casperse Posted February 7, 2019 Share Posted February 7, 2019 @Maor detect button just keeps writing "coretemp jc42" and shows no sencores in the dropdown menu Changing the name to "jc42" worked for a second I could select sensors but hitting the Apply button made them all disappear again? Same thing the first time I did a detect and then all gone? Could be a small bug, beacuse everything was detected perfectly and then hitting Aply and it was gone Quote Link to comment
Maor Posted February 7, 2019 Share Posted February 7, 2019 I am total noob, but for me, I had to modprobe it87 the driver before it worked(after every boot). You can anyways run a user script and get the reading without the plugin Quote Link to comment
casperse Posted February 8, 2019 Share Posted February 8, 2019 (edited) I would really like to see if I cant get the plugin to work (Havent given up yet!) Looking into the conf. files I do have the following: /config/plugins/dynamix.system.temp/drivers.conf coretemp jc42 Also just tried: jc42 /config/plugins/dynamix.system.temp/sensors.conf # sensors chip "jc42-i2c-0-18" label "temp1" "CPU Temp" But I don't see any core temps anywhere? Also the dropdown fields are empty again? Does it hide information somewhere? Because deleting the plugin and installing it again keeps the dropdowns empty Only at the first install and me renaming the sensor from "coretemp jc42" to "jc42" I got the dropdown populated with all the sensors! Haven't been able to get them back since? sensors-detect Driver `jc42': * Bus `SMBus I801 adapter at efa0' Busdriver `i2c_i801', I2C address 0x18 Chip `IDT TSE2004' (confidence: 5) * Bus `SMBus I801 adapter at efa0' Busdriver `i2c_i801', I2C address 0x1a Chip `IDT TSE2004' (confidence: 5) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) Edited February 8, 2019 by casperse Quote Link to comment
casperse Posted February 11, 2019 Share Posted February 11, 2019 @bonienl Hi I have tried to create a small video to show you what happens. To me it looks like the plugin is working perfectly until I press the apply button? Then everything is gone and I cant get the temp sensors back again? Please let me know if you need any log files to investigate this Unraid temp.mp4 Quote Link to comment
Maor Posted February 11, 2019 Share Posted February 11, 2019 (edited) This is for the new 6.7 RCx so ....... Edited February 12, 2019 by Maor Quote Link to comment
trurl Posted February 11, 2019 Share Posted February 11, 2019 5 minutes ago, Maor said: This is for the new 6.7 RCx so make a bug report in the proper section of the forum, if you can not find any related to this already. Problems with plugins should not be in a bug report for Unraid but should be dealt with in the proper plugin thread. One of the things that is often requested when you suspect an issue with a new Unraid release is to run in SAFE mode to eliminate possible effects of plugins. So obviously plugins aren't considered something to be handled with a bug report. If a plugin has a bug then it should be reported in the plugin thread. Quote Link to comment
trurl Posted February 11, 2019 Share Posted February 11, 2019 You should post your diagnostics so we can take a look and make sure there isn't an issue with your flash drive preventing your settings from being saved. Quote Link to comment
casperse Posted February 11, 2019 Share Posted February 11, 2019 1 hour ago, trurl said: You should post your diagnostics so we can take a look and make sure there isn't an issue with your flash drive preventing your settings from being saved. Hi @trurl thanks I did try this on the official stable release and I could see the same behaviour? The usb is working fine every other plugin I have installed also works perfectly... tower-diagnostics-20190211-1802.zip This is a brand new UnRAID build and I would love to see how hot it is running Everyone's help is as always much appreciated Quote Link to comment
trurl Posted February 11, 2019 Share Posted February 11, 2019 Looks like you are running the NVidia plugin. This installs a custom version of Unraid. Probably not causing this issue though. Have you tried another browser? Quote Link to comment
casperse Posted February 11, 2019 Share Posted February 11, 2019 5 minutes ago, trurl said: Looks like you are running the NVidia plugin. This installs a custom version of Unraid. Probably not causing this issue though. Have you tried another browser? Yes IE, Firefox & Chrome same thing. ( The NVidia plugin was first installed today and not activated yet, the Temp problem have been there from the very beginning secound plugin I installed after UAD Quote Link to comment
trurl Posted February 11, 2019 Share Posted February 11, 2019 I've run out of ideas. I will tag @bonienl to see if he has any. Probably he reads the thread but hasn't posted to it in a very long time. Quote Link to comment
bonienl Posted February 12, 2019 Author Share Posted February 12, 2019 On my system it works as expected and I can't reproduce the issue as shown in your video. At the moment you press Apply, it will write the new settings to the flash device. Perhaps some corruption on your flash device? Shutdown your system and take the USB out, let it error check on a Windows machine. See if this helps. Quote Link to comment
