bmfrosty Posted February 1, 2014 Share Posted February 1, 2014 As per usual, a system log would be nice. Also, stop array, look at the device identifier on the Main page and run reiserfsck. Suppose device id is (sdc) type: reiserfsck /dev/sdc1 <- don't forget the '1' The syslogs may be tricky, as the hard lock seems to lock me out completely, and I expect that they get wiped with a reboot. Please correct me if I'm wrong. Here's the output from my fsck: root@maxi:/boot/logs# reiserfsck /dev/sdf1 reiserfsck 3.6.24 Will read-only check consistency of the filesystem on /dev/sdf1 Will put log info to 'stdout' Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes ########### reiserfsck --check started at Sat Feb 1 13:12:18 2014 ########### Replaying journal: Trans replayed: mountid 23, transid 3574365, desc 5736, len 1, commit 5738, next trans offset 5721 Trans replayed: mountid 23, transid 3574366, desc 5739, len 1, commit 5741, next trans offset 5724 Trans replayed: mountid 23, transid 3574367, desc 5742, len 66, commit 5809, next trans offset 5792 Trans replayed: mountid 23, transid 3574368, desc 5810, len 21, commit 5832, next trans offset 5815 Trans replayed: mountid 23, transid 3574369, desc 5833, len 20, commit 5854, next trans offset 5837 Trans replayed: mountid 23, transid 3574370, desc 5855, len 21, commit 5877, next trans offset 5860 Trans replayed: mountid 23, transid 3574371, desc 5878, len 17, commit 5896, next trans offset 5879 Trans replayed: mountid 23, transid 3574372, desc 5897, len 22, commit 5920, next trans offset 5903 Trans replayed: mountid 23, transid 3574373, desc 5921, len 22, commit 5944, next trans offset 5927 Trans replayed: mountid 23, transid 3574374, desc 5945, len 20, commit 5966, next trans offset 5949 Trans replayed: mountid 23, transid 3574375, desc 5967, len 21, commit 5989, next trans offset 5972 Trans replayed: mountid 23, transid 3574376, desc 5990, len 27, commit 6018, next trans offset 6001 Trans replayed: mountid 23, transid 3574377, desc 6019, len 24, commit 6044, next trans offset 6027 Trans replayed: mountid 23, transid 3574378, desc 6045, len 18, commit 6064, next trans offset 6047 Trans replayed: mountid 23, transid 3574379, desc 6065, len 19, commit 6085, next trans offset 6068 Trans replayed: mountid 23, transid 3574380, desc 6086, len 342, commit 6429, next trans offset 6412 Trans replayed: mountid 23, transid 3574381, desc 6430, len 44, commit 6475, next trans offset 6458 Trans replayed: mountid 23, transid 3574382, desc 6476, len 587, commit 7064, next trans offset 7047 Trans replayed: mountid 23, transid 3574383, desc 7065, len 790, commit 7856, next trans offset 7839 Trans replayed: mountid 23, transid 3574384, desc 7857, len 249, commit 8107, next trans offset 8090 Trans replayed: mountid 23, transid 3574385, desc 8108, len 27, commit 8136, next trans offset 8119 Trans replayed: mountid 23, transid 3574386, desc 8137, len 480, commit 426, next trans offset 409 Trans replayed: mountid 23, transid 3574387, desc 427, len 8, commit 436, next trans offset 419 Trans replayed: mountid 23, transid 3574388, desc 437, len 7, commit 445, next trans offset 428 Trans replayed: mountid 23, transid 3574389, desc 446, len 12, commit 459, next trans offset 442 Trans replayed: mountid 23, transid 3574390, desc 460, len 12, commit 473, next trans offset 456 Trans replayed: mountid 23, transid 3574391, desc 474, len 10, commit 485, next trans offset 468 Trans replayed: mountid 23, transid 3574392, desc 486, len 11, commit 498, next trans offset 481 Trans replayed: mountid 23, transid 3574393, desc 499, len 11, commit 511, next trans offset 494 Trans replayed: mountid 23, transid 3574394, desc 512, len 12, commit 525, next trans offset 508 Trans replayed: mountid 23, transid 3574395, desc 526, len 13, commit 540, next trans offset 523 Trans replayed: mountid 23, transid 3574396, desc 541, len 14, commit 556, next trans offset 539 Trans replayed: mountid 23, transid 3574397, desc 557, len 9, commit 567, next trans offset 550 Trans replayed: mountid 23, transid 3574398, desc 568, len 5, commit 574, next trans offset 557 Trans replayed: mountid 23, transid 3574399, desc 575, len 23, commit 599, next trans offset 582 Trans replayed: mountid 23, transid 3574400, desc 600, len 93, commit 694, next trans offset 677 Trans replayed: mountid 23, transid 3574401, desc 695, len 6, commit 702, next trans offset 685 Trans replayed: mountid 23, transid 3574402, desc 703, len 4, commit 708, next trans offset 691 Trans replayed: mountid 23, transid 3574403, desc 709, len 4, commit 714, next trans offset 697 Trans replayed: mountid 23, transid 3574404, desc 715, len 6, commit 722, next trans offset 705 Trans replayed: mountid 23, transid 3574405, desc 723, len 4, commit 728, next trans offset 711 Trans replayed: mountid 23, transid 3574406, desc 729, len 9, commit 739, next trans offset 722 Trans replayed: mountid 23, transid 3574407, desc 740, len 8, commit 749, next trans offset 732 Trans replayed: mountid 23, transid 3574408, desc 750, len 8, commit 759, next trans offset 742 Trans replayed: mountid 23, transid 3574409, desc 760, len 4, commit 765, next trans offset 748 Trans replayed: mountid 23, transid 3574410, desc 766, len 4, commit 771, next trans offset 754 Trans replayed: mountid 23, transid 3574411, desc 772, len 2, commit 775, next trans offset 758 Trans replayed: mountid 23, transid 3574412, desc 776, len 2, commit 779, next trans offset 762 Trans replayed: mountid 23, transid 3574413, desc 780, len 2, commit 783, next trans offset 766 Replaying journal: Done. Reiserfs journal '/dev/sdf1' in blocks [18..8211]: 49 transactions replayed Checking internal tree.. finished Comparing bitmaps..finished Checking Semantic tree: finished No corruptions found There are on the filesystem: Leaves 32709 Internal nodes 216 Directories 136247 Other files 139692 Data block pointers 10246515 (2356817 of them are zero) Safe links 0 ########### reiserfsck finished at Sat Feb 1 13:13:43 2014 ########### root@maxi:/boot/logs# It reads ok to me, but I don't know much about care and feeding of reiserfs. Any thoughts on it would be appreciated. I have spare cache drives, and I may just try and back up the current one to a new drive, and then bring the array up with it. Quote Link to comment
jumperalex Posted February 1, 2014 Share Posted February 1, 2014 1. That seems fair. i was just guessing that there will be situations where someone (not necessarily even me) might want to get at a VM GUI from outside. If there really isn't a use case for that, or if they are going to use a VPN anyway, then no harm no foul I guess. It's your party as they say. No no, I get it. I was more just curious. I'm sure you're right and I'll probably only interact with my VM via webguis provided by the service I'm running like Plex. 3. OK, makes total sense. But did I say something that made you say that? Really I ask that sincerely. I'm only talking about the img Tom provided which seems pretty minumal. I haven't loaded it. Is it just a command console or does it include a Linux Desktop (and all the apps that go with it)? It came with xfce. The apps seem pretty sparse, but I'm hardly a judge. 4. Does Tom's img not have PV drivers loaded? Slacket's Ubuntu VM Appliance has the PV Drivers loaded. Thanks 5. Now we get to it. Ok so yeah obviously I choose the password, and I can choose a good 8-char one. You imply TightVNC is the cause of the 8-char limit but I was notified of that limit when I invoked vncserver :1 in the VM console for the first time. How is that a TightVNC doing? From TightVNC's own website How secure is TightVNC? Although TightVNC encrypts VNC passwords sent over the net, the rest of the traffic is sent as is, unencrypted (for password encryption, VNC uses a DES-encrypted challenge-response scheme, where the password is limited by 8 characters, and the effective DES key length is 56 bits). So using TightVNC over the Internet can be a security risk. To solve this problem, we have plans to implement built-in encryption in future versions of TightVNC. In the mean time, if you need real security, we recommend installing an SSH server, and using SSH tunneling for all TightVNC connections from untrusted networks. That is great info. I think I get the gist now. Thanks. Quote Link to comment
