fliptoback Posted March 16, 2013 Share Posted March 16, 2013 Hi, I am new here and this is my first post. I have just bought a new HP Microserver N40L NAS with 2 x WD 3TB Red Drives. I have also installed UnRAID 5.0-rc11 on a usb stick. I have done the preclear and UnRAID is able to recognize the parity and disk1 with no issues. I first stop the array and set "Enable User Shares" in "settings" page to a "Yes". I then start the array and proceed to define the shares. These are the settings I use: Name: Movies Comments: Movies Allocation method: High Water Min. free space: 0 split level: 2 Include disk(s): I leave this blank Excluded disk(s): I leave this blank I then click "Add Share" and it appears to run a command but upon clicking the "shares" tab again, there are no shares defined. Could someone please enlighten me what I have done wrong? Many thanks I have also uploaded a screenshot of what my share page looks like. Quote Link to comment
fliptoback Posted March 16, 2013 Author Share Posted March 16, 2013 Apologies for this thread. I figured out what actually happen. It appears that there are errors on the reiserFS partition. A quick checkdisk fix the issues. I can then define shares properly. Consider this thread closed. Sorry again. Quote Link to comment
cynicaljoy Posted March 22, 2013 Share Posted March 22, 2013 fliptoback can you please update the topic of the original post to [sovled] and change the Message Icon for the original message to 'Defect [solved]'? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.