Hello All,

 

I am running Version 5.0 and had a Disabled disk. This is the first time this ever happened so I did some research.  I read this but it's from 2010, so I'm not sure if it still applies to 5.0. I also read this which was posted by Joe L.

 

Here is what I was able to get after I ran the reiserfsck --check

 

root@Tower:~# reiserfsck --check /dev/md1
reiserfsck 3.6.21 (2009 www.namesys.com)

*************************************************************
** If you are using the latest reiserfsprogs and  it fails **
** please  email bug reports to [email protected], **
** providing  as  much  information  as  possible --  your **
** hardware,  kernel,  patches,  settings,  all reiserfsck **
** messages  (including version),  the reiserfsck logfile, **
** check  the  syslog file  for  any  related information. **
** If you would like advice on using this program, support **
** is available  for $25 at  www.namesys.com/support.html. **
*************************************************************

Will read-only check consistency of the filesystem on /dev/md1
Will put log info to 'stdout'

Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes
###########
reiserfsck --check started at Wed Oct 16 16:02:44 2013
###########
Replaying journal: Done.
Reiserfs journal '/dev/md1' in blocks [18..8211]: 0 transactions replayed
Checking internal tree.. finished
Comparing bitmaps..finished
Checking Semantic tree:
finished
No corruptions found
There are on the filesystem:
        Leaves 362245
        Internal nodes 2190
        Directories 438
        Other files 3400
        Data block pointers 366367226 (0 of them are zero)
        Safe links 0
###########
reiserfsck finished at Wed Oct 16 18:01:47 2013

 

 

Now the wiki says:

 

After running reiserfsck

 

If you are running UnRAID v5.0-beta8d or later and are in Maintenance mode, you can resume normal operations by stopping the array, then restarting the array with the Maintenance mode check box unchecked.

 

I did this and the drive is still disabled, does anyone have any suggestions for this old Marine?

 

Attach a zipped syslog.

dgaschk,

 

Thanks for the reply, I don't think my syslog would be of any good as I shutdown the pc when I got this msg a few days ago, and just turned it on again but here you go,

 

Pastebin

 

system_log.txt

Disk 1 (sdd) has a loose or bad SATA cable. Attach a screenshot of unRAID main.

Thanks again and here you go.

 

Reattach or replace the SATA cable then attach a new syslog.

I am going to have to shut down the system, will that be alright?

It is the only option.

Here is the pastebin

 

I really hope this helps. I unplugged the sata cables and ensured they where refastened.

system_log.txt

The log looks ok. Is the disk still disabled?

 

Yes sir not sure why though if the log is fine.

Once the disk is disabled, you need to rebuild it.  If you're sure it's actually good, you can force it to rebuild onto the same physical disk.

 

Stop the array; unassign the disk; then Start the array -- it will now show a missing disk.  Stop the array again; assign the disk back to the same slot; then Start the array -- it will now rebuild the disk.

 

dgaschk and garycase, thank you both for the help, I am starting the rebuild now, but is it normal for the invalid content icon to be on that drive right now that it is rebuilding? I don't want to stop it, I suppose I will let everything finish and report back the end results, but I just wanted to thank you both.

 

 

Attach another syslog.

Pastebin Link of SysLog

 

I have also attached a hard copy of the syslog. I truly appreciate all the help.

system_log.txt

Looks good. Must have been a loose SATA cable.

dgaschk Thanks. When I left it was still rebuilding. I'll check the status and if I don't have anymore issues I'll mark this as solved. Thanks again.

 

Sent from my SPH-L900 using Tapatalk