bmfrosty Posted February 1, 2014 Share Posted February 1, 2014 Was able to recreate a crash. Looks like I'm crashing the sata driver maybe? Here's testvm.cfg: root@maxi:/mnt/cache/xen# cat testvm bootloader = "pygrub" memory = 2048 name = "testvm" vif = [ 'bridge=br0', ] disk = ['file:/mnt/cache/xen/ubuntu.13-04.xfce.x86-64.20130424.img,xvda,w'] root = "/dev/xvda" extra = "fastboot" root@maxi:/mnt/cache/xen# Here's the output of the console where I was running the VM: root@maxi:/mnt/user/xen# xl create testvm ; xl console testvm Parsing config from testvm Daemon running with PID 3159 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-19-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 (Ubuntu 3.8.0-19.29-generic 3.8. [ 0.000000] Command line: root=/dev/xvda console=hvc0 ro root=/dev/xvda fastboot [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] ACPI in unprivileged domain disabled [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x000000007fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x80000 max_arch_pfn = 0x400000000 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x7fffffff] [ 0.000000] RAMDISK: [mem 0x02345000-0x0300efff] [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fffffff] [ 0.000000] NODE_DATA [mem 0x7fffb000-0x7fffffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009ffff] [ 0.000000] node 0: [mem 0x00100000-0x7fffffff] [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] No local APIC present [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] e820: [mem 0x80000000-0xffffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.3.1 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s85056 r8192 d21440 u2097152 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515978 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/xvda console=hvc0 ro root=/dev/xvda fastboot [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 2026568k/2097152k available (7006k kernel code, 448k absent, 70136k reserved, 6238k data, 992k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16640 nr_irqs:256 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled [ 0.000000] allocated 8388608 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Detected 3600.074 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.14 BogoMIPS (lpj=14400296) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] Security Framework initialized [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Yama: becoming mindful. [ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys devices [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] Initializing cgroup subsys blkio [ 0.004000] Initializing cgroup subsys perf_event [ 0.004000] Initializing cgroup subsys hugetlb [ 0.004000] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.004000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.004000] tlb_flushall_shift: 5 [ 0.025107] Freeing SMP alternatives: 24k freed [ 0.026834] ftrace: allocating 26689 entries in 105 pages [ 0.032112] cpu 0 spinlock event irq 17 [ 0.032150] Performance Events: [ 0.032155] perf: AMD core performance counters detected [ 0.032162] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.032169] no hardware sampling interrupt available. [ 0.032191] Broken PMU hardware detected, using software events only. [ 0.032198] Failed to access perfctr msr (MSR c0010201 is 0) [ 0.033201] Brought up 1 CPUs [ 0.033271] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.033407] devtmpfs: initialized [ 0.034289] EVM: security.selinux [ 0.034299] EVM: security.SMACK64 [ 0.034305] EVM: security.capability [ 0.035341] Grant tables using version 2 layout. [ 0.035371] Grant table initialized [ 0.035447] regulator-dummy: no parameters [ 0.035513] NET: Registered protocol family 16 [ 0.036427] PCI: setting up Xen PCI frontend stub [ 0.037508] bio: create slab <bio-0> at 0 [ 0.037633] ACPI: Interpreter disabled. [ 0.037659] xen/balloon: Initialising balloon driver. [ 0.037659] xen-balloon: Initialising balloon driver. [ 0.037659] vgaarb: loaded [ 0.037659] SCSI subsystem initialized [ 0.037659] usbcore: registered new interface driver usbfs [ 0.037659] usbcore: registered new interface driver hub [ 0.037659] usbcore: registered new device driver usb [ 0.037659] PCI: System does not support PCI [ 0.037659] PCI: System does not support PCI [ 0.037659] NetLabel: Initializing [ 0.037659] NetLabel: domain hash size = 128 [ 0.037659] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.037659] NetLabel: unlabeled traffic allowed by default [ 0.037659] Switching to clocksource xen [ 0.045169] AppArmor: AppArmor Filesystem Enabled [ 0.045205] pnp: PnP ACPI: disabled [ 0.046591] NET: Registered protocol family 2 [ 0.046760] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.046867] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.046936] TCP: Hash tables configured (established 16384 bind 16384) [ 0.046979] TCP: reno registered [ 0.046996] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.047015] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.047080] NET: Registered protocol family 1 [ 0.047139] Trying to unpack rootfs image as initramfs... [ 0.062235] Freeing initrd memory: 13096k freed [ 0.066057] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.066253] Initialise module verification [ 0.066290] audit: initializing netlink socket (disabled) [ 0.066306] type=2000 audit(1391297019.309:1): initialized [ 0.087355] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.088931] VFS: Disk quotas dquot_6.5.2 [ 0.088979] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.089428] fuse init (API version 7.20) [ 0.188032] msgmni has been set to 3983 [ 0.188488] Key type asymmetric registered [ 0.188500] Asymmetric key parser 'x509' registered [ 0.188561] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.188608] io scheduler noop registered [ 0.188615] io scheduler deadline registered (default) [ 0.188629] io scheduler cfq registered [ 0.188712] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.188737] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.189770] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.190831] Linux agpgart interface v0.103 [ 0.192269] brd: module loaded [ 0.192986] loop: module loaded [ 0.196936] libphy: Fixed MDIO Bus: probed [ 0.197018] tun: Universal TUN/TAP device driver, 1.6 [ 0.197024] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 0.197093] PPP generic driver version 2.4.2 [ 0.197132] Initialising Xen virtual ethernet driver. [ 0.198162] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.198177] ehci-pci: EHCI PCI platform driver [ 0.198210] ehci-platform: EHCI generic platform driver [ 0.198227] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.198250] uhci_hcd: USB Universal Host Controller Interface driver [ 0.198318] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.206026] i8042: No controller found [ 1.206195] mousedev: PS/2 mouse device common for all mice [ 1.265947] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.266010] rtc_cmos: probe of rtc_cmos failed with error -38 [ 1.266130] device-mapper: uevent: version 1.0.3 [ 1.266205] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [email protected] [ 1.266220] ledtrig-cpu: registered to indicate activity on CPUs [ 1.266228] EFI Variables Facility v0.08 2004-May-17 [ 1.266405] ashmem: initialized [ 1.266509] TCP: cubic registered [ 1.266617] NET: Registered protocol family 10 [ 1.266818] NET: Registered protocol family 17 [ 1.266836] Key type dns_resolver registered [ 1.266971] Loading module verification certificates [ 1.267738] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: d490763cc418e29de79f40a5aa7d97747ec8882c' [ 1.267764] registered taskstats version 1 [ 1.270903] Key type trusted registered [ 1.273988] Key type encrypted registered [ 1.283139] blkfront: xvda: flush diskcache: enabled using persistent grants [ 1.285501] xvda: unknown partition table [ 1.376298] /build/buildd/linux-3.8.