I noticed that my preclear froze at 85% at the post read...I'm not quite sure what to do.  I guess rerun it.  Just curious does the array have to be started when running preclear or can I have the array stopped?

 

================================================================== 1.13

=                unRAID server Pre-Clear disk /dev/sdf

=              cycle 1 of 1, partition start on sector 64

= Disk Pre-Clear-Read completed                                      DONE

= Step 1 of 10 - Copying zeros to first 2048k bytes            DONE

= Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE

= Step 3 of 10 - Disk is now cleared from MBR onward.          DONE

= Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4      DONE

= Step 5 of 10 - Clearing MBR code area                              DONE

= Step 6 of 10 - Setting MBR signature bytes                      DONE

= Step 7 of 10 - Setting partition 1 to precleared state          DONE

= Step 8 of 10 - Notifying kernel we changed the partitioning  DONE

= Step 9 of 10 - Creating the /dev/disk/by* entries              DONE

= Step 10 of 10 - Verifying if the MBR is cleared.                DONE

= Post-Read in progress: 85% complete.

(  1,710,858,240,000  of  2,000,398,934,016  bytes read ) 64.3 MB/s

Disk Temperature: 34C, Elapsed Time:  31:16:01

 

oops nevermind.  The number just jumped to 86% after about 10min.  I didn't realize how slow it is even though it's running at 62mbps.