Dummies Guide To Adding A AOC-SASLP-MV8, Is There One?


Recommended Posts

There isn't really one, because it is not needed, with almost all modern computers it will just work.

 

Some older computers had an issue where the computers motherboard BIOS didn't have enough room reserved for the current BIOS of the SASLP and then you would need a different BIOS on the motherboard, or an older smaller one on the card.

 

The only thing as you mention, it would be useful to disable the INT13 function in the BIOS of the SASLP, this is because INT13 is used to get a list of all the drives, and since that order can change depending on how fast drives spin up, it will mess up the boot order, and it means your computer would not start unraid after setting it up, without rebooting and changing/setting a new bootorder.

 

Disabling INT13 in the card means that the drives would not be added as bootable and so after setting the BIOS of the computer to start the USB-device that unraid was installed on, it would keep working if the SASLP changed the order of drives attached to it.

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.