Hi all,

 

pretty new with UNRAID.

 

I'm on 5.0.4

1 Parity disk and 1 disk that has all the shares.

 

I enabled user shares, but left SMB open to public. I copied some files and folder to one of the share I created via a windows 7 desktop. Now, using the same station, I cannot delete the folders. Some other folders that I need to copy now say permission denied, yet all premissions are the same on that share.

 

What am I not getting?

also, when trying to delete the folders using MC, says Read-Only filesystem ?!?

syslog.

Dec 16 11:04:01 Tower shfs/user: shfs_unlink: unlink: /mnt/disk1/public/iMovie Projects/.AppleDouble/.Parent (30) Read-only file system

 

 

anyone know why the user share are readonly when when security is set to public?

Zip up and post the entire syslog.

im rebuilding now. I read that the read on file system could be due to a problem with the drive, so I am following the link below to see:

http://lime-technology.com/wiki/index.php/Check_Disk_Filesystems

 

this is what it gave me:

 

###########
reiserfsck --check started at Mon Dec 16 15:10:07 2013
###########
Replaying journal: Done.
Reiserfs journal '/dev/md1' in blocks [18..8211]: 0 transactions replayed
Checking internal tree.. finished
Comparing bitmaps..vpf-10640: The on-disk and the correct bitmaps differs.
Checking Semantic tree:
finished
1 found corruptions can be fixed when running with --fix-fixable
###########
reiserfsck finished at Mon Dec 16 15:13:02 2013
###########
root@UNRAID:~#

 

I will now execute that command.

 

My question is how will I know if the drive is now read/write?

Second is how do I adjust the Time as it's way off.

you'll probably have to reboot after the rieserfsck is done to get r/w access back.

 

date/time can be adjusted in the webgui

 

settings>data&time

 

set your time zone correctly then enable Use NTP "yes", and finally set the first ntp server to time.windows.com

 

 

this is what it came back with.

 

 

Will check consistency of the filesystem on /dev/md1
and will fix what can be fixed without --rebuild-tree
Will put log info to 'stdout'

Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes
###########
reiserfsck --fix-fixable started at Mon Dec 16 15:15:23 2013
###########
Replaying journal: Done.
Reiserfs journal '/dev/md1' in blocks [18..8211]: 0 transactions replayed


Checking internal tree.. finished
Comparing bitmaps..vpf-10630: The on-disk and the correct bitmaps differs. Will be fixed later.
Checking Semantic tree:
finished
No corruptions found
There are on the filesystem:
        Leaves 1
        Internal nodes 0
        Directories 4
        Other files 0
        Data block pointers 0 (0 of them are zero)
        Safe links 0
###########
reiserfsck finished at Mon Dec 16 15:18:38 2013
###########
root@UNRAID:~#

run the chk again (same as first) to verify no corruptions found.

i rebooted and re-ran reiserfsck --check /dev/md1

 

###########
reiserfsck --check started at Mon Dec 16 18:35:06 2013
###########
Replaying journal: Done.
Reiserfs journal '/dev/md1' in blocks [18..8211]: 0 transactions replayed
Checking internal tree.. finished
Comparing bitmaps..finished
Checking Semantic tree:
finished
No corruptions found
There are on the filesystem:
        Leaves 1
        Internal nodes 0
        Directories 6
        Other files 0
        Data block pointers 0 (0 of them are zero)
        Safe links 0
###########
reiserfsck finished at Mon Dec 16 18:37:48 2013
###########

is it resolved now?

also, post a COMPLETE copy of your syslog (attach to post).

not sure how to extract the syslog in order to attach here...

 

Here is the syslog

syslog.zip.zip

I'm getting all theses disk0 errors:

md: disk0 read error, sector=1246536344

 

Disk 0 is my parity drive.

 

How do you do the reiserfsck on that drive? I can do it on the other data drives, but unsure how to do it on this one.

 

ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: BMDMA stat 0x24
ata1.00: failed command: READ DMA EXT
ata1.00: cmd 25/00:00:e0:9e:4c/00:04:4a:00:00/e0 tag 0 dma 524288 in
         res 51/40:00:30:a0:4c/40:00:4a:00:00/00 Emask 0x9 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 1:0:0:0: [sda] Unhandled sense code
sd 1:0:0:0: [sda]
Result: hostbyte=0x00 driverbyte=0x08
sd 1:0:0:0: [sda]
Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
        4a 4c a0 30
sd 1:0:0:0: [sda]
ASC=0x11 ASCQ=0x4
sd 1:0:0:0: [sda] CDB:
cdb[0]=0x28: 28 00 4a 4c 9e e0 00 04 00 00
end_request: I/O error, dev sda, sector 1246535728
ata1: EH complete

The parity drive does not have a reiserfs file system, so you can't use reiserfsck on it. Besides, the error you posted is most likely a drive failure of some sort, and you need to pull a smart report on it to check that.

how do I do that?

 

how do I do that?

Read here.

thanks, as i see the smart is saying my parity drive is failing...

 

im replacing it with another drive that I will test first before putting in service.