July 16, 201312 yr I replaced a bad drive and unraid came up and told me the disk was wrong. I selected the new one and it said replace disk. I click Start and it started but it is stuck on mounting disks. Spinning up all drives...Start array...Mounting disks... Does not make it past disk4 (which was the one I replaced) root@Tower:/boot# mount proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) tmpfs on /var/log type tmpfs (rw,size=128m) /dev/sdb1 on /boot type vfat (rw,noatime,nodiratime,umask=0,shortname=mixed) /dev/md1 on /mnt/disk1 type reiserfs (rw,noatime,nodiratime,user_xattr,acl) /dev/md2 on /mnt/disk2 type reiserfs (rw,noatime,nodiratime,user_xattr,acl) /dev/md3 on /mnt/disk3 type reiserfs (rw,noatime,nodiratime,user_xattr,acl) /dev/md4 on /mnt/disk4 type reiserfs (rw,noatime,nodiratime,user_xattr,acl) I have attached a syslog as well What can I do? syslog.txt
July 16, 201312 yr Author Finally after 3-5 minutes it mounted them all. Now the rebuild is going. Is it normal for it to take that long mounting. Usually it is pretty quick
July 17, 201312 yr Finally after 3-5 minutes it mounted them all. Now the rebuild is going. Is it normal for it to take that long mounting. Usually it is pretty quick I've seen it take over 30-45 minutes to replay the journal transactions and mount a disk when rebooting if there was a lot of activity prior to a non-clean shut down. You just need to patient AND, if using plugins or add-ons, they must wait for the disk they use to be mounted before attempting to use files on those disks.
Archived
This topic is now archived and is closed to further replies.