Dynamix - Web GUI


Recommended Posts

Ok, that worked.  I even installed the system temp plugin, and I can see where the temps would be displayed. However, it's not showing any temps.  Do I need to configure or install anything else to get the temps to show up?

 

In the old SF gui, I had to create a sensor.conf files and have my GO file copy it over upon reboot.  SF temps worked just fine.  Perhaps I should put that back in my GO file and try to use my old sensors.conf?

 

I also noticed (and I don't think this is directly related to this plugin) on my console when installing Dynamix plugins;

 

Warning: cannot verify raw.githubusercontend.com's certificate, issed by bla..bla..bla..Unable to locally verify the issues's authority.

 

That said, the plugin installed.  Does anyone know what that error means and how to resolve it?  What is weird is that it's not in my Syslog.

Link to comment
  • Replies 1.3k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

May I ask one of you to scan my syslog to see if anything pops out at you. My array is running great but the GUI has suspended again. I was able to access it up 6/19/14 I know for sure. I don't see anything different between the days before or after. I don't really know enough to know otherwise. I'm not even sure if anything would report to the log pertaining to this. I guess this may just be one of those issues where we cross our fingers that 5.0.6 clears it up?

 

Thanks!

 

5.0.5

Dynamix

Plex

APC

 

Trurl  = Let me know if I should put this in Gen Support!

syslog.txt.zip

Link to comment

May I ask one of you to scan my syslog to see if anything pops out at you. My array is running great but the GUI has suspended again. I was able to access it up 6/19/14 I know for sure. I don't see anything different between the days before or after. I don't really know enough to know otherwise. I'm not even sure if anything would report to the log pertaining to this. I guess this may just be one of those issues where we cross our fingers that 5.0.6 clears it up?

 

Thanks!

 

5.0.5

Dynamix

Plex

APC

 

Trurl  = Let me know if I should put this in Gen Support!

What do you get with

ps aux | grep emhttp

Link to comment

I appologize, I needed my GUI so I rebooted. but I did run it and this is the results:

 

Linux 3.9.11p-unRAID.
root@unRaid:~# ps aux | grep emhttp
root     13508  0.1  0.0   5700  1448 ?        Sl   07:16   0:02 /usr/local/sbin/emhttp
root     22732  0.0  0.0   2452   584 pts/0    S+   07:55   0:00 grep emhttp
root@unRaid:~# 

Link to comment

This interface is by far the best I've seen. Not only are the real time stats cool, but the other "geeky" information is so cool too. Brings another dimension to my purchase. This should be standard with all downloads of unRAID.

 

Thank you.

Link to comment

I can confirm that this gui is working great for my setup and is much better than the half-baked stock gui in v5.  Very nice to have my cpu and mb temps displayed again and I just finished configuring the email notify - again, very nice to have that back. I had SF before and really like it.  I'm off to play with the other plugins for this gui next. 

 

Very nice job and many thanks!

Link to comment
  • 2 weeks later...

Today after having a read error on a disk  I saw that it has pending sectors, in dashboard view the s.m.a.r.t. status appears OK, I would like that if a disk has single pending sector it would be reported as not OK, any way to change the s.m.a.r.t. thresholds?

 

Thanks

 

2IWG2Bg.jpg

Lg7NqDo.jpg

Link to comment

i got a little request here, might not be possible.

 

can u make a little warning button to tell user if their usb flash disk(that store unraid) is needed to do disk scan?

 

i had a situation wher i could not access webgui after i woke unraid up from s3. at first i thought it was all the plugins that crashed my server. i then telnet, did a clean shutdown. powered back up, parity check  :o removed all plugins then rebooted.

i thought it will b fine but on the next day after i woke it up from s3, i could not access webgui. i then checked syslog thru telnet and found out that it is the flash disk errors

 

Link to comment

I have a little request here. I always wanted to see the status (Export as SMF,NFS, AFP, Security, user,...) of a share on the Shares overview page; without having to select each folder and check. Especially now, with the individual tabs for SMB, AFP there is more clicking involved just to check the status of a share.

 

Edited: Note to myself: there is a limited version of such an overview on the Dashboard. (still would be great if such info was also available on the Shares page )

Link to comment

Looking to see if anyone else is having the same issue.

 

I'm running 5.0.4 with dynamix.  Under the web server settings I have all 3 logs disabled.  (PHP Error, Error, Access)

 

Yet PHP Error continues to show up and grow like crazy.  (I'm not so worried about the errors inside PHP, I'm more concerned that the file is showing up when I have it selected as disabled.  I've rebooted server and selected enable and back to disable and the errors continue to show.

