Should this be of any concern?  Any idea what is going on?

Otherwise do not see any errors

 

Mar 12 14:47:47 Tower kernel: sd 3:0:0:0: attempting task abort! scmd(c424d3c0)
Mar 12 14:47:47 Tower kernel: sd 3:0:0:0: [sdk] CDB: cdb[0]=0x85: 85 06 20 00 00 00 00 00 00 00 00 00 00 40 e5 00
Mar 12 14:47:47 Tower kernel: scsi target3:0:0: handle(0x0009), sas_address(0x4433221100000000), phy(0)
Mar 12 14:47:47 Tower kernel: scsi target3:0:0: enclosure_logical_id(0x500605b003eed420), slot(3)
Mar 12 14:47:50 Tower kernel: sd 3:0:0:0: task abort: SUCCESS scmd(c424d3c0)
Mar 12 14:48:11 Tower kernel: sd 3:0:0:0: attempting task abort! scmd(c69909c0)
Mar 12 14:48:11 Tower kernel: sd 3:0:0:0: [sdk] CDB: cdb[0]=0x12: 12 00 00 00 24 00
Mar 12 14:48:11 Tower kernel: scsi target3:0:0: handle(0x0009), sas_address(0x4433221100000000), phy(0)
Mar 12 14:48:11 Tower kernel: scsi target3:0:0: enclosure_logical_id(0x500605b003eed420), slot(3)
Mar 12 14:48:14 Tower kernel: sd 3:0:0:0: task abort: SUCCESS scmd(c69909c0)
Mar 12 14:48:21 Tower kernel: sd 3:0:0:0: attempting task abort! scmd(c424d600)
Mar 12 14:48:21 Tower kernel: sd 3:0:0:0: [sdk] CDB: cdb[0]=0x85: 85 06 20 00 00 00 00 00 00 00 00 00 00 40 98 00
Mar 12 14:48:21 Tower kernel: scsi target3:0:0: handle(0x0009), sas_address(0x4433221100000000), phy(0)
Mar 12 14:48:21 Tower kernel: scsi target3:0:0: enclosure_logical_id(0x500605b003eed420), slot(3)
Mar 12 14:48:22 Tower kernel: sd 3:0:0:0: task abort: SUCCESS scmd(c424d600)

 

 

Check for a firmware update for your card.

hi RobJ,

 

what is the procedure to update the card in regards to unRAID?

 

Once the card is upgraded, how will unRAID understand the previous disk allocation to slots and all?

A firmware flash ins't going to change anything in unraid and dev assignments, i think thats all hardware. With unraid your just passing data through the card like a basic sata card without raid function not running it in raid mode. Hell worst case just write down hdd to disk mount point and resign them that way, but at a hardware point of view i have never seen or herd of a way to change ports assignments via firmware, lol you could rewire a sas breakout to sata to do so though