Loophole Posted December 19, 2013 Share Posted December 19, 2013 This bug is not major but might cause some issues for those with small cache drives. Tested Under 5.04 go to shares settings and check if the mover is set to the 1st day of the month. change it to say daily and hit apply. It will change. now hit the move now button. Assuming you have some content to move the "move now" button will become greyed out and the schedule will reset to the 1st of the month. Workaround : Hit move now and wait for it to finish then reset the schedule to your preferred time / date. HTH Loophole Quote Link to comment
dgaschk Posted December 25, 2013 Share Posted December 25, 2013 Attach a syslog. Quote Link to comment
Loophole Posted December 27, 2013 Author Share Posted December 27, 2013 UnRaid V 5.0.4 Apologies for not adding the syslog Mover was set to Daily at 1am the syslog the mover shows moving a slew of files at abou that time. I triggered the mover manually at approx (9:10 Am ) as there were no files to move not much shows. The interface has now reset back to 1st of the month. What other logs can I supply? Regards Loophole syslog.txt Quote Link to comment
dgaschk Posted December 28, 2013 Share Posted December 28, 2013 There are additional logs in /var/log. Enter "cp /var/log/syslog* /boot" The additional logs should appear on the flash. Zip and attach that file(s). Quote Link to comment
Loophole Posted December 29, 2013 Author Share Posted December 29, 2013 Additional Syslogs attached. I noted in them there is a parse error for the mover cron daemon which may be the cause of the reset to monthly. I also removed all the mover file log lines as they were 99% of the files anyway Keep up the good work Loophole syslog.1.txt syslog.2.txt Quote Link to comment
dgaschk Posted December 29, 2013 Share Posted December 29, 2013 Start in safe-mode and test mover schedule. Quote Link to comment
Loophole Posted January 6, 2014 Author Share Posted January 6, 2014 Ok booted into safe mode and tested several moves. No change in schedule. Booted with webgui plugin installed and problem returns although I am unable to ascertain if the gui is just not parsing the params properly or if its actually adjusting the schedule. Looks more like its the former. So the next question is how does the community help fix/upgrade the webui plugin? or are we even allowed? As Unraid is really good many of us just want to contribute Regards Loophole Quote Link to comment
scumball Posted March 28, 2014 Share Posted March 28, 2014 Getting this issue also on v5.0.5 Quote Link to comment
Loophole Posted March 28, 2014 Author Share Posted March 28, 2014 Getting this issue also on v5.0.5 This seems to be fixed in the current webgui version. Am also running 5.05 and just manually started the mover with no issue. Regards Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.