RickInHouston Posted November 30, 2012 Share Posted November 30, 2012 I've been up and running with an UnRaid server for three years, at least. As always been solid. Haven't had a need to access movies on it for about a week. Now, today, go to move movies onto my unRaid and Windows Explorer sees 'tower' in network but can't access it. I did a reboot and heard all the beeps and went back and still can't see into tower (and the five drives). Next I open up web interface and find it's not finishing mounting two drives. I'm up to 307 reads / 130 writes and a whopping 2,078 errors and climbing (when I refresh the page). The other 'mounting' drive has 329 reads / 120 writes and 0 errors but doesn't mount. I'm going to let it run and see where it stops. I have had a drive failure over a year ago. I took the drive out, replaced it with a new drive and it repopulated just like it's intended. All worked well with that little glitch. What is currently happening? Do I have two drive failures? Quote Link to comment
dgaschk Posted December 1, 2012 Share Posted December 1, 2012 Attach a syslog and SMART reports. Sounds like there was an unclean shutdown and the journals are being replayed. This can take up to 30 minutes but usually take only a few. Quote Link to comment
RickInHouston Posted December 1, 2012 Author Share Posted December 1, 2012 Thanks. I'll work on this and get back, probably tomorrow. Thanks, again! Quote Link to comment
RickInHouston Posted December 1, 2012 Author Share Posted December 1, 2012 My syslog file is almost 800 KB and can only post max 192 KB. I've snipped the end of the file off to get under the limit. It's mostly the same information... over and over... Doesn't look good. I just don't remember a drive failing like this, though. I do run parity checks from time to time and they are always solid without errors. syslog.txt Quote Link to comment
JonathanM Posted December 1, 2012 Share Posted December 1, 2012 My syslog file is almost 800 KB and can only post max 192 KB. Zip it and post the zip archive. Repetitive text zips REALLY well. Quote Link to comment
RickInHouston Posted December 1, 2012 Author Share Posted December 1, 2012 Got it. Here's the syslog. Will work on SMART next. Full_syslog.zip Quote Link to comment
RickInHouston Posted December 1, 2012 Author Share Posted December 1, 2012 I'm going to shut my server down. Now over 9,000 errors on the one drive. Doesn't look like it's going to end. Will try different SATA cables tomorrow to see if that helps. Man, this ain't good. Quote Link to comment
RickInHouston Posted December 1, 2012 Author Share Posted December 1, 2012 Good news! Both remaining drives have mounted and a parity is being run. I'll let it run overnight. I might be okay! Weird! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.