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.376417] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead. [ 1.381438] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.381468] EDD information not available. [ 1.382871] Freeing unused kernel memory: 992k freed [ 1.383446] Write protecting the kernel read-only data: 12288k [ 1.398586] Freeing unused kernel memory: 1176k freed [ 1.400817] Freeing unused kernel memory: 1080k freed Loading, please wait... Begin: Loading essential drivers ... done. [ 1.435193] udevd[92]: starting version 175 Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 1.543418] EXT4-fs (xvda): mounted filesystem with ordered data mode. Opts: (null) Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. [ 2.298070] EXT4-fs (xvda): re-mounted. Opts: errors=remount-ro,barrier=0 [ 3.470300] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin Write failed: Host is down mini:~ bmfrosty$ And here are the bits of syslog I was able to grab: root@maxi:/var/log# tail -f {debug,dmesg,faillog,maillog,messages,secure,spooler,syslog} ==> debug <== ==> dmesg <== sd 4:0:0:0: [sde] Attached SCSI disk ata8.00: configured for UDMA/133 scsi 8:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5 sd 8:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 8:0:0:0: [sdf] Write Protect is off sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sd 8:0:0:0: [sdf] Attached SCSI disk FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. ==> faillog <== ==> maillog <== ==> messages <== ==> secure <== ==> spooler <== ==> syslog <== Feb 1 15:23:39 maxi root: /etc/xen/scripts/vif-bridge: online type_if=vif XENBUS_PATH=backend/vif/1/0 Feb 1 15:23:39 maxi root: /etc/xen/scripts/vif-bridge: Successful vif-bridge online for vif1.0, bridge br0. Feb 1 15:23:39 maxi kernel: device vif1.0 entered promiscuous mode Feb 1 15:23:39 maxi root: /etc/xen/scripts/vif-bridge: Writing backend/vif/1/0/hotplug-status connected to xenstore. Feb 1 15:23:41 maxi kernel: br0: port 2(vif1.0) entered listening state Feb 1 15:23:41 maxi kernel: br0: port 2(vif1.0) entered listening state Feb 1 15:23:56 maxi kernel: br0: port 2(vif1.0) entered learning state Feb 1 15:24:11 maxi kernel: br0: topology change detected, propagating Feb 1 15:24:11 maxi kernel: br0: port 2(vif1.0) entered forwarding state Feb 1 15:24:46 maxi kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Feb 1 15:24:46 maxi kernel: ata1.00: failed command: READ DMA EXT Feb 1 15:24:46 maxi kernel: ata1.00: cmd 25/00:a8:a0:4d:52/00:02:40:00:00/e0 tag 0 dma 348160 in Feb 1 15:24:46 maxi kernel: res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Feb 1 15:24:46 maxi kernel: ata1.00: status: { DRDY } Feb 1 15:24:46 maxi kernel: ata1: hard resetting link Feb 1 15:24:46 maxi kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Feb 1 15:24:46 maxi kernel: ata4.00: failed command: READ DMA EXT Feb 1 15:24:46 maxi kernel: ata4.00: cmd 25/00:a8:a0:4d:52/00:02:40:00:00/e0 tag 0 dma 348160 in Feb 1 15:24:46 maxi kernel: res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Feb 1 15:24:46 maxi kernel: ata4.00: status: { DRDY } Feb 1 15:24:46 maxi kernel: ata4: hard resetting link Feb 1 15:24:46 maxi kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Feb 1 15:24:46 maxi kernel: ata3.00: failed command: READ DMA EXT Feb 1 15:24:46 maxi kernel: ata3.00: cmd 25/00:a8:a0:4d:52/00:02:40:00:00/e0 tag 0 dma 348160 in Feb 1 15:24:46 maxi kernel: res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Feb 1 15:24:46 maxi kernel: ata3.00: status: { DRDY } Feb 1 15:24:46 maxi kernel: ata3: hard resetting link Feb 1 15:24:56 maxi kernel: ata4: softreset failed (1st FIS failed) Feb 1 15:24:56 maxi kernel: ata4: hard resetting link Feb 1 15:24:56 maxi kernel: ata1: softreset failed (1st FIS failed) Feb 1 15:24:56 maxi kernel: ata1: hard resetting link Feb 1 15:24:56 maxi kernel: ata3: softreset failed (1st FIS failed) Feb 1 15:24:56 maxi kernel: ata3: hard resetting link Feb 1 15:25:06 maxi kernel: ata4: softreset failed (1st FIS failed) Feb 1 15:25:06 maxi kernel: ata4: hard resetting link Feb 1 15:25:06 maxi kernel: ata3: softreset failed (1st FIS failed) Feb 1 15:25:06 maxi kernel: ata3: hard resetting link Feb 1 15:25:06 maxi kernel: ata1: softreset failed (1st FIS failed) Feb 1 15:25:06 maxi kernel: ata1: hard resetting link Feb 1 15:25:41 maxi kernel: ata3: softreset failed (1st FIS failed) Feb 1 15:25:41 maxi kernel: ata3: limiting SATA link speed to 3.0 Gbps Feb 1 15:25:41 maxi kernel: ata3: hard resetting link Feb 1 15:25:41 maxi kernel: ata1: softreset failed (1st FIS failed) Feb 1 15:25:41 maxi kernel: ata1: limiting SATA link speed to 3.0 Gbps Feb 1 15:25:41 maxi kernel: ata1: hard resetting link Feb 1 15:25:41 maxi kernel: ata4: softreset failed (1st FIS failed) Feb 1 15:25:41 maxi kernel: ata4: limiting SATA link speed to 3.0 Gbps Feb 1 15:25:41 maxi kernel: ata4: hard resetting link Feb 1 15:25:46 maxi kernel: ata3: softreset failed (1st FIS failed) Feb 1 15:25:46 maxi kernel: ata3: reset failed, giving up Feb 1 15:25:46 maxi kernel: ata3.00: disabled Feb 1 15:25:46 maxi kernel: ata3: EH complete Feb 1 15:25:46 maxi kernel: sd 3:0:0:0: [sdd] Unhandled error code Feb 1 15:25:46 maxi kernel: sd 3:0:0:0: [sdd] Feb 1 15:25:46 maxi kernel: Result: hostbyte=0x04 driverbyte=0x00 Feb 1 15:25:46 maxi kernel: sd 3:0:0:0: [sdd] CDB: Feb 1 15:25:46 maxi kernel: cdb[0]=0x88: 88 00 00 00 00 00 40 52 4d a0 00 00 02 a8 00 00 Feb 1 15:25:46 maxi kernel: end_request: I/O error, dev sdd, sector 1079135648 Feb 1 15:25:46 maxi kernel: ata4: softreset failed (1st FIS failed) Write failed: Host is down mini:~ bmfrosty$ Quote Link to comment
jumperalex Posted February 1, 2014 Share Posted February 1, 2014 how much memory do you have? what is the result of "xl info" Quote Link to comment
bmfrosty Posted February 1, 2014 Share Posted February 1, 2014 After a reboot (4 second power off - whoo!): DMIDECODE: root@maxi:/mnt/cache/xen# dmidecode # dmidecode 2.11 SMBIOS 2.7 present. 52 structures occupying 2329 bytes. Table at 0x000EB2C0. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: American Megatrends Inc. Version: F2 Release Date: 02/01/2013 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 8192 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) ACPI is supported USB legacy is supported BIOS boot specification is supported Targeted content distribution is supported UEFI is supported BIOS Revision: 4.6 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Gigabyte Technology Co., Ltd. Product Name: To be filled by O.E.M. Version: To be filled by O.E.M. Serial Number: To be filled by O.E.M. UUID: 03DE0294-0480-052B-4306-3C0700080009 Wake-up Type: Power Switch SKU Number: To be filled by O.E.M. Family: To be filled by O.E.M. Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: Gigabyte Technology Co., Ltd. Product Name: F2A85X-D3H Version: x.x Serial Number: To be filled by O.E.M. Asset Tag: To be filled by O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To be filled by O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 22 bytes Chassis Information Manufacturer: Gigabyte Technology Co., Ltd. Type: Desktop Lock: Not Present Version: To Be Filled By O.E.M. Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0 SKU Number: To be filled by O.E.M. Handle 0x0004, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1A1 Internal Connector Type: None External Reference Designator: PS2Mouse External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0005, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1A1 Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x0006, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A1 Internal Connector Type: None External Reference Designator: TV Out External Connector Type: Mini Centronics Type-14 Port Type: Other Handle 0x0007, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A2A Internal Connector Type: None External Reference Designator: COM A External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x0008, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A2B Internal Connector Type: None External Reference Designator: Video External Connector Type: DB-15 female Port Type: Video Port Handle 0x0009, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3A1 Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3A1 Internal Connector Type: None External Reference Designator: USB2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3A1 Internal Connector Type: None External Reference Designator: USB3 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9A1 - TPM HDR Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9C1 - PCIE DOCKING CONN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2B3 - CPU FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6C2 - EXT HDMI Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3C1 - GMCH FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1D1 - ITP Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9E2 - MDC INTPSR Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9E4 - MDC INTPSR Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9E3 - LPC HOT DOCKING Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9E1 - SCAN MATRIX Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9G1 - LPC SIDE BAND Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J8F1 - UNIFIED Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6F1 - LVDS Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2F1 - LAI FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2G1 - GFX VID Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1G6 - AC JACK Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001C, DMI type 9, 17 bytes System Slot Information Designation: J6B2 Type: x16 PCI Express Current Usage: In Use Length: Long ID: 0 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:00:02.0 Handle 0x001D, DMI type 9, 17 bytes System Slot Information Designation: J6B1 Type: x1 PCI Express Current Usage: In Use Length: Short ID: 1 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:00:1c.0 Handle 0x001E, DMI type 9, 17 bytes System Slot Information Designation: J6D1 Type: x8 PCI Express Current Usage: In Use Length: Short ID: 2 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:00:01.0 Handle 0x001F, DMI type 9, 17 bytes System Slot Information Designation: J7B1 Type: x16 PCI Express Current Usage: In Use Length: Short ID: 3 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:00:03.0 Handle 0x0020, DMI type 10, 6 bytes On Board Device Information Type: Video Status: Enabled Description: To Be Filled By O.E.M. Handle 0x0021, DMI type 11, 5 bytes OEM Strings String 1: To Be Filled By O.E.M. Handle 0x0022, DMI type 12, 5 bytes System Configuration Options Option 1: To Be Filled By O.E.M. Handle 0x0023, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 8 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0024, DMI type 19, 31 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x003FFFFFFFF Range Size: 16 GB Physical Array Handle: 0x0023 Partition Width: 255 Handle 0x0025, DMI type 17, 34 bytes Memory Device Array Handle: 0x0023 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: Node0_Dimm0 Bank Locator: Node0_Bank0 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: Dimm0_Manufacturer Serial Number: Dimm0_SerNum Asset Tag: Dimm0_AssetTag Part Number: Dimm0_PartNum Rank: Unknown Configured Clock Speed: Unknown Handle 0x0026, DMI type 126, 35 bytes Inactive Handle 0x0027, DMI type 17, 34 bytes Memory Device Array Handle: 0x0023 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: Node0_Dimm1 Bank Locator: Node0_Bank0 Type: DDR3 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 667 MHz Manufacturer: Corsair Serial Number: 00000000 Asset Tag: Dimm1_AssetTag Part Number: CMX16GX3M2A13 Rank: 2 Configured Clock Speed: 9149 MHz Handle 0x0028, DMI type 20, 35 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x001FFFFFFFF Range Size: 8 GB Physical Device Handle: 0x0027 Memory Array Mapped Address Handle: 0x0024 Partition Row Position: 1 Handle 0x0029, DMI type 17, 34 bytes Memory Device Array Handle: 0x0023 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: Node0_Dimm2 Bank Locator: Node0_Bank0 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: Dimm2_Manufacturer Serial Number: Dimm2_SerNum Asset Tag: Dimm2_AssetTag Part Number: Dimm2_PartNum Rank: Unknown Configured Clock Speed: Unknown Handle 0x002A, DMI type 126, 35 bytes Inactive Handle 0x002B, DMI type 17, 34 bytes Memory Device Array Handle: 0x0023 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: Node0_Dimm3 Bank Locator: Node0_Bank0 Type: DDR3 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 667 MHz Manufacturer: Corsair Serial Number: 00000000 Asset Tag: Dimm3_AssetTag Part Number: CMX16GX3M2A13 Rank: 2 Configured Clock Speed: Unknown Handle 0x002C, DMI type 20, 35 bytes Memory Device Mapped Address Starting Address: 0x00200000000 Ending Address: 0x003FFFFFFFF Range Size: 8 GB Physical Device Handle: 0x002B Memory Array Mapped Address Handle: 0x0024 Partition Row Position: 1 Handle 0x002D, DMI type 32, 20 bytes System Boot Information Status: No errors detected Handle 0x002E, DMI type 41, 11 bytes Onboard Device Reference Designation: Onboard LAN Type: Ethernet Status: Enabled Type Instance: 1 Bus Address: 0000:00:19.0 Handle 0x002F, DMI type 7, 19 bytes Cache Information Socket Designation: L1 CACHE Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 96 kB Maximum Size: 96 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: 1 ns Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 2-way Set-associative Handle 0x0030, DMI type 7, 19 bytes Cache Information Socket Designation: L2 CACHE Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 1024 kB Maximum Size: 1024 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: 1 ns Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 16-way Set-associative Handle 0x0039, DMI type 4, 42 bytes Processor Information Socket Designation: P0 Type: Central Processor Family: <OUT OF SPEC> Manufacturer: AuthenticAMD ID: 01 0F 61 00 FF FB 8B 17 Version: AMD A6-5400K APU with Radeon(tm) HD Graphics Voltage: 1.4 V External Clock: 100 MHz Max Speed: 3600 MHz Current Speed: 3600 MHz Status: Populated, Enabled Upgrade: <OUT OF SPEC> L1 Cache Handle: 0x002F L2 Cache Handle: 0x0030 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Core Count: 2 Core Enabled: 2 Thread Count: 2 Characteristics: 64-bit capable Handle 0x003A, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Long Installable Languages: 7 en|US|iso8859-1 de|DE|iso8859-1 ru|RU|iso8859-5 ko|KR|unicode ja|JP|unicode zh|CS|unicode zh|CT|unicode Currently Installed Language: en|US|iso8859-1 Handle 0x003E, DMI type 127, 4 bytes End Of Table root@maxi:/mnt/cache/xen# Quote Link to comment
bmfrosty Posted February 1, 2014 Share Posted February 1, 2014 xl info: root@maxi:/mnt/cache/xen# xl info host : maxi release : 3.10.24p-unRAID version : #13 SMP Thu Jan 30 20:56:49 PST 2014 machine : x86_64 nr_cpus : 2 max_cpu_id : 3 nr_nodes : 1 cores_per_socket : 1 threads_per_core : 2 cpu_mhz : 3600 hw_caps : 178bf3ff:2fd3fbff:00000000:00001700:36983203:00000000:01ebbfff:00000008 virt_caps : hvm hvm_directio total_memory : 15836 free_memory : 13094 sharing_freed_memory : 0 sharing_used_memory : 0 outstanding_claims : 0 free_cpus : 0 xen_major : 4 xen_minor : 3 xen_extra : .1 xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64 xen_scheduler : credit xen_pagesize : 4096 platform_params : virt_start=0xffff800000000000 xen_changeset : xen_commandline : dom0_mem=2097152 cc_compiler : gcc (GCC) 4.8.2 cc_compile_by : root cc_compile_domain : cc_compile_date : Sun Jan 26 19:39:37 PST 2014 xend_config_format : 4 root@maxi:/mnt/cache/xen# Quote Link to comment