casperse Posted February 12, 2019 Share Posted February 12, 2019 8 hours ago, bonienl said: On my system it works as expected and I can't reproduce the issue as shown in your video. At the moment you press Apply, it will write the new settings to the flash device. Perhaps some corruption on your flash device? Shutdown your system and take the USB out, let it error check on a Windows machine. See if this helps. The USB is fine and the conf files is also written: sensors.conf # sensors chip "coretemp-isa-0000" label "temp1" "CPU Temp" chip "jc42-i2c-0-1a" label "temp1" "MB Temp" And drivers.conf jc42 I am just not seeing any temperatures (Only at selection of the probes) Can it be the MB or the chipset? - It's a new MB for the Xeon E-2100G CPU's Gigabyte C246-WU4 Quote Link to comment
clowrym Posted February 12, 2019 Share Posted February 12, 2019 Tried manually running the sensors command and seeing what error it returns. I get the following: Error: File /etc/sensors.d/sensors.conf, line 2: Undeclared bus id referenced Error: File /etc/sensors.d/sensors.conf, line 4: Undeclared bus id referenced Error: File /etc/sensors.d/sensors.conf, line 14: Undeclared bus id referenced Error: File /etc/sensors.d/sensors.conf, line 16: Undeclared bus id referenced sensors_init: Can't parse bus name I removed the sensors.comf files and I can then reload the drivers and I can select the Temps I want to see, but as soon as I hit apply, The sensors drop down goes blank again & I get the same error as above if I run the command manually.... Quote Link to comment
thestip Posted February 12, 2019 Share Posted February 12, 2019 I had the same problem, ended up deleting the sensors.conf from BOTH /etc/sensors.d/ AND /boot/config/plugins/dynamix.system.temp/. Then, I uninstalled the plugin and re-installed it. That fixed it, for me at least. Quote Link to comment
clowrym Posted February 12, 2019 Share Posted February 12, 2019 1 hour ago, thestip said: I had the same problem, ended up deleting the sensors.conf from BOTH /etc/sensors.d/ AND /boot/config/plugins/dynamix.system.temp/. Then, I uninstalled the plugin and re-installed it. That fixed it, for me at least. I tried deleting both & reinstalling...but ended up still having the same issue Quote Link to comment
casperse Posted February 13, 2019 Share Posted February 13, 2019 15 hours ago, clowrym said: I tried deleting both & reinstalling...but ended up still having the same issue Same here had to try it Delete: root/etc/sensors.d/ this folder was empty? - could that be the problem? root/flash/config/plugins/dynamix.system.temp/*.* Uninstall and reinstall but this time I couldn't even get the initial list of sensors? Quote Link to comment
casperse Posted February 17, 2019 Share Posted February 17, 2019 (edited) @clowrym I just tried again on the Rc4 and it works now! Edited February 17, 2019 by casperse Quote Link to comment
clowrym Posted February 18, 2019 Share Posted February 18, 2019 didn't work for me.....no sensors to select Quote Link to comment
casperse Posted February 18, 2019 Share Posted February 18, 2019 5 hours ago, clowrym said: didn't work for me.....no sensors to select I don't know if this makes any difference but I started with a rollback to v.6.6.6 stable and then to RC4? Quote Link to comment
clowrym Posted February 18, 2019 Share Posted February 18, 2019 I dont imagine it will make much of a difference, this is an issue I've had since the plugin came out!! Quote Link to comment
avp2306 Posted February 19, 2019 Share Posted February 19, 2019 Thanks for creating this plug-in. Its working on my X58 / 6 core Xeon build. I'm able to select 1 of 6 cores as my Processor Temperature field - is there any way to display highest temp per processor instead of individual cores? Quote Link to comment
p0xus Posted June 6, 2019 Share Posted June 6, 2019 (edited) Im having the same problem as some others on this forum. I have a Supermicro X10DAL-i with dual Xeon E5-2678s and when I say detect drivers, it says "coretemp nct7904", but there are no sensors in the list. I think I remember seeing them right before I saved which sensor was which, but the lists have been blank ever since. I am new to UnRAID, but will do my best to send any diagnostic info you want. Ive tried reinstalling the plugin, but no difference. If not this plugin, is there any other way to see CPU temps in unraid? It concerns me greatly that I have no idea how hot they are. I havn't wanted to stress them without knowing. Edited June 6, 2019 by p0xus Quote Link to comment
SH4LT1S Posted June 29, 2019 Share Posted June 29, 2019 (edited) Hello, where can i see temperature? Its not displayed on main page? Edit: nvm, found it. so small... lol Edited June 29, 2019 by SH4LT1S found it Quote Link to comment
Spazhead Posted July 9, 2019 Share Posted July 9, 2019 Don't know if this helps anyone else, i have 2 dell R610, one reads the coretemp the second one did not. So i copied the sensor.conf file from working to non-working and rebooted now all is good. my sensor.conf # sensors chip "coretemp-isa-0000" label "temp3" "CPU Temp" chip "coretemp-isa-0001" label "temp11" "MB Temp" Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.