I just received an RMA replacement from seagate and got the following results.  Is this something to worry about?

 

========================================================================1.13

==  ST2000DM001-9YN164    Z1E060L2

== Disk /dev/sdi has been successfully precleared

== with a starting sector of 64

============================================================================

** Changed attributes in files: /tmp/smart_start_sdi  /tmp/smart_finish_sdi

                ATTRIBUTE  NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS      RAW_VALUE

      Raw_Read_Error_Rate =  117    100            6        ok          155675312

        Spin_Retry_Count =  100    100          97        near_thresh 0

        End-to-End_Error =  100    100          99        near_thresh 0

          High_Fly_Writes =    99    100            0        ok          1

  Airflow_Temperature_Cel =    62      67          45        near_thresh 38

      Temperature_Celsius =    38      33            0        ok          38

No SMART attributes are FAILING_NOW

 

0 sectors were pending re-allocation before the start of the preclear.

0 sectors were pending re-allocation after pre-read in cycle 1 of 1.

0 sectors were pending re-allocation after zero of disk in cycle 1 of 1.

0 sectors are pending re-allocation at the end of the preclear,

    the number of sectors pending re-allocation did not change.

0 sectors had been re-allocated before the start of the preclear.

0 sectors are re-allocated at the end of the preclear,

    the number of sectors re-allocated did not change.

 

Thanks,

Marcus

I just received an RMA replacement from seagate and got the following results.  Is this something to worry about?

No.