Juzzotec Posted April 24, 2014 Share Posted April 24, 2014 A little tutorial needed... Im using the last version of simple features 1.0.11 and updated to 5.0.5 finally. Can I ask how to safely upgrade to Dynamix without losing my plugins, especially mysql which hosts my "mysql xbmc database". 1) Do I just remove simple features from /boot/plugins and just follow this tutorial? 2) How do I restore my current plugins used etc? Using Airvideo, Plex, plex updater, mysql, transmission. Thanks Link to comment
DaleWilliams Posted April 24, 2014 Share Posted April 24, 2014 A little tutorial needed... Im using the last version of simple features 1.0.11 and updated to 5.0.5 finally. Can I ask how to safely upgrade to Dynamix without losing my plugins, especially mysql which hosts my "mysql xbmc database". 1) Do I just remove simple features from /boot/plugins and just follow this tutorial? 2) How do I restore my current plugins used etc? Using Airvideo, Plex, plex updater, mysql, transmission. Thanks See here: http://lime-technology.com/forum/index.php?topic=28927.msg279478#msg279478 Simple Features COMPLETE Uninstall Then install Dynamix. There's a page of plugins fully supported by Dynamix builtin to the interface. You can add "CONTROL PANEL IKOSA" PlugIn Manager for an added page of 'managed' plug-ins for more capabilities. My "Control Panel" currently shows available AirVideo, Transmission, and two flavors of mySQL. Plex and Plex Updater are installed like normal (and then show up nicely in Dynamix). I always recommend backing up your flash to your PC frequently as you go along. That's a lot of changes and you may want to back up a step or two if something glitches. Also, take a SCREENSHOT of your current drive assignments showing DRIVE SERIAL NUMBERS (as shown on the WebGUI page.) IN particular, if something goes wrong, you want to be positive you know which drive is CACHE and which is PARITY....all others are data. Link to comment
Falc410 Posted May 3, 2014 Share Posted May 3, 2014 How is the dynamix plugin sending out the mails? unraid doesn't come with sendmail or mail command and I want to email the output of a backup script. Is there any way to use dynamix mail daemon instead of installing another one? Link to comment
trurl Posted May 3, 2014 Share Posted May 3, 2014 How is the dynamix plugin sending out the mails? unraid doesn't come with sendmail or mail command and I want to email the output of a backup script. Is there any way to use dynamix mail daemon instead of installing another one? Yes, the one installed by Dynamix should work for you. That is how I got emails from my rsync script. Link to comment
Falc410 Posted May 3, 2014 Share Posted May 3, 2014 And how do you use it from the command line? mail is not found, neither is sendmail. Link to comment
trurl Posted May 3, 2014 Share Posted May 3, 2014 And how do you use it from the command line? mail is not found, neither is sendmail. excerpt from the script I mentioned: echo -e "Subject: ### $(basename \"$0\") ###\n\nrsync finished successfully" | ssmtp -d root Something similar should work for you. I am not using Dynamix now because I am on unRAID 6 but it worked for me when I was using Dynamix. Link to comment
garion Posted May 12, 2014 Share Posted May 12, 2014 Server 62 days uptime. Dynamix and 5.0.5. Still no problems. S3, Notifications, Temps, Dashboard, UPS, Cache dir, all running fine. Some news. After 90 days and 17 hours uptime dynamix webgui freeze. Server is still up and running but no access via web. Shares works. Edit: console powerdown didnt work, reboot neither so I use the hard button so there is no log in flash about the issue, only old logs. Link to comment
Veilus Posted May 16, 2014 Share Posted May 16, 2014 I just noticed in the screenshot it says 5.0.5, where as mine only mentions 5.0 and not 5.0.4. How would i fix this? Link to comment
trurl Posted May 16, 2014 Share Posted May 16, 2014 I just noticed in the screenshot it says 5.0.5, where as mine only mentions 5.0 and not 5.0.4. How would i fix this? Upgrade to unRAID 5.0.5 Link to comment
sureguy Posted May 16, 2014 Share Posted May 16, 2014 I just noticed in the screenshot it says 5.0.5, where as mine only mentions 5.0 and not 5.0.4. How would i fix this? From your previous posts it looks like you're possibly running esxi, did you update your vmdk (assuming you're booting via that method), or just your USB drive? The vmdk has to be updated as that's what's booting unraid. Sent from a mobile device, sorry for any typos. Link to comment
Veilus Posted May 17, 2014 Share Posted May 17, 2014 I just noticed in the screenshot it says 5.0.5, where as mine only mentions 5.0 and not 5.0.4. How would i fix this? From your previous posts it looks like you're possibly running esxi, did you update your vmdk (assuming you're booting via that method), or just your USB drive? The vmdk has to be updated as that's what's booting unraid. Sent from a mobile device, sorry for any typos. Thanks, i had completely forgotten about that. Will make sure to update it. Link to comment
phenomeus Posted May 25, 2014 Share Posted May 25, 2014 @bonienl - i get an kernel panic with dynamix and unraid 5.0.5 on this hardware. the server is clean, rams are definitely allright and i just installed openssh. but if i start to use the core of dynamix i get a panic while doing a parity check or just idling. Board: MSI MS-7235 http://www.msi.com/product/mb/P965_Neo.html Chipset: Intel® P965+ICH8 HDDs connected to: 4x Intel® ICH8 Chipset not the 1x JMicron JMB361 BIOS: latest possible Bios 1.11 with optimized Settings loaded http://www.msi.com/product/mb/P965_Neo.html#/?div=BIOS CPU: Intel C2D 6600 RAM-test time: 3 rounds for 2x2GB DDR2 800, about 5-6h i already started a thread with logs and screenshots (maybe you can also have a look there) http://lime-technology.com/forum/index.php?topic=32899.0 hope you can help, thanks in advance Link to comment
