pjneder Posted April 22, 2013 Share Posted April 22, 2013 I need some help folks!!! Everything has been going great with my project to migrate my production 4.7 unRAID to 5.0, some new disks and then VM under ESXi. I am running 5.0-rc12a. During the process of moving my working VM onto a final production datastore, the disks showed up missing on the main page. I've pulled out the ESXi and went back to native booting directly from USB key. The best I can guess is that the SASLP-MV8 just started suffering massive problems. See the attached log file for all of the disk error problems. Setup: Intel DQ77MK with Core i5 w/ 16GB RAM Supermicro SASLP-MV8 card 6 HDD's (2x WD 3TB reds, 1x 2TB Hitachi and 3x 1TB Seagates) all attached to SASLP-MV8 card Crucial 2GB flash with unRAID Plus key Please help as my production server is down!!!! :'( :'( :'( Thanks!!!!!! syslog-problems1.zip Quote Link to comment
pjneder Posted April 22, 2013 Author Share Posted April 22, 2013 I making some progress on this. It is either 2 ports on the SATA4-7 connector or it is 2 cables on the SFF8087 cable. A few more experiments should yield the final results. Either way an RMA of something is in my immediate future. Sigh..... :'( :'( :'( :'( Quote Link to comment
pjneder Posted April 22, 2013 Author Share Posted April 22, 2013 Bad port 5 on the SASLP-MV8. It will be on it's way back to Newegg soon. I'll probably replace it with a M1015 instead. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.