February 14, 201313 yr I just tried to install 5.0-rc11 and I can't seem to access my server remotely. I have replaced all the root files with those from the AiO, and ran make_bootable.bat as administrator. The server still has the same static IP from 4.7 when I check eth0, but it can't even ping the gateway. When I revert back to the 4.7 files in the root of the flash drive, the server works just fine. Did I just completely miss something in the instructions? Server here -> http://lime-technology.com/forum/index.php?topic=18627
February 14, 201313 yr I just tried to install 5.0-rc11 and I can't seem to access my server remotely. It would help us if you stated which interface(s) you've tried (eg telnet or browser), what you're actually typing, and what response, if any, you see.
February 14, 201313 yr Please check the Migrating from unRAID 4.7 to unRAID 5.0 page. It mentions one gotcha that sounds similar to what you are seeing, if you happen to have multiple NIC's in your server. The kernel in the newer UnRAID releases may not setup the NIC's in the same order as older releases, so you may end up connected to eth1 instead of eth0, and UnRAID only uses eth0.
February 14, 201313 yr Author Please check the Migrating from unRAID 4.7 to unRAID 5.0 page. It mentions one gotcha that sounds similar to what you are seeing, if you happen to have multiple NIC's in your server. The kernel in the newer UnRAID releases may not setup the NIC's in the same order as older releases, so you may end up connected to eth1 instead of eth0, and UnRAID only uses eth0. Bah, it's always something more simple then I try to make it! That did the trick RobJ, many thanks Over eager and couldn't scroll to the bottom
Archived
This topic is now archived and is closed to further replies.