March 14, 201313 yr hi im getting the nobody card disabling IRQ 16 error. it happens about 5 minutes after transferring general or sooner. when it happens write speeds go from 80mb/s to 2-3 mb/s IRQ 16 is a USB port and i have stopped using it. still happens this all started after i had my power supply fail. have had server for about 2 years no problems. i am runnign 5.0 rc11 no add ons anymore here is the system log
March 14, 201313 yr Author /usr/bin/tail -f /var/log/syslog Feb 4 18:55:40 Tower kernel: [] ? smp_apic_timer_interrupt+0x72/0x7f Feb 4 18:55:40 Tower kernel: [] ? common_interrupt+0x29/0x30 Feb 4 18:55:40 Tower kernel: [] ? mwait_idle+0x4a/0x50 Feb 4 18:55:40 Tower kernel: [] ? cpu_idle+0x4b/0x65 Feb 4 18:55:40 Tower kernel: [] ? start_secondary+0x9a/0x9c Feb 4 18:55:40 Tower kernel: handlers: Feb 4 18:55:40 Tower kernel: [] usb_hcd_irq Feb 4 18:55:40 Tower kernel: [] usb_hcd_irq Feb 4 18:55:40 Tower kernel: [] ahci_interrupt Feb 4 18:55:40 Tower kernel: Disabling IRQ #16
March 14, 201313 yr /usr/bin/tail -f /var/log/syslog Feb 4 18:55:40 Tower kernel: [] ? smp_apic_timer_interrupt+0x72/0x7f Feb 4 18:55:40 Tower kernel: [] ? common_interrupt+0x29/0x30 Feb 4 18:55:40 Tower kernel: [] ? mwait_idle+0x4a/0x50 Feb 4 18:55:40 Tower kernel: [] ? cpu_idle+0x4b/0x65 Feb 4 18:55:40 Tower kernel: [] ? start_secondary+0x9a/0x9c Feb 4 18:55:40 Tower kernel: handlers: Feb 4 18:55:40 Tower kernel: [] usb_hcd_irq Feb 4 18:55:40 Tower kernel: [] usb_hcd_irq Feb 4 18:55:40 Tower kernel: [] ahci_interrupt Feb 4 18:55:40 Tower kernel: Disabling IRQ #16 Run a memtest on the box for at least 8 hours to make sure nothing has gone wonky there, 24 hours would be better.
March 14, 201313 yr how would i go about doing that? reboot the machine and when the computer boots there should be a selection to start memtest.
March 16, 201313 yr hi im getting the nobody card disabling IRQ 16 error. it happens about 5 minutes after transferring general or sooner. when it happens write speeds go from 80mb/s to 2-3 mb/s IRQ 16 is a USB port and i have stopped using it. still happens this all started after i had my power supply fail. have had server for about 2 years no problems. i am runnign 5.0 rc11 no add ons anymore here is the system log I had this problem, but it only manifested when I used my KVM box to switch machines. I think that it was causing some garbage to be dumped to the USB port as the keyboard/mouse were disconnected from the box when I switched away from it. I "solved" this problem by simply plugging my keyboard and mouse into a different USB port. Don't quote me on this, but I think that each usb port (or pair of usb ports) uses a different IRQ, so moving it to a different port caused the problem to move to an IRQ that was not shared by anything important like my disk controller.
February 8, 201412 yr Hello, I'm getting also the 'disabling IRQ #16' error. The System slows then also down. Trying a different USB Port did not solve the Problem. I have tryed all Ports on the Mainboard and also an aditional USB PCIe Card. Always, after switching to a nother PC and then returning to the UnRaid System ( running 5.0.5 ) the IRQ #16 is disabled. The KVM is an ATEN CS64US USB KVM UnRaid System: MB Asus P8 H77-M Pro with 8GB Ram and two Supermicro AOC-SAS2LP-MV8. Any Help is welcome. cu Kyruss
Archived
This topic is now archived and is closed to further replies.