October 29, 201312 yr Ive installed a new drive into my array. I can add files to the disk itself, but when I go to add files to the shares, it shows up as no more room. I have three drives in the array, all 2tb drives including one for the parity. I should have 4tb of space for my shares, but only have 2tb total for my shares. Can anyone help?
October 29, 201312 yr Check your shares settings -- I suspect you have listed your original drive in the "Included" list ... which means no other drives are included in the share. Either remove that drive from the list [if nothing is listed in the Includes or Excludes, then all drives are included]; or add the new drive to the list.
October 29, 201312 yr Author On each of my share folders I had "Disk1, Disk2" in each "Included disk(s)" space. This should just be left blank? Tried it with them all blank, but no difference. When I look at properties on a mapped share, it shows only 2tb available as full... I should have the total of both drives (4tb). Don't know how to add the new drive to the array, so it increases the data 'pool'.
October 29, 201312 yr On each of my share folders I had "Disk1, Disk2" in each "Included disk(s)" space. This should just be left blank? Tried it with them all blank, but no difference. Did you restart the server after clearing them out?
October 29, 201312 yr Author no... i'll try that... Is that the 'refresh' button in the array status?
October 29, 201312 yr Author That totally worked! I went into Share Settings under Settings, and erased what was written in the 'Included disk(s)' space and left it blank. Now when I look at properties on my mapped share, it shows I now have a full 4 tb of space, 2 of which are used. Thanks so very much Johnathanm!
October 30, 201312 yr Your include parameters were wrong also. Disk1,Disk2 does not exist where as disk1,disk2 (Notice the small "D") does exist. Glad you got it working though. Sideband Samurai
Archived
This topic is now archived and is closed to further replies.