February 8, 201313 yr I'm sure this is a simple question, but better safe than sorry... I restarted UnRaid a few hours ago to see only a dreaded blinking cursor after reboot. Doing some reading, I copied my flash drive and then reformatted it. Now, I have UnRaid reinstalled and working, but I need to reassign my drives to "parity", "disk1", "cache", etc. and the only info I have is the syslog from my prior setup. I am assuming that this should point me to the correct thing: Feb 4 17:20:19 Tower kernel: md: import disk0: [8,48] (sdd) Hitachi_HDS5C3020ALA632_ML0220F30E938D size: 1953514552 Feb 4 17:20:19 Tower kernel: mdcmd (2): import 1 8,64 1953514552 Hitachi_HDS5C3020ALA632_ML0220F30BL93D Feb 4 17:20:19 Tower kernel: md: import disk1: [8,64] (sde) Hitachi_HDS5C3020ALA632_ML0220F30BL93D size: 1953514552 Feb 4 17:20:19 Tower emhttp: shcmd (3): /usr/local/sbin/emhttp_event driver_loaded Feb 4 17:20:19 Tower emhttp_event: driver_loaded Feb 4 17:20:19 Tower kernel: mdcmd (3): import 2 8,80 976762552 WDC_WD10EAVS-32D7B1_WD-WCAU49062402 Feb 4 17:20:19 Tower kernel: md: import disk2: [8,80] (sdf) WDC_WD10EAVS-32D7B1_WD-WCAU49062402 size: 976762552 Feb 4 17:20:19 Tower kernel: mdcmd (4): import 3 8,32 1953514552 WDC_WD20EARX-00PASB0_WD-WCAZAD005821 Feb 4 17:20:19 Tower kernel: md: import disk3: [8,32] (sdc) WDC_WD20EARX-00PASB0_WD-WCAZAD005821 size: 1953514552 Feb 4 17:20:19 Tower kernel: mdcmd (5): import 4 8,16 1953514552 WDC_WD20EARX-00PASB0_WD-WMAZA7525238 Feb 4 17:20:19 Tower kernel: md: import disk4: [8,16] (sdb) WDC_WD20EARX-00PASB0_WD-WMAZA7525238 size: 1953514552 Feb 4 17:20:19 Tower kernel: mdcmd (6): import 5 0,0 with disk0 = parity and disk 1-4 equal to disk 1-4, (leaving the cache drive to be whatever drive is left). Can anyone provide a quick sanity check on this before I commit to it Thanks!
Archived
This topic is now archived and is closed to further replies.