UnRAID Pro 5.04

 

A few weeks ago I added a 4 Drive eSATA enclosure with Port Multiplier (Rosewell RSV-S4-X) to my UnRAID Pro system and everything had been working with no issues, at least as far as I could tell.  I was able to add the drives format them, extend the Array (drives 19-22) and add those drives to shares.  No indication that anything was off or weird.

 

I had to shut down the Main server earlier today, and upon powering back up the Server was not coming up (was booting, but no WebGUI)

 

The server is starting, I can log in via Telnet and get s SysLog (attached), and am seeing a bunch of the following errors.

 

Dec 19 15:01:58 media kernel: ata11.05: hard resetting link

Dec 19 15:02:02 media kernel: ata11.15: qc timeout (cmd 0xe4)

Dec 19 15:02:02 media kernel: ata11.05: failed to read SCR 0 (Emask=0x5)

Dec 19 15:02:02 media kernel: ata11.05: failed to read SCR 0 (Emask=0x40)

Dec 19 15:02:02 media kernel: ata11.05: failed to read SCR 1 (Emask=0x40)

Dec 19 15:02:02 media kernel: ata11.05: failed to read SCR 0 (Emask=0x40)

Dec 19 15:02:02 media kernel: ata11.05: link online but device misclassified

 

I guess I'd like to figure out if there is a way to get it up and working long enough to see if any data got stuck on these drives and then just remove the entire 4Drive enclosure array from my Server.  If I Can't get the drives back up, and am OK with just losing whatever data was on there, how do I go about changing the config of the rest of my UnRaid if I can't ever get into a GUI?

 

Any thoughts?  I've tried a couple different eSATA cables with no change.

 

Thanks in Advance!

Wade

syslog.txt

Solved sorta by myself....

 

Removed the eSATA enclosure... And did the "New Config" in the GUI (which booted just fine when the eSATA was removed), reassigned all the drives to their original position (took a screenshot of the GUI last time I added drives) and it's now doing a Parity Sync with the original 18 Drives (which I guess should be fine!)

 

Plugged the drives into a Windows 8 System looked at the drives with YAReG and there is no Data on any of those 4 drives that I need to move over, so all is right with the world again!

 

Wade