limetech Posted June 7, 2013 Share Posted June 7, 2013 Refer to: http://lime-technology.com/forum/index.php?topic=27720.msg245580#msg245580 Link to comment
garycase Posted June 7, 2013 Share Posted June 7, 2013 A few details I posted ~ 6 weeks ago: http://lime-technology.com/forum/index.php?topic=27221.0 Link to comment
garycase Posted July 5, 2013 Share Posted July 5, 2013 Tom ... apparently this is still an issue in RC16a. See this thread (the last few posts): http://lime-technology.com/forum/index.php?topic=27448.msg241379#msg241379 Link to comment
garycase Posted July 7, 2013 Share Posted July 7, 2013 Update: The pre-clear in the thread I noted above finished, and the drive then added with no problem. It seems that RC16c still has the "can't clear new drives" issue !! Link to comment
garycase Posted July 7, 2013 Share Posted July 7, 2013 Tom, Correction ==> Just realized that the poster had NOT upgraded to RC16c before he tried to add a drive. He had upgraded a couple days ago ... but not to the latest version (sorry I missed that). I assume this issue has indeed been resolved in RC16c ... if there's any doubt you may want to add a drive to confirm it. I'd try it if I could, but don't have a system to do that with right now (my test system is a Basic install that's already maxed out with drives). Link to comment
Recommended Posts