bmfrosty Posted February 1, 2014 Share Posted February 1, 2014 dmesg: root@maxi:/mnt/cache/xen# dmesg Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 3.10.24p-unRAID (root@develop64) (gcc version 4.8.2 (GCC) ) #13 SMP Thu Jan 30 20:56:49 PST 2014 Command line: Freeing 9e-100 pfn range: 98 pages freed 1-1 mapping on 9e->100 1-1 mapping on 9e7ea->9f177 1-1 mapping on 9f178->9f37e 1-1 mapping on 9f800->100001 Released 98 pages of unused memory Set 398326 page(s) to 1-1 mapping Populating 80000-80062 pfn range: 98 pages added e820: BIOS-provided physical RAM map: Xen: [mem 0x0000000000000000-0x000000000009dfff] usable Xen: [mem 0x000000000009e800-0x00000000000fffff] reserved Xen: [mem 0x0000000000100000-0x000000009e7e9fff] usable Xen: [mem 0x000000009e7ea000-0x000000009eacafff] reserved Xen: [mem 0x000000009eacb000-0x000000009ee22fff] ACPI NVS Xen: [mem 0x000000009ee23000-0x000000009f176fff] reserved Xen: [mem 0x000000009f177000-0x000000009f177fff] usable Xen: [mem 0x000000009f178000-0x000000009f37dfff] ACPI NVS Xen: [mem 0x000000009f37e000-0x000000009f7fffff] usable Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved Xen: [mem 0x00000000fec10000-0x00000000fec10fff] reserved Xen: [mem 0x00000000fed00000-0x00000000fed00fff] reserved Xen: [mem 0x00000000fed40000-0x00000000fed44fff] reserved Xen: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved Xen: [mem 0x0000000100001000-0x000000043effffff] usable NX (Execute Disable) protection: active SMBIOS 2.7 present. DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-D3H, BIOS F2 02/01/2013 e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable No AGP bridge found e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000 e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000 Base memory trampoline at [ffff880000098000] 98000 size 24576 init_memory_mapping: [mem 0x00000000-0x000fffff] [mem 0x00000000-0x000fffff] page 4k init_memory_mapping: [mem 0x7fe00000-0x7fffffff] [mem 0x7fe00000-0x7fffffff] page 4k BRK [0x01817000, 0x01817fff] PGTABLE BRK [0x01818000, 0x01818fff] PGTABLE init_memory_mapping: [mem 0x7c000000-0x7fdfffff] [mem 0x7c000000-0x7fdfffff] page 4k BRK [0x01819000, 0x01819fff] PGTABLE BRK [0x0181a000, 0x0181afff] PGTABLE BRK [0x0181b000, 0x0181bfff] PGTABLE BRK [0x0181c000, 0x0181cfff] PGTABLE init_memory_mapping: [mem 0x00100000-0x7bffffff] [mem 0x00100000-0x7bffffff] page 4k init_memory_mapping: [mem 0x80000000-0x9e7e9fff] [mem 0x80000000-0x9e7e9fff] page 4k init_memory_mapping: [mem 0x9f177000-0x9f177fff] [mem 0x9f177000-0x9f177fff] page 4k init_memory_mapping: [mem 0x9f37e000-0x9f7fffff] [mem 0x9f37e000-0x9f7fffff] page 4k init_memory_mapping: [mem 0x100001000-0x43effffff] [mem 0x100001000-0x43effffff] page 4k RAMDISK: [mem 0x01c1f000-0x06d81fff] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA) ACPI: XSDT 000000009ee0c080 0007C (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: FACP 000000009ee11f90 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130328/tbfadt-603) ACPI: DSDT 000000009ee0c190 05DFE (v02 ALASKA A M I 00000000 INTL 20051117) ACPI: FACS 000000009ee1bd80 00040 ACPI: APIC 000000009ee12088 00072 (v03 ALASKA A M I 01072009 AMI 00010013) ACPI: FPDT 000000009ee12100 00044 (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: MCFG 000000009ee12148 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) ACPI: HPET 000000009ee12188 00038 (v01 ALASKA A M I 01072009 AMI 00000005) ACPI: IFEU 000000009ee121c0 00042 (v01 ALASKA A M I 01072009 00000000) ACPI: SSDT 000000009ee12208 006B2 (v01 AMD POWERNOW 00000001 AMD 00000001) ACPI: SSDT 000000009ee128c0 004B7 (v02 AMD ALIB 00000001 MSFT 04000000) ACPI: IVRS 000000009ee12d78 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000) ACPI: CRAT 000000009ee12de8 001F8 (v01 AMD AGESA 00000001 AMD 00000001) ACPI: BGRT 000000009ee12fe0 00038 (v00 ALASKA A M I 01072009 AMI 00010013) ACPI: Local APIC address 0xfee00000 Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x43effffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009dfff] node 0: [mem 0x00100000-0x9e7e9fff] node 0: [mem 0x9f177000-0x9f177fff] node 0: [mem 0x9f37e000-0x9f7fffff] node 0: [mem 0x100001000-0x43effffff] On node 0 totalpages: 4054025 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3997 pages, LIFO batch:0 DMA32 zone: 10098 pages used for memmap DMA32 zone: 646253 pages, LIFO batch:31 Normal zone: 53184 pages used for memmap Normal zone: 3403775 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x16] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x17] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10228210 base: 0xfed00000 smpboot: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 40 e820: [mem 0x9f800000-0xfebfffff] available for PCI devices Booting paravirtualized kernel on Xen Xen version: 4.3.1 (preserve-AD) setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff88007da00000 s78976 r8192 d23424 u524288 pcpu-alloc: s78976 r8192 d23424 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3990658 Kernel command line: PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) xsave: enabled xstate_bv 0x7, cntxt size 0x340 software IO TLB [mem 0x68800000-0x6c800000] (64MB) mapped at [ffff880068800000-ffff88006c7fffff] Memory: 1623812k/17809408k available (4729k kernel code, 1593308k absent, 14592288k reserved, 2011k data, 860k init) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. CONFIG_RCU_FANOUT set to non-default value of 32 RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. NR_IRQS:4352 nr_irqs:512 16 xen: sci override: global_irq=9 trigger=0 polarity=1 xen: registering gsi 9 triggering 0 polarity 1 xen: --> pirq=9 -> irq=9 (gsi=9) xen: acpi sci 9 xen: --> pirq=1 -> irq=1 (gsi=1) xen: --> pirq=2 -> irq=2 (gsi=2) xen: --> pirq=3 -> irq=3 (gsi=3) xen: --> pirq=4 -> irq=4 (gsi=4) xen: --> pirq=5 -> irq=5 (gsi=5) xen: --> pirq=6 -> irq=6 (gsi=6) xen: --> pirq=7 -> irq=7 (gsi=7) xen: --> pirq=8 -> irq=8 (gsi= xen: --> pirq=10 -> irq=10 (gsi=10) xen: --> pirq=11 -> irq=11 (gsi=11) xen: --> pirq=12 -> irq=12 (gsi=12) xen: --> pirq=13 -> irq=13 (gsi=13) xen: --> pirq=14 -> irq=14 (gsi=14) xen: --> pirq=15 -> irq=15 (gsi=15) Console: colour VGA+ 80x25 console [tty0] enabled allocated 65011712 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Xen: using vcpuop timer interface installing Xen timer for CPU 0 tsc: Detected 3600.072 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.14 BogoMIPS (lpj=36000720) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys blkio Initializing cgroup subsys perf_event [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support tseg: 009f800000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 2 MCE banks Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512 tlb_flushall_shift: 5 Freeing SMP alternatives: 24k freed ACPI: Core revision 20130328 ACPI: All ACPI Tables successfully acquired cpu 0 spinlock event irq 41 Performance Events: perf: AMD core performance counters detected Broken PMU hardware detected, using software events only. Failed to access perfctr msr (MSR c0010201 is 0) installing Xen timer for CPU 1 cpu 1 spinlock event irq 48 [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support Brought up 2 CPUs devtmpfs: initialized PM: Registering ACPI NVS region [mem 0x9eacb000-0x9ee22fff] (3506176 bytes) PM: Registering ACPI NVS region [mem 0x9f178000-0x9f37dfff] (2121728 bytes) xor: automatically using best checksumming function: avx : 3769.200 MB/sec Grant tables using version 2 layout. Grant table initialized NET: Registered protocol family 16 ACPI: bus type PCI registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access bio: create slab <bio-0> at 0 raid6: sse2x1 4203 MB/s raid6: sse2x2 7225 MB/s raid6: sse2x4 