bonienl Posted January 2, 2014 Author Share Posted January 2, 2014 I just tried to spin up all drives using the gui, immediatly the gui has stopped responding... is this a known issue? Allow emhttp to finish the process of spinning up (or spinning down) the drives. The GUI is waiting for emhttp to return control. Perhaps you have a couple of slow drives ? Link to comment
jowi Posted January 2, 2014 Share Posted January 2, 2014 Drives are all equal, but it took a few minutes for the gui to respond. A lot slower than usual. Normal is 10 to 20 seconds. Will try some more. Link to comment
bonienl Posted January 2, 2014 Author Share Posted January 2, 2014 Drives are all equal, but it took a few minutes for the gui to respond. A lot slower than usual. Normal is 10 to 20 seconds. Will try some more. There is no difference in the command issued by the stock GUI and the Dynamix webGUI, both do the same <input type="submit" name="cmdSpinUpAll" value="Spin Up"> The line above transfers control to emhttp, and only when emhttp finishes the GUI can continue ... A test you can do: change the settings for Real-time page updates to disabled, see settings -> user preferences -> display settings. See if that makes any difference. Link to comment
jowi Posted January 2, 2014 Share Posted January 2, 2014 Maybe a coincedance then? Or stats or temp or other plugins that might interfere? Link to comment
bonienl Posted January 2, 2014 Author Share Posted January 2, 2014 See my suggestion above ... Link to comment
jowi Posted January 3, 2014 Share Posted January 3, 2014 I've had it set to passive from the beginning. Tested it some more, looks to be working ok now. Found another thing, on the ipad and mac using Safari the legenda on the stats page is empty, no filling or color (the total usage bar, the squares for below%, above% etc). On the mac using chrome they are ok. Link to comment
bonienl Posted January 3, 2014 Author Share Posted January 3, 2014 Found another thing, on the ipad and mac using Safari the legenda on the stats page is empty, no filling or color (the total usage bar, the squares for below%, above% etc). On the mac using chrome they are ok. Looks like the css code for the shaded colors isn't supported. I'll look into a fix. Thanks for testing. Link to comment
bonienl Posted January 3, 2014 Author Share Posted January 3, 2014 Updated version 2.0.5 available, see OT. Link to comment
Zonediver Posted January 3, 2014 Share Posted January 3, 2014 Smal Bug on iOS 5.1.1 (Safari): All Colors above the "Disk Usage" Graphs are Grey On Firefox (PC), Colors are ok Maybe a Java-issue Link to comment
bonienl Posted January 3, 2014 Author Share Posted January 3, 2014 Safari is a wild animal Link to comment
garion Posted January 3, 2014 Share Posted January 3, 2014 Updated version 2.0.5 available, see OT. 2.0.5 rocks The shaded colors in ios safari were a radom problem. After refresh several times sometimes it was working. Now with 2.0.5 width works in all tabs, background colors works in all test I have done. I dont find any color problem with safari ios 7.0.4 in a ipad air or a ipad 3. Link to comment
bonienl Posted January 3, 2014 Author Share Posted January 3, 2014 If you are using System Stats, don't forget to upgrade this plugin as well to make use of the dynamic width adaptation. Link to comment
jowi Posted January 3, 2014 Share Posted January 3, 2014 Updated version 2.0.5 available, see OT. Nice, but github still shows 2.0.4 and there is no link to 2.0.5. Link to comment
Zonediver Posted January 3, 2014 Share Posted January 3, 2014 Allready done - the Screen on my iPad 1 is now correct Link to comment
bonienl Posted January 3, 2014 Author Share Posted January 3, 2014 Updated version 2.0.5 available, see OT. Nice, but github still shows 2.0.4 and there is no link to 2.0.5. I recommend you use the dynamix plugin control add-on, it will make upgrading a breeze and you are always up to date. Github will get updated at some point ... Link to comment
jowi Posted January 3, 2014 Share Posted January 3, 2014 Ok, used the plugin control, it said 'installing' for a split second, and now the status bar is still showing 2.0.4? Do i need to reboot, clear cache? Link to comment
bonienl Posted January 3, 2014 Author Share Posted January 3, 2014 Ok, used the plugin control, it said 'installing' for a split second, and now the status bar is still showing 2.0.4? Do i need to reboot, clear cache? Just click one of the headers to have the page refreshed ... Ps. I have updated the installation to do this page "refresh" automatically for you ! Link to comment
jowi Posted January 3, 2014 Share Posted January 3, 2014 Rebooted, now i have the stock gui And telnet is telling me continuously 'Could not open input file plugins/webGui/include/Notify.php' WTF? Link to comment
bonienl Posted January 3, 2014 Author Share Posted January 3, 2014 Rebooted, now i have the stock gui And telnet is telling me continuously 'Could not open input file plugins/webGui/include/Notify.php' WTF? Can you do ls -l /boot/plugins And post the result. Btw as said before, rebooting is not necessary. Any of the plugins can be updated without a reboot. Link to comment
jowi Posted January 3, 2014 Share Posted January 3, 2014 I've removed ALL dynamix stuff from plugin and boot/plugin etc, rebooted, now it is still telling me Could not open input file plugins/webGui/include/Notify.php' .... Link to comment
bonienl Posted January 3, 2014 Author Share Posted January 3, 2014 I've removed ALL dynamix stuff from plugin and boot/plugin etc, rebooted, now it is still telling me Could not open input file plugins/webGui/include/Notify.php' .... See my instructions above ... Link to comment
jowi Posted January 3, 2014 Share Posted January 3, 2014 I'm sorry but i'm trying to get back to stock gui now first, but to no avail. Link to comment
Recommended Posts