This bug is not major but might cause some issues for those with small cache drives.

 

Tested Under 5.04

go to shares settings and check if the mover is set to the 1st day of the month.

change it to say daily and hit apply.  It will change.

now hit the move now button.

Assuming you have some content to move the "move now" button will become greyed out

and the schedule will reset to the 1st of the month.

 

Workaround :

Hit move now and wait for it to finish then reset the schedule to your preferred time / date.

 

HTH

 

Loophole

 

Attach a syslog.

UnRaid V 5.0.4

Apologies for not adding the syslog

Mover was set to Daily at 1am the syslog the mover shows moving a slew of files at abou that time.

I triggered the mover manually at approx (9:10 Am ) as there were no files to move not much shows. 

The interface has now reset back to 1st of the month. 

 

What other logs can I supply?

 

Regards

Loophole

 

 

syslog.txt

There are additional logs in /var/log. Enter "cp /var/log/syslog* /boot" The additional logs should appear on the flash. Zip and attach that file(s).

Additional Syslogs attached.

 

I noted in them there is a parse error for the mover cron daemon which may be the cause of the reset to monthly.

I also removed all the mover file log lines as they were 99% of the files anyway

 

Keep up the good work

 

Loophole

syslog.1.txt

syslog.2.txt

Start in safe-mode and test mover schedule.

Ok booted into safe mode and tested several moves. 

 

No change in schedule. 

Booted with webgui plugin installed and problem returns although I am unable to ascertain if the gui is just not parsing the params properly or if its actually adjusting the schedule.

Looks more like its the former.

 

So the next question is how does the community help fix/upgrade the webui plugin?  or are we even allowed?

 

As Unraid is really good many of us just want to contribute

 

Regards

 

Loophole

 

 

Getting this issue also on v5.0.5

Getting this issue also on v5.0.5

 

This seems to be fixed in the current webgui version.

Am also running 5.05 and just manually started the mover with no issue.

 

Regards