10614 MB/s raid6: using algorithm sse2x4 (10614 MB/s) raid6: using ssse3x2 recovery algorithm ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI BIOS Bug: Warning: Incorrect checksum in table [bGRT] - 0xD4, should be 0xE6 (20130328/tbutils-324) ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000 pci 0000:00:00.2: [1022:1419] type 00 class 0x080600 pci 0000:00:01.0: [1002:9991] type 00 class 0x030000 pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff] pci 0000:00:01.0: reg 18: [mem 0xfef00000-0xfef3ffff] pci 0000:00:01.0: supports D1 D2 pci 0000:00:01.1: [1002:9902] type 00 class 0x040300 pci 0000:00:01.1: reg 10: [mem 0xfef44000-0xfef47fff] pci 0000:00:01.1: supports D1 D2 pci 0000:00:04.0: [1022:1414] type 01 class 0x060400 pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: System wakeup disabled by ACPI pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330 pci 0000:00:10.0: reg 10: [mem 0xfef4a000-0xfef4bfff 64bit] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold pci 0000:00:10.0: System wakeup disabled by ACPI pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330 pci 0000:00:10.1: reg 10: [mem 0xfef48000-0xfef49fff 64bit] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold pci 0000:00:10.1: System wakeup disabled by ACPI pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 pci 0000:00:11.0: reg 10: [io 0xf140-0xf147] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f] pci 0000:00:11.0: reg 24: [mem 0xfef51000-0xfef517ff] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 pci 0000:00:12.0: reg 10: [mem 0xfef50000-0xfef50fff] pci 0000:00:12.0: System wakeup disabled by ACPI pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 pci 0000:00:12.2: reg 10: [mem 0xfef4f000-0xfef4f0ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: System wakeup disabled by ACPI pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 pci 0000:00:13.0: reg 10: [mem 0xfef4e000-0xfef4efff] pci 0000:00:13.0: System wakeup disabled by ACPI pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 pci 0000:00:13.2: reg 10: [mem 0xfef4d000-0xfef4d0ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: System wakeup disabled by ACPI pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 pci 0000:00:14.2: reg 10: [mem 0xfef40000-0xfef43fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: System wakeup disabled by ACPI pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 pci 0000:00:14.4: [1022:780f] type 01 class 0x060401 pci 0000:00:14.4: System wakeup disabled by ACPI pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310 pci 0000:00:14.5: reg 10: [mem 0xfef4c000-0xfef4cfff] pci 0000:00:14.5: System wakeup disabled by ACPI pci 0000:00:18.0: [1022:1400] type 00 class 0x060000 pci 0000:00:18.1: [1022:1401] type 00 class 0x060000 pci 0000:00:18.2: [1022:1402] type 00 class 0x060000 pci 0000:00:18.3: [1022:1403] type 00 class 0x060000 pci 0000:00:18.4: [1022:1404] type 00 class 0x060000 pci 0000:00:18.5: [1022:1405] type 00 class 0x060000 pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref] pci 0000:01:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:00.0: System wakeup disabled by ACPI pci 0000:00:04.0: PCI bridge to [bus 01] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d) acpi PNP0A03:00: ACPI _OSC control (0x1d) granted ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 acpi root: \_SB_.PCI0 notify handler is installed Found 1 acpi root devices xen/balloon: Initialising balloon driver. xen-balloon: Initialising balloon driver. vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:01.0 SCSI subsystem initialized ACPI: bus type ATA registered libata version 3.00 loaded. ACPI: bus type USB registered Quote Link to comment
jumperalex Posted February 1, 2014 Share Posted February 1, 2014 Ok sorry, i got nothin' Quote Link to comment
bmfrosty Posted February 1, 2014 Share Posted February 1, 2014 dmesg part 2: usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] e820: reserve RAM buffer [mem 0x9e7ea000-0x9fffffff] e820: reserve RAM buffer [mem 0x9f178000-0x9fffffff] e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff] Switching to clocksource xen pnp: PnP ACPI init ACPI: bus type PNP registered system 00:00: [mem 0xe0000000-0xefffffff] has been reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x040b] has been reserved system 00:01: [io 0x04d6] has been reserved system 00:01: [io 0x0c00-0x0c01] has been reserved system 00:01: [io 0x0c14] has been reserved system 00:01: [io 0x0c50-0x0c51] has been reserved system 00:01: [io 0x0c52] has been reserved system 00:01: [io 0x0c6c] has been reserved system 00:01: [io 0x0c6f] has been reserved system 00:01: [io 0x0cd0-0x0cd1] has been reserved system 00:01: [io 0x0cd2-0x0cd3] has been reserved system 00:01: [io 0x0cd4-0x0cd5] has been reserved system 00:01: [io 0x0cd6-0x0cd7] has been reserved system 00:01: [io 0x0cd8-0x0cdf] has been reserved system 00:01: [io 0x0800-0x089f] has been reserved system 00:01: [io 0x0b20-0x0b3f] has been reserved system 00:01: [io 0x0900-0x090f] has been reserved system 00:01: [io 0x0910-0x091f] has been reserved system 00:01: [io 0xfe00-0xfefe] has been reserved system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved system 00:01: [mem 0xff000000-0xffffffff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:02: [io 0x0220-0x0227] has been reserved system 00:02: [io 0x0228-0x0237] has been reserved system 00:02: [io 0x0a20-0x0a2f] has been reserved system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) xen: registering gsi 4 triggering 1 polarity 0 pnp 00:03: [dma 0 disabled] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) xen: registering gsi 8 triggering 1 polarity 0 pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) system 00:07: [io 0x04d0-0x04d1] has been reserved system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) xen: registering gsi 13 triggering 1 polarity 0 pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:0a: [mem 0xa0000000-0xbfffffff] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:0b: [mem 0xfeb80000-0xfebfffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active) pnp: PnP ACPI: found 13 devices ACPI: bus type PNP unregistered PM-Timer failed consistency check (0x0xffffff) - aborting. pci 0000:00:04.0: PCI bridge to [bus 01] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 02] xen: registering gsi 16 triggering 0 polarity 1 xen: --> pirq=16 -> irq=16 (gsi=16) pci_bus 0000:00: resource 4 [io 0x0000-0x03af] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] pci_bus 0000:02: resource 4 [io 0x0000-0x03af] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff] NET: Registered protocol family 2 TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP: reno registered UDP hash table entries: 8192 (order: 6, 262144 bytes) UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:01.0: Boot video device xen: registering gsi 18 triggering 0 polarity 1 xen: --> pirq=18 -> irq=18 (gsi=18) xen: registering gsi 17 triggering 0 polarity 1 xen: --> pirq=17 -> irq=17 (gsi=17) xen: registering gsi 18 triggering 0 polarity 1 Already setup the GSI :18 xen: registering gsi 17 triggering 0 polarity 1 Already setup the GSI :17 xen: registering gsi 18 triggering 0 polarity 1 Already setup the GSI :18 xen: registering gsi 17 triggering 0 polarity 1 Already setup the GSI :17 xen: registering gsi 18 triggering 0 polarity 1 Already setup the GSI :18 PCI: CLS 64 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 83340k freed perf: AMD NB counters detected Installing knfsd (copyright (C) 1996 [email protected]). fuse init (API version 7.22) bio: create slab <bio-1> at 1 Btrfs loaded msgmni has been set to 3334 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered (default) io scheduler deadline registered io scheduler cfq registered pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt pci 0000:01:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] Warning: