I have a small SSD that I am using for cache, 30gb.  I get the HPA warning on that drive, but have no clickable link in the ID field to fix it with.  I guess that I should input it into the list and reboot, but I really did not want to reboot to fix it.

 

Any ideas why the ID field is not showing up for the device?  It is working correctly.

Check your syslog and confirm that the kernel itself is reporting an HPA on the drive.  I don't know how the HPA is being detected for that screen, so it may be a false positive.  I don't really think an HPA matters though, on a Cache or extra drive, which is not an array drive.

I have the same deal with a 40GB SSD.  My guess it is just a size it does not recognize.

 

---

Unraid 5.0-rc10 - Asus M5A78L-MLX Plus - AMD Athlon II X3 450 Rana 3.2GHz - 8GB DDR3 - Antec NEO ECO 620W - Antec Three Hundred Case - 1x Rosewill RC-211 - Parity: 1T Seagate ST1000DM005/HD103SJ - DATA: 3x WD Black 750G - 1x 1T Seagate ST1000DM003 - 1x 500G Seagate ST500DM002, Cache: Intel X25-V SSD 40GB

I've seen the same warning on a small 30GB SSD drive using a non-Gigabyte motherboard, so I think it's safe to ignore.  You can set a custom drive attribute of hpa_ok with a value of 1 to disable the warning for the disk if you'd like.

I wanted to set it to ignore it, but in the screen shot there is not a link in the ID field.  So, there is nothing to click and set.  I am more concerned about the lack of the clickable field than I am about the false error.

 

I am running rc8.