August 2, 201312 yr Hi all, I am having problems moving files from the cache to the array. A few days ago my power supply died which I have now replaced. This however resulted in an unscheduled shutdown of the server. All files/shares on the array are accessible and everything appears to be fine, but I get the errors below when the mover script executes. Disk1 currently shows 0 free space, but I do have high-water enabled on the share and it's always worked fine in the past - 2TB available on other drives included in the share. I've searched for similar posts - there's mention of setting min size above zero, checking hardware connections etc. all of which I have tried with no success. I have even set the drive to be excluded from the share these files are going to, but it still generates the error after a full reboot. If I manually move files from disk1 to another drive and then run the mover script, disk1 will fillup and then the errors appear again. All drives are online and accessible. Any ideas where to go from here? Aug 2 11:28:10 unRAID shfs0: shfs_write: write: (28) No space left on device Aug 2 11:28:10 unRAID logger: rsync: writefd_unbuffered failed to write 4 bytes [sender]: Broken pipe (32) (Minor Issues) Aug 2 11:28:10 unRAID logger: rsync: write failed on "/mnt/user0/[filename]": No space left on device (28) (Minor Issues) Aug 2 11:28:10 unRAID logger: rsync error: error in file IO (code 11) at receiver.c(298) [receiver=3.0.2] (Errors) Aug 2 11:28:10 unRAID logger: rsync: connection unexpectedly closed (31 bytes received so far) [sender] Aug 2 11:28:10 unRAID logger: rsync error: error in rsync protocol data stream (code 12) at io.c(635) [sender=3.0.2] (Errors) Name of file removed above, server v4.7
Archived
This topic is now archived and is closed to further replies.