was still causing the issue. Thanks, this was actually a VM in esxi. I think i finally found the problem though. I did not have the 'min free space" set on the user share and 4 of my disks were 99% full. After setting that and rebooting the mover script is running and deleting it from the cache drive. Thanks for the assistance though.
March 28, 201313 yr I backup alot of photos regularly to a SSD cache disk to be moved to the array. However, most of the time this doesn't work. Often the files just stays at the cache drive without being moved. Sometimes the files are copied but not deleted from the cache drive. This is what fills the mover log: Aug 7 07:54:10 Atom logger: mover started Aug 7 07:54:10 Atom logger: moving Photo/ Aug 7 07:54:10 Atom logger: ./Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/full size til arkiv/01 Ramsland, Henrik Print?\200? Aug 7 07:54:10 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( Aug 7 07:54:10 Atom logger: .d..t...... Photo/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/full size til arkiv/ Aug 7 07:54:10 Atom logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Aug 7 07:54:10 Atom logger: ./Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/full size til arkiv/avis og tk?\200? Aug 7 07:54:10 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( Aug 7 07:54:10 Atom logger: .d..t...... Photo/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/Henrik Ramsland 12.04.12/full size til arkiv/ Aug 7 07:54:10 Atom logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Aug 7 07:54:10 Atom logger: ./Photo/FOTOGRAF NANO 2012/Alfred 02.08.12/collage Aug 7 07:54:10 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( Aug 7 07:54:10 Atom logger: .d..t...... Photo/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/ Aug 7 07:54:10 Atom logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Aug 7 07:54:10 Atom logger: ./Photo/FOTOGRAF NANO 2012/Alfred 02.08.12/Alfred 02.08.12/JPG Aug 7 07:54:10 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( Aug 7 07:54:10 Atom logger: .d..t...... Photo/ Aug 7 07:54:10 Atom logger: .d..t...... Photo/FOTOGRAF NANO 2012/ Aug 7 07:54:10 Atom logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Aug 7 07:54:10 Atom logger: ./Photo/FOTOGRAF NANO 2012/Alfred 02.08.12/Alfred 02.08.12/_MG_8188.dng Aug 7 07:54:10 Atom logger: rsync: get_xattr_data: lgetxattr("Photo","user.org.netatalk.supports-eas.zQdo9D",0) failed: Exec format error ( ..... ...and it just goes on like this. I tried copying to the cache disk both through SMB and AFP. Using Unraid 5.0 rc5. Anyone knows how to fix these errors? @Hoox You have corrupted/damaged extended attributes. Run the following command: getfattr -d /mnt/user0/%name of your share% See if you have any entries come back with "user.org.netatalk.supports-eas.%%%%%%: Exec format er" or post your results.
March 29, 201313 yr I ended up deleting the contents on my cache drive per a comment I saw on another thread and starting over. This seemed to solve my problem but doesn't solve for why this started. If it happens again I'll post my log. Thanks!
April 10, 201313 yr Im also starting get this error i dont why, i just look why i have full cache driver ... after check syslog i find this same issue Im already make: - check filesystem with rebuild tree on all disk include cache - backup cache driver and format (after that recovery files and make more space) - delate super.dat - and assigned once again disks - check minimal space i shares config (if is correct) And still i get this same error on command getfattr -d /mnt/user0/* I get root@unRAID:~# getfattr -d /mnt/user0/* /mnt/user0/movies: user.org.netatalk.supports-eas.0iHnRO: Input/output error /mnt/user0/movies: user.org.netatalk.supports-eas.O68qUA: Input/output error /mnt/user0/movies: user.org.netatalk.supports-eas.ejvw87: Input/output error /mnt/user0/movies: user.org.netatalk.supports-eas.yeSXha: Input/output error /mnt/user0/music: user.org.netatalk.supports-eas.kh23u8: Exec format error /mnt/user0/music: user.org.netatalk.supports-eas.nGkktb: Exec format error getfattr: Removing leading '/' from absolute path names # file: mnt/user0/stuff user.org.netatalk.supports-eas.1Qumte=0seWVzAA== user.org.netatalk.supports-eas.3bj61N=0seWVzAA== user.org.netatalk.supports-eas.3j0qX7=0seWVzAA== /mnt/user0/stuff: user.org.netatalk.supports-eas.7YWTyE: Exec format error /mnt/user0/stuff: user.org.netatalk.supports-eas.9JcKAv: Exec format error user.org.netatalk.supports-eas.ANWu6f=0seWVzAA== user.org.netatalk.supports-eas.CWv0aW=0seWVzAA== user.org.netatalk.supports-eas.GZ5RuG=0seWVzAA== user.org.netatalk.supports-eas.IVjtQi=0seWVzAA== user.org.netatalk.supports-eas.Jdz2Bq=0seWVzAA== user.org.netatalk.supports-eas.Kc6jLE=0seWVzAA== /mnt/user0/stuff: user.org.netatalk.supports-eas.NDwloI: Exec format error /mnt/user0/stuff: user.org.netatalk.supports-eas.NrLERs: Exec format error user.org.netatalk.supports-eas.USKGXs=0seWVzAA== user.org.netatalk.supports-eas.WDZDiv=0seWVzAA== user.org.netatalk.supports-eas.fsMx0h=0seWVzAA== user.org.netatalk.supports-eas.gyl6Cw=0seWVzAA== /mnt/user0/stuff: user.org.netatalk.supports-eas.h9YD5d: Exec format error user.org.netatalk.supports-eas.hC1SEd=0seWVzAA== user.org.netatalk.supports-eas.hhyVA9=0seWVzAA== user.org.netatalk.supports-eas.jP5XOX=0seWVzAA== user.org.netatalk.supports-eas.k07dOK=0seWVzAA== user.org.netatalk.supports-eas.m9yB0E=0seWVzAA== /mnt/user0/stuff: user.org.netatalk.supports-eas.nMrNnh: Exec format error /mnt/user0/stuff: user.org.netatalk.supports-eas.odpdCG: Exec format error /mnt/user0/stuff: user.org.netatalk.supports-eas.p7erDd: Exec format error /mnt/user0/stuff: user.org.netatalk.supports-eas.ps6HZV: Exec format error /mnt/user0/stuff: user.org.netatalk.supports-eas.qZbiVi: Exec format error /mnt/user0/stuff: user.org.netatalk.supports-eas.s7C72U: Exec format error user.org.netatalk.supports-eas.tsGTw4=0seWVzAA== user.org.netatalk.supports-eas.xMuYr5=0seWVzAA== user.org.netatalk.supports-eas.yK5oXj=0seWVzAA== So im delate folder stuff, please now me help how i can fix other errors without delating folders how i can find corrupted files ? or maybe any other solution for fix that ? Im also interested why now some users start reporting this error - some rc12 issue ? (why this happens me, my unraid working mouths without any touching - just upgrades) (btw. all users with this issue use latest version ?? )
Archived
This topic is now archived and is closed to further replies.