Hi folks,

 

I've been trying to figure out a solution to this problem and have been looking everywhere for what the problem may be and I decided that I need to post it, because I just have no idea what to do.

 

My problem is that the ethernet speeds are capped at 10mb/s.

 

I was trying to upgrade from 4.7 to 5.0rc8, but decided that it got too complicated that I decided to revert right back to 4.7 and deal with setting it up again another time. So when I reverted, my ethernet transfer was capped at 10mb/s.

 

This if from my ethinfo in unMenu.

 

NIC info (from ethtool)

Settings for eth0:

Supported ports: [ TP MII ]

Supported link modes:  10baseT/Half 10baseT/Full

                        100baseT/Half 100baseT/Full

                        1000baseT/Half 1000baseT/Full

Supports auto-negotiation: Yes

Advertised link modes:  1000baseT/Full

Advertised auto-negotiation: Yes

Speed: 10Mb/s

Duplex: Half

Port: MII

PHYAD: 0

Transceiver: internal

Auto-negotiation: on

Supports Wake-on: pumbg

Wake-on: g

Current message level: 0x00000033 (51)

Link detected: yes

 

So is there any suggestions? I think I had messed with something that caused it go bonkers like this. (Setting new permission on 5.0 maybe?) I have no idea. The unRaid server is sitting in a closet that is connected via cat6 to a switch and then cat6 to the router.

 

Thanks in advance.

Speed: 10Mb/s

Duplex: Half

 

That's pretty much as slow as it gets.  Try replacing the cable and/or plugging into another switch port.  If you are having the same issue on 5 and 4.7, it's unlikely it's related to the OS.

 

What switch are you using? Brand model number etc.

 

Sent from my SGH-I727R using Tapatalk 2