dahays Posted November 5, 2013 Share Posted November 5, 2013 So I had a bad drive. Bought a new 2 tb drive shut down the system put it in started and ran preclear. then ran format drive. It failed. I then tried it woth a second one it failed, thirdn failed also. It that point I took the 3 new 2tb drive put them in a new system started unraid from a second thumbdrive and it built the system out. Formatted the 2 drives and set the 3rd to parity. I have a norco 4224 and have moved the drives all around with no luck. Any suggetions? syslog.doc Quote Link to comment
dgaschk Posted November 6, 2013 Share Posted November 6, 2013 How are you formatting the drive? Quote Link to comment
dahays Posted November 6, 2013 Author Share Posted November 6, 2013 On the production box I bring the system down install the drive boot set it to the missing drive and check the box yes I want to format this drive and click format on the menu in unraid. I did the same thing with a different box and thumbdrive, I used 2 drives 1 party and one data and it formatted. I took it out and moved the drive to the production box and it won't format. I have tried moving it all around the chasis. Quote Link to comment
dgaschk Posted November 6, 2013 Share Posted November 6, 2013 On the production box I bring the system down install the drive boot set it to the missing drive and check the box yes I want to format this drive and click format on the menu in unraid. I did the same thing with a different box and thumbdrive, I used 2 drives 1 party and one data and it formatted. I took it out and moved the drive to the production box and it won't format. I have tried moving it all around the chasis. A replacement drive should never be formatted. When a failed drive is replaced, the entire partition is rebuilt. This includes formatting. Did the failed drive have a red ball showing on unRAID Main? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.