February 4, 201313 yr Hi all. I was able to add drives before using the UnRAID menu but just recently installed Simple Features and an having some trouble. I'm trying to add a new drive to my array. The Main menu in Simple Features shows 1 drive detected and I assign the drive. I check the checkbox and click START to start the clearing process, however the web GUI just refreshed with START unchecked and greyed out. The drive is still assigned but nothing starts when I click it again. Any ideas? Thanks! Phil Currently using: Unraid 5.0-rc10 with Simple Features
February 4, 201313 yr well i had similar thing this weekend not sure why too but after preclearing the drive it worked .... not sure what caused it ... i assumed it was the new drive who didn't had the "unraid" new mark ... try preclearing it ...
February 4, 201313 yr Any ideas? No, since you did not supply a syslog for analysis.Currently using: Unraid 5.0-rc10 with Simple Features You might want to upgrade to rc1 or rc11a.
February 5, 201313 yr Author No, since you did not supply a syslog for analysis. Oh, sorry, my bad, just realized I forgot to attach it, current log attached. You might want to upgrade to rc1 or rc11a. I'll give that a try as well. Also my system specs: unRAID Version: unRAID Server Pro, Version 5.0-rc10 Motherboard: ASUSTeK - M5A78L-M Processor: AMD SempronTM 145 - 2.8 GHz Cache: L1 = 128 kB L2 = 1024 kB L3 = 0 kB Memory: 4864 MB - DIMM0 = 1066 MHz DIMM1 = 1066 MHz Network: 1000Mb/s - Full Duplex Uptime: 0 days, 22 hrs, 0 mins, 5 secs Thanks, Phil syslog.zip
February 6, 201313 yr Author Updated to Beta RC11a, still no change. Updated log attached. Thanks, Phil syslog.zip
Archived
This topic is now archived and is closed to further replies.