August 16, 201213 yr Hi, I am currently running the Release Candidate of Windows Server 2012, with the Hyper-V role installed. I have had some success in getting a Virtualised unraid server running, but I have hit a snag with the Network. UnRaid doesn't seem to support the Network card that is offered by the Hyper-V Host. This is a bit odd, because the Hyper-V integration components are supposed to be part of the Linux kernel: http://www.thomasmaurer.ch/2012/03/install-ubuntu-12-04-on-hyper-v/ For those of you who are interested, here is how I created the bootable unraid VM: (Please note that this is all done from a Win2012 server using powershell) Step 1) Create a Disk to hold the unraid OS. This would typically be your USB drive, but since there is no USB pass-through we will create a 1GB Disk. PS C:\Users\Administrator> new-vhd UNRAID.vhd 1GB ComputerName : FRACTAL Path : C:\Users\Administrator\UNRAID.vhd VhdFormat : VHD VhdType : Dynamic FileSize : 8192 Size : 1073741824 MinimumSize : LogicalSectorSize : 512 PhysicalSectorSize : 512 BlockSize : 2097152 ParentPath : FragmentationPercentage : 0 Alignment : 1 Attached : False DiskNumber : IsDeleted : False Number : Step2) We now need to attach the VHD to the host, so that we can partition it and get it ready for unraid PS C:\Users\Administrator> mount-vhd unraid.vhd Step3) Now that this disk is attached to the host, we need to partition it. PS C:\Users\Administrator> diskpart DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 111 GB 0 B * Disk 1 Online 111 GB 0 B Disk 2 Online 931 GB 0 B * Disk 3 Offline 1397 GB 0 B Disk 4 Online 1397 GB 0 B Disk 5 Online 1024 MB 1024 MB DISKPART> select disk 5 Disk 5 is now the selected disk. Step4) Now that we have selected the newly created disk, we need to create a partition, mark it as active. DISKPART> create partition primary DiskPart succeeded in creating the specified partition. DISKPART> list partition Partition ### Type Size Offset ------------- ---------------- ------- ------- * Partition 1 Primary 1022 MB 64 KB DISKPART> select partition 1 Partition 1 is now the selected partition. DISKPART> active DiskPart marked the current partition as active. Step5) Now we need to format the partition, label the disk and assign it a letter so that the host can write data to it. DISKPART> list volume Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- Volume 0 C NTFS Partition 111 GB Healthy Boot Volume 1 Recovery NTFS Partition 300 MB Healthy Hidden Volume 2 FAT32 Partition 100 MB Healthy System Volume 3 D VHDs NTFS Partition 111 GB Healthy Volume 4 E OneTB NTFS Partition 931 GB Healthy Volume 5 F OneFiveTB_1 NTFS Partition 1397 GB Healthy Volume 6 RAW Partition 1022 MB Healthy DISKPART> select volume 6 Volume 6 is the selected volume. DISKPART> format FS=FAT LABEL=UNRAID 100 percent completed DiskPart successfully formatted the volume. DISKPART> assign letter=J DISKPART> exit Leaving DiskPart... Step6) Now that we have the drive ready, we need to copy unraid to the drive and make it bootable. PS C:\Users\Administrator\downloads> copy-item 'C:\Users\Administrator\Downloads\unRAID Server 4.7 AiO\*' -Destination J:\ -recurse PS C:\Users\Administrator\downloads> cd j: PS J:\> PS J:\> .\syslinux.exe -ma J: -f Step7) Now we need to dismount the Disk, so that it can be attached to a Virtual PS J:\> cd c:\ PS C:\> PS C:\> Dismount-VHD C:\Users\Administrator\UNRAID.vhd Step8) Create a VM, attach the newly created disk, add a network interface. PS C:\> Get-VMSwitch Name SwitchType NetAdapterInterfaceDescription ---- ---------- ------------------------------ Intel NIC1 vSwitch External Intel(R) PRO/1000 PT Dual Port Network Connection Intel NIC2 SRIOV External Intel(R) PRO/1000 PT Dual Port Network Connection #2 PS C:\> New-VM -Name "UnRaid47" -MemoryStartupBytes 2GB -VHDPath C:\Users\Administrator\UNRAID.vhd -SwitchName "Intel NIC2 SRIOV" Name State CPUUsage(%) MemoryAssigned(M) Uptime Status ---- ----- ----------- ----------------- ------ ------ UnRaid47 Off 0 0 00:00:00 Operating normally PS C:\> Start-VM -Name UnRaid47 The VM starts in an extremely short time... but logging in as root and running ifconfig shows only the loopback address (127.0.0.1) Any ideas? Tested with 4.7, 5.0RC5 and RC6_Test2
August 16, 201213 yr Do you have 2 network cards in your hyper-v server ? I've used the 2008 hyper-v server (core edition) extensively and when I used the same nic for both the management interface (host networking) and the vm's I've always had problems.
August 16, 201213 yr According to MS, the driver package is a manual install on CentOS and Redhat, and only included in Suse out of the box. See: http://technet.microsoft.com/library/hh831531.aspx The driver package etc is here: http://www.microsoft.com/en-us/download/details.aspx?id=28188 I don't think you'll have any luck getting the NIC running on 2012 Hyper-V until someone develops a driver package for it.
August 16, 201213 yr Author Do you have 2 network cards in your hyper-v server ? I've used the 2008 hyper-v server (core edition) extensively and when I used the same nic for both the management interface (host networking) and the vm's I've always had problems. I actually have 4 NICs in the server! Two on the Supermicro board (one not supported by WinServer, thanks Intel) A dual port Intel Pro NIC. I am not sharing any NIC between host and hyper-v. The NIC is just the first hurdle too, there is no way to pass USB to the guest so I have no idea on how to use a licensed copy of unraid It would be nice to use just one server at home.
August 16, 201213 yr Maybe just go for free ESXi 5 instead, since plenty of us have that working? echo this
August 17, 201213 yr Author I guess that I could use ESXi, but I was hoping to do it all on Windows to help learn HyperV.
Archived
This topic is now archived and is closed to further replies.