 

Any ideas?

Link to comment

I've read through large swaths of this thread in the past, but have not caught up from where I left off.

 

I'm running 5.0.4 with 2.2.4 & hit "Stop Array". After doing so, all Dynamix pages are reporting 404, and I can't connect to the server via puTTY. I have a monitor/keyboard connected to the box, and I can log in there.

 

I need to shut down the box to add a new drive - what's my best next step from here?

 

Thanks!

FreeMan

 

Edit: Dynamix is still running, I just got my status email, so it appears just the GUI has died. can I restart emhttp or something like that? If so, how?

ps -ef  shows that /usr/local/sbin/emhttp is still running

 

Edit again: perused back through the thread and found the reference to the powerdown script - used that to shut the box down.

Link to comment

OK, another, admittedly minor, issue.

 

I'm preclearing a disk using JoeL's script. It reports 92% complete at 88.1 MB/s, but Dynamix's Main | Unassigned Devices is reporting it as 92% 50 MB/s. That's a fairly significant difference in speed being reported.

 

I'm inclined to believe the script is more accurate, but am open to being shown otherwise. Does Dynamix calculate the speed based on drive size & time? Does it scrape it from a file somewhere that preclear_disk.sh drops somewhere?

 

Again, not a big issue, but one I've noticed before when running unMenu, so there's something going on.

Dynamix_Pre-Clear_speed.PNG.8c794d509b13d3409d53fc3af69e24a9.PNG

Link to comment

For some reason I cannot load the webgui.  The server is rebuilding a drive, as I just replaced one.  I can access my shares, and I can see the drive light flashing, so I expect the rebuild is working fine.  Also CP, SB, and NZB are all reachable and working fine.

 

How can I get the webgui to load?  Is there a command to make it restart?

 

can I just type the same command that is in my GO file?

/usr/local/sbin/emhttp &

 

Update:  I issued the above command with no luck.  I still cannot get to the web gui.  Please help

 

Ok from what I read, there is no way to fix this, other than a reboot.  I also looked at the syslog and see that the rebuild did not begin, so I just issued the powerdown command.  After reboot, gui is working again and the rebuild process kicked off on it's own - array started, so I guess life is good again.

Link to comment

I run Dynamix on my 5.04 server. At first everything seemed ok and work just fine. I then installed several plugins: active streams, cache dirs., disk health, system info, system stats and system temp. Again everything seems to work. Only temps are not shown, just --.

 

Also SMART reports appear a little sluggish. I have now cache dirs. enabled and the system is running a parity check.

 

After some toying with disk health, checking smart status of severals disks I wanted to check system stats and the server became totally unresponsive and I lost the web gui.

 

Am I taxing it too much? How can I see what is going on and what the status is of the parity check that is running?

Link to comment

For some reason I cannot load the webgui.  The server is rebuilding a drive, as I just replaced one.  I can access my shares, and I can see the drive light flashing, so I expect the rebuild is working fine.  Also CP, SB, and NZB are all reachable and working fine.

 

How can I get the webgui to load?  Is there a command to make it restart?

 

can I just type the same command that is in my GO file?

/usr/local/sbin/emhttp &

 

Update:  I issued the above command with no luck.  I still cannot get to the web gui.  Please help

 

Ok from what I read, there is no way to fix this, other than a reboot.  I also looked at the syslog and see that the rebuild did not begin, so I just issued the powerdown command.  After reboot, gui is working again and the rebuild process kicked off on it's own - array started, so I guess life is good again.

I am NOT the expert or final authority, but your post got me thinking... if you kill the emhttp process first, then try restarting it, that may work to get the gui to respond again.

 

Can someone with more knowledge chime in? I'd had issues with unresponsive/hung web interface before, and would love to know if there is an easier way to kick start it than a reboot.

Link to comment

I am NOT the expert or final authority, but your post got me thinking... if you kill the emhttp process first, then try restarting it, that may work to get the gui to respond again.

The v5 emhttp process is not restartable, so this approach will not work.

Link to comment

Most likely what is happening is something that has always plagued 32bit unRAID. Processes getting killed because of lack of memory. Happens with emhttp, with or without Dynamix. Could also happen to unMenu I think, since it is an awk script running in the background. Unlike emhttp, unMenu could be restarted without a reboot by killing awk then running uu again.

Link to comment
  • Squid locked this topic
Guest
This topic is now closed to further replies.