Processor Platform Limit not supported. Event-channel device installed. xen-pciback: backend is vpci Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A lp: driver loaded but no devices found hpet_acpi_add: no address or irqs in _CRS Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using getrawmonotonic(). loop: module loaded ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver xen: registering gsi 17 triggering 0 polarity 1 Already setup the GSI :17 ehci-pci 0000:00:12.2: EHCI Host Controller ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 QUIRK: Enable AMD PLL fix ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci-pci 0000:00:12.2: debug port 1 ehci-pci 0000:00:12.2: irq 17, io mem 0xfef4f000 ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected xen: registering gsi 17 triggering 0 polarity 1 Already setup the GSI :17 ehci-pci 0000:00:13.2: EHCI Host Controller ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci-pci 0000:00:13.2: debug port 1 ehci-pci 0000:00:13.2: irq 17, io mem 0xfef4d000 ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver xen: registering gsi 18 triggering 0 polarity 1 Already setup the GSI :18 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 18, io mem 0xfef50000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 5 ports detected xen: registering gsi 18 triggering 0 polarity 1 Already setup the GSI :18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfef4e000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected xen: registering gsi 18 triggering 0 polarity 1 Already setup the GSI :18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfef4c000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd: USB Universal Host Controller Interface driver xen: registering gsi 18 triggering 0 polarity 1 Already setup the GSI :18 xhci_hcd 0000:00:10.0: xHCI Host Controller xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected xhci_hcd 0000:00:10.0: xHCI Host Controller xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected xen: registering gsi 17 triggering 0 polarity 1 Already setup the GSI :17 xhci_hcd 0000:00:10.1: xHCI Host Controller xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected xhci_hcd 0000:00:10.1: xHCI Host Controller xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 9-0:1.0: USB hub found hub 9-0:1.0: 2 ports detected usbcore: registered new interface driver usb-storage i8042: PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input2 rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver ipip: IPv4 over IPv4 tunneling driver gre: GRE over IPv4 demultiplexor driver ip_gre: GRE over IPv4 tunneling driver IPv4 over IPSec tunneling driver TCP: cubic registered NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:05: setting system clock to 2014-02-01 23:32:07 UTC (1391297527) usb 3-4: new low-speed USB device number 2 using ohci_hcd input: HID 04d9:1203 as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.0/input/input3 hid-generic 0003:04D9:1203.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-0000:00:12.0-4/input0 input: HID 04d9:1203 as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.1/input/input4 hid-generic 0003:04D9:1203.0002: input,hidraw1: USB HID v1.11 Device [HID 04d9:1203] on usb-0000:00:12.0-4/input1 usb 8-1: new high-speed USB device number 2 using xhci_hcd usb-storage 8-1:1.0: USB Mass Storage device detected Quote Link to comment
bmfrosty Posted February 1, 2014 Share Posted February 1, 2014 dmesg part 3. scsi0 : usb-storage 8-1:1.0 scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS sd 0:0:0:0: [sda] 15622144 512-byte logical blocks: (7.99 GB/7.44 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 sd 0:0:0:0: [sda] No Caching mode page found sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] No Caching mode page found sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 0:0:0:0: [sda] No Caching mode page found sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] Attached SCSI removable disk floppy0: no floppy controllers found Freeing unused kernel memory: 860k freed udevd[797]: starting version 182 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded xen: registering gsi 16 triggering 0 polarity 1 Already setup the GSI :16 r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000000c000, 94:de:80:2b:43:3c, XID 0c900800 IRQ 65 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] ahci 0000:00:11.0: version 3.0 xen: registering gsi 19 triggering 0 polarity 1 xen: --> pirq=19 -> irq=19 (gsi=19) ahci 0000:00:11.0: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x8f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci scsi6 : ahci scsi7 : ahci scsi8 : ahci ata1: SATA max UDMA/133 abar m2048@0xfef51000 port 0xfef51100 irq 66 ata2: SATA max UDMA/133 abar m2048@0xfef51000 port 0xfef51180 irq 66 ata3: SATA max UDMA/133 abar m2048@0xfef51000 port 0xfef51200 irq 66 ata4: SATA max UDMA/133 abar m2048@0xfef51000 port 0xfef51280 irq 66 ata5: DUMMY ata6: DUMMY ata7: DUMMY ata8: SATA max UDMA/133 abar m2048@0xfef51000 port 0xfef51480 irq 66 piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: ATA-9: WDC WD30EFRX-68AX9N0, WD-WMC1T3206580, 80.00A80, max UDMA/133 ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata2.00: ATA-9: WDC WD30EFRX-68AX9N0, WD-WMC1T3212860, 80.00A80, max UDMA/133 ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata3.00: ATA-9: WDC WD30EFRX-68AX9N0, WD-WMC1T3179552, 80.00A80, max UDMA/133 ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata4.00: ATA-9: WDC WD30EFRX-68AX9N0, WD-WMC1T1190940, 80.00A80, max UDMA/133 ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata2.00: configured for UDMA/133 ata4.00: configured for UDMA/133 ata3.00: configured for UDMA/133 ata1.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 80.0 PQ: 0 ANSI: 5 scsi 2:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 80.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 1:0:0:0: [sdb] 4096-byte physical blocks sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 2:0:0:0: [sdc] 4096-byte physical blocks sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 3:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 80.0 PQ: 0 ANSI: 5 scsi 4:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 80.0 PQ: 0 ANSI: 5 sd 4:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 4:0:0:0: [sde] 4096-byte physical blocks sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 3:0:0:0: [sdd] 4096-byte physical blocks sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata8.00: ATA-7: ST3500641AS, 3PM00J4V, 3.AAD, max UDMA/133 ata8.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk sde: sde1 sdc: sdc1 sd 4:0:0:0: [sde] Attached SCSI disk sd 2:0:0:0: [sdc] Attached SCSI disk sdd: sdd1 sd 3:0:0:0: [sdd] Attached SCSI disk ata8.00: configured for UDMA/133 scsi 8:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5 sd 8:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 8:0:0:0: [sdf] Write Protect is off sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sd 8:0:0:0: [sdf] Attached SCSI disk FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Bridge firewalling registered r8169 0000:01:00.0 eth0: link down r8169 0000:01:00.0 eth0: link down device eth0 entered promiscuous mode xen-acpi-processor: Uploading Xen processor PM info md: unRAID driver 2.2.0 installed mdcmd (1): import 0 8,16 2930266532 WDC_WD30EFRX-68AX9N0_WD-WMC1T3206580 md: import disk0: [8,16] (sdb) WDC_WD30EFRX-68AX9N0_WD-WMC1T3206580 size: 2930266532 mdcmd (2): import 1 8,32 2930266532 WDC_WD30EFRX-68AX9N0_WD-WMC1T3212860 md: import disk1: [8,32] (sdc) WDC_WD30EFRX-68AX9N0_WD-WMC1T3212860 size: 2930266532 mdcmd (3): import 2 8,48 2930266532 WDC_WD30EFRX-68AX9N0_WD-WMC1T3179552 md: import disk2: [8,48] (sdd) WDC_WD30EFRX-68AX9N0_WD-WMC1T3179552 size: 2930266532 mdcmd (4): import 3 8,64 2930266532 WDC_WD30EFRX-68AX9N0_WD-WMC1T1190940 md: import disk3: [8,64] (sde) WDC_WD30EFRX-68AX9N0_WD-WMC1T1190940 