Zaxxan Posted May 14, 2013 Share Posted May 14, 2013 Hi, I am currently running v5.0 R12a and it has been running really well. I have come across a problem with two of the disks in my array reporting zero space available when I know there should be approx 170GB on one and over 70GB on the other. It was reading the correct values and then after a reboot they now read zero. How do I correct this? Quote Link to comment
marcusone Posted May 14, 2013 Share Posted May 14, 2013 Where are you reading this from? Logon to the console and do a "df -h" Sent from my SGH-I727R using Tapatalk 2 Quote Link to comment
Zaxxan Posted May 14, 2013 Author Share Posted May 14, 2013 I'm reading it from the main GUI and windows. I've also tried to copy files to them and I get a message saying that the disk is full. Quote Link to comment
JonathanM Posted May 14, 2013 Share Posted May 14, 2013 Sounds like either file system corruption, or possibly user error. Are you sure nothing was on the cache drive to be moved? Perhaps your split level or disk allocation is too restrictive, and the drives filled because the mover script was disallowed from putting the files on other drives. After eliminating the possibility of user error, I'd run a file system check on the 2 offending drives. Quote Link to comment
Zaxxan Posted May 14, 2013 Author Share Posted May 14, 2013 No nothing has changed. I don't use a cache drive or mover script and I haven't copied any files to the array for about 6 months. The only thing I did was shutdown and reboot the server. Quote Link to comment
garycase Posted May 14, 2013 Share Posted May 14, 2013 Post a picture of the Web GUI display. Also, reboot again and see if that clears anything up. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.