This is the line of interest from the smartctl test

 

190 Airflow_Temperature_Cel 0x0022   068   033   045    Old_age   Always   In_the_past 32 (1 165 40 

 

I also ran a long smart test and it returned no erros.

 

I would paste the full results from the test, but it is not formatted correctly when I copy and paste from my telnet session. I am also too lazy to output it to a usb. Let me know if any other information would be helpful.

 

Here are a couple other values near their threshholds

 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0

I'd replace the drive -- at today's prices, there's no reason to take any chances.

 

I presume you have "known good" parity -- i.e. have run a fairly recent test with zero errors.

 

If not, then I'd copy all of the data off the failing disk; then replace it -- if the rebuild is successful you won't need the backed up data, but if not, you'll have it