size: 2930266532 mdcmd (5): import 4 0,0 mdcmd (6): import 5 0,0 mdcmd (7): import 6 0,0 mdcmd (: import 7 0,0 mdcmd (9): import 8 0,0 mdcmd (10): import 9 0,0 mdcmd (11): import 10 0,0 mdcmd (12): import 11 0,0 mdcmd (13): import 12 0,0 mdcmd (14): import 13 0,0 mdcmd (15): import 14 0,0 mdcmd (16): import 15 0,0 mdcmd (17): import 16 0,0 mdcmd (18): import 17 0,0 mdcmd (19): import 18 0,0 mdcmd (20): import 19 0,0 mdcmd (21): import 20 0,0 mdcmd (22): import 21 0,0 mdcmd (23): import 22 0,0 mdcmd (24): import 23 0,0 r8169 0000:01:00.0 eth0: link up br0: port 1(eth0) entered listening state br0: port 1(eth0) entered listening state br0: port 1(eth0) entered learning state br0: topology change detected, propagating br0: port 1(eth0) entered forwarding state md: unRAID driver removed md: unRAID driver 2.2.0 installed mdcmd (1): import 0 8,16 2930266532 WDC_WD30EFRX-68AX9N0_WD-WMC1T3206580 md: import disk0: [8,16] (sdb) WDC_WD30EFRX-68AX9N0_WD-WMC1T3206580 size: 2930266532 mdcmd (2): import 1 8,32 2930266532 WDC_WD30EFRX-68AX9N0_WD-WMC1T3212860 md: import disk1: [8,32] (sdc) WDC_WD30EFRX-68AX9N0_WD-WMC1T3212860 size: 2930266532 mdcmd (3): import 2 8,48 2930266532 WDC_WD30EFRX-68AX9N0_WD-WMC1T3179552 md: import disk2: [8,48] (sdd) WDC_WD30EFRX-68AX9N0_WD-WMC1T3179552 size: 2930266532 mdcmd (4): import 3 8,64 2930266532 WDC_WD30EFRX-68AX9N0_WD-WMC1T1190940 md: import disk3: [8,64] (sde) WDC_WD30EFRX-68AX9N0_WD-WMC1T1190940 size: 2930266532 mdcmd (5): import 4 0,0 mdcmd (6): import 5 0,0 mdcmd (7): import 6 0,0 mdcmd (: import 7 0,0 mdcmd (9): import 8 0,0 mdcmd (10): import 9 0,0 mdcmd (11): import 10 0,0 mdcmd (12): import 11 0,0 mdcmd (13): import 12 0,0 mdcmd (14): import 13 0,0 mdcmd (15): import 14 0,0 mdcmd (16): import 15 0,0 mdcmd (17): import 16 0,0 mdcmd (18): import 17 0,0 mdcmd (19): import 18 0,0 mdcmd (20): import 19 0,0 mdcmd (21): import 20 0,0 mdcmd (22): import 21 0,0 mdcmd (23): import 22 0,0 mdcmd (24): import 23 0,0 mdcmd (25): set md_num_stripes 1280 mdcmd (26): set md_write_limit 768 mdcmd (27): set md_sync_window 384 mdcmd (28): set spinup_group 0 0 mdcmd (29): set spinup_group 1 0 mdcmd (30): set spinup_group 2 0 mdcmd (31): set spinup_group 3 0 mdcmd (32): spinup 0 mdcmd (33): spinup 1 mdcmd (34): spinup 2 mdcmd (35): spinup 3 mdcmd (36): start STOPPED unraid: allocating 26340K for 1280 stripes (4 disks) md1: running, size: 2930266532 blocks md2: running, size: 2930266532 blocks md3: running, size: 2930266532 blocks REISERFS (device md1): found reiserfs format "3.6" with standard journal REISERFS (device md1): using ordered data mode reiserfs: using flush barriers REISERFS (device md1): journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device md1): checking transaction log (md1) REISERFS (device md1): replayed 2 transactions in 0 seconds REISERFS (device md1): Using r5 hash to sort names REISERFS (device md2): found reiserfs format "3.6" with standard journal REISERFS (device md2): using ordered data mode reiserfs: using flush barriers REISERFS (device md2): journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device md2): checking transaction log (md2) REISERFS (device md2): replayed 2 transactions in 0 seconds REISERFS (device md2): Using r5 hash to sort names REISERFS (device md3): found reiserfs format "3.6" with standard journal REISERFS (device md3): using ordered data mode reiserfs: using flush barriers REISERFS (device md3): journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device md3): checking transaction log (md3) REISERFS (device md3): replayed 2 transactions in 0 seconds REISERFS (device md3): Using r5 hash to sort names REISERFS (device sdf1): found reiserfs format "3.6" with standard journal REISERFS (device sdf1): using ordered data mode reiserfs: using flush barriers REISERFS (device sdf1): journal params: device sdf1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sdf1): checking transaction log (sdf1) REISERFS (device sdf1): replayed 46 transactions in 6 seconds REISERFS (device sdf1): Using r5 hash to sort names mdcmd (37): check CORRECT md: recovery thread woken up ... md: recovery thread checking parity... md: using 1536k window, over a total of 2930266532 blocks. root@maxi:/mnt/cache/xen# Quote Link to comment
SchoolBusDriver Posted February 1, 2014 Share Posted February 1, 2014 Pastebin is your friend and mine. You can put of all that stuff on there and paste links. Quote Link to comment
bmfrosty Posted February 1, 2014 Share Posted February 1, 2014 Ok sorry, i got nothin' I don't exactly expect this one to be easy to diagnose. I'm probably going to give Stacklet $10 and try some different releases. Xen seems like it tends to expose bugs. Quote Link to comment
bmfrosty Posted February 2, 2014 Share Posted February 2, 2014 Same or similar with Fedora 20. I'll catch some syslog output tomorrow. For tonight, bed. Quote Link to comment
coppit Posted February 2, 2014 Share Posted February 2, 2014 Tom, what level of support are you planning for VMs? Are you just providing the bare capability, and the community does the rest, or are you planning to implement some amount of unraid integration? For example, I'm planning on putting my VMs on an SSD outside the array, for performance reasons. I'd also like them to start and stop automatically with unraid/dom0. If we have to roll our own solutions for that, that's fine. I'm just wondering if I should wait for you, or start working on a solution. If it's the latter, then I have some more questions about mounting /mnt/vms before rc.xendomains runs. Quote Link to comment
dlandon Posted February 2, 2014 Share Posted February 2, 2014 I've been trying to keep up with all the v6 posts. I haven't seen anything about this issue so far. I apologize if this is a duplicate. Boot selection "Xen/unRAID OS Safe Mode (no plugins)" installs plugins. Quote Link to comment
ironicbadger Posted February 2, 2014 Share Posted February 2, 2014 I would just like to say that I've experienced no issues since migrating my main array to v6, all the xen stuff is working great and just in general ... Great job Tom on v6. Seems to be shaping up into a great release. Should push sales like mad. Sent from my Nexus 5 using Tapatalk Quote Link to comment
BrianL62 Posted February 3, 2014 Share Posted February 3, 2014 I get the following error when I try to create the VM... Any ideas? This on a ASROCK Z87 Extreme6 with a 4770 cpu....Haswell Quote Link to comment
tallnerd1985 Posted February 3, 2014 Share Posted February 3, 2014 I get the following error when I try to create the VM... Any ideas? This on a ASROCK Z87 Extreme6 with a 4770 cpu....Haswell Did you make sure to turn on the bridge under Network settings and name the bridge xenbr0? Sent from my LG-VS980 using Tapatalk Quote Link to comment
BrianL62 Posted February 3, 2014 Share Posted February 3, 2014 I get the following error when I try to create the VM... Any ideas? This on a ASROCK Z87 Extreme6 with a 4770 cpu....Haswell Did you make sure to turn on the bridge under Network settings and name the bridge xenbr0? Sent from my LG-VS980 using Tapatalk That did it, so simple !! Thanks. Quote Link to comment
nacat78 Posted February 3, 2014 Share Posted February 3, 2014 I am not seeing that setting under the network settings page: Bridge and Bridge Name... is there a way to make it visible. i can see the setting in the network.cfg file, just not in the GUI. So i setup xenbr0 in network.cfg and rebooted: also get this when trying to launch VM Parsing config from ubuntu.13-04.xfce.x86-64.20130424.pygrub.cfg ': lexical errore.x86-64.20130424.pygrub.cfg:1: config parsing error near ` ': lexical errore.x86-64.20130424.pygrub.cfg:2: config parsing error near ` ': lexical errore.x86-64.20130424.pygrub.cfg:3: config parsing error near ` ': lexical errore.x86-64.20130424.pygrub.cfg:4: config parsing error near ` ': lexical errore.x86-64.20130424.pygrub.cfg:5: config parsing error near ` ': lexical errore.x