June 25, 201313 yr Hi all, I have been using unRaid for a while now on my old hardware, but recently I finally put together my new computer and put the harddrives in there and everything was working extremely well. So I decided I should do a parity check. During the parity check, the system became completely unresponsive (webui, telnet, and at the computer itself). After restarting the computer the parity check started again. After about 10%, it became unresponsive again. I'm currently at about 30% and it seems like everything might be ok, but I don't want to go on thinking everything is ok when it's not. I currently have a telnet session open with the following command running "tail -f /var/log/syslog". I would appreciate if someone could look over my current log and see if there is anything out of the ordinary. I appreciate any help anyone can provide. Thank you! I'm currently on rc-15a. H/W: X9SCM-iiF Xeon E3-1240 v2 Seasonic X650 2 IBM M1015 flashed to IT Edit: So it finished without any errors, but I still feel a bit uneasy about the 2 lockups. syslog-2013-06-24.txt
Archived
This topic is now archived and is closed to further replies.