doorunrun Posted May 25, 2014 Share Posted May 25, 2014 @bonienl - i get an kernel panic with dynamix and unraid 5.0.5 on this hardware. the server is clean, rams are definitely allright and i just installed openssh. but if i start to use the core of dynamix i get a panic while doing a parity check or just idling. hope you can help, thanks in advance Hello, I saw your other thread and while I don't use Dynamix something caught my eye in your hardware list. It's the "optimized Settings loaded" phrase. unRAID usually does better when the settings are set to "default." Do you know what they are optimized for? Windows performance? Gaming? You might want to try default BIOS settings. I should go back and look at your log. Good luck with the fix!! Link to comment
hgelpke Posted May 25, 2014 Share Posted May 25, 2014 Hello, I am currently using simpleFeatures with the web server enabled and ownCloud on top of that (unRAID 5.0.3). With the recent heartbleed attack having so much attention, I'd like to update my OpenSSL on the box to 1.0.1.g+ where the issue is fixed and switch to Dynamix as well. It looks I can simply delete a couple directories (after backing them up of course) to rid of simpleFeatures then install Dynamix. Any idea how I can modify the Dynamix install to use the latest OpenSSL not vunerable to heartbleed? Update: I did the following: [*]Deleted simpleFeatures from the box [*]Added Dynamix to the box [*]Pointed to my already existing ownCloud www root [*]Enabled SSL only the dynamix.lighttpd.cfg, pointed at my certs, etc. This left me non-vunerable to Heartbleed as I'm now using OpenSSL 0.9.8.x. I'd still like to update the OpenSSL libs to 1.0.1g but don't fully understand the .plg black magic for picking Slackware packages (They do have a 1.0.1g in slackware-current) Can you provide more info on how you enabled SSL in lighttp? I can't get it to work with Owncloud and you seem to have gotten past that part. Link to comment
Kx2000 Posted May 26, 2014 Share Posted May 26, 2014 Is there a plugin for unraid 6 ? Thanks. Link to comment
Frank1940 Posted May 26, 2014 Share Posted May 26, 2014 Is there a plugin for unraid 6 ? Thanks. See this post: http://lime-technology.com/forum/index.php?topic=30939.msg302412#msg302412 Link to comment
Kx2000 Posted May 27, 2014 Share Posted May 27, 2014 Thanks, I will try it But i have ever test the 2.2.3 version and it does'nt work... Is it possible that older version can run ? Link to comment
Frank1940 Posted May 27, 2014 Share Posted May 27, 2014 Thanks, I will try it But i have ever test the 2.2.3 version and it does'nt work... Is it possible that older version can run ? You are posting in the wrong thread. Post in the thread for the version 6 Dynamix... Link to comment
Kx2000 Posted May 27, 2014 Share Posted May 27, 2014 Rectified... and it seems there is no solutions for now on Unraid 6b5 Link to comment
bonienl Posted May 29, 2014 Author Share Posted May 29, 2014 New version 2.2.4 available. See opening topic to view the changes. People who have installed plugin control can update through the GUI. Remember: this is for unRAID v5 only Link to comment
megalodon Posted June 10, 2014 Share Posted June 10, 2014 So I have installed Dynamix and I get an error when loading up which reads: Could not open input file: plugins/WebGui/template.php It may be because I'm using unraid 5.05 and it says only unraid V5, does that mean version 5.0 only? Link to comment
DaleWilliams Posted June 10, 2014 Share Posted June 10, 2014 Dynamix works fine in 5.0.5. it does Not work, yet, in the v.6 betas. It sounds like an incomplete install or corrupt flash drive. I'd try putting the flash in a PC and running Chkdsk on it. (Disk Utility on a Mac). Link to comment
EMKO Posted June 10, 2014 Share Posted June 10, 2014 does cache read speed get graphed in Dynamix stats page? i see the writes get graphed but not the reads is that normal? Link to comment
Conson Droppa Posted June 10, 2014 Share Posted June 10, 2014 So I have installed Dynamix and I get an error when loading up which reads: Could not open input file: plugins/WebGui/template.php It may be because I'm using unraid 5.05 and it sats only unraid V5, does that mean version 5.0 only? I was having trouble also. Once I removed simple features and unMenu it's been up for 173 days. Not saying they are the culprit but I wasn't lasting 18 hours before. If I had to guess it was SF and 5.0.5. Currently running 5.0.5 - dynamix full addons - plex "Only thing I hate about unRaid, it works so well I forget about it." Sent from my iPhone using Tapatalk Link to comment
trurl Posted June 10, 2014 Share Posted June 10, 2014 So I have installed Dynamix and I get an error when loading up which reads: Could not open input file: plugins/WebGui/template.php It may be because I'm using unraid 5.05 and it sats only unraid V5, does that mean version 5.0 only? I was having trouble also. Once I removed simple features and unMenu it's been up for 173 days. Not saying they are the culprit but I wasn't lasting 18 hours before. If I had to guess it was SF and 5.0.5. Currently running 5.0.5 - dynamix full addons - plex "Only thing I hate about unRaid, it works so well I forget about it." Sent from my iPhone using Tapatalk Since Dynamix is intended to replace SimpleFeatures, you should definitely not have SimpleFeatures and Dynamix both installed. In fact, SimpleFeatures is no longer compatible with unRAID 5 so should not be installed in any case. It is unlikely that unMenu has anything to do with it since it is completely independent of the webGUI and I have never heard of it breaking anything. Judging from megalodon's error it may have something to do with Limetech's enhanced webGUI. It should also not be used with Dynamix. megalodon, post a complete syslog. Link to comment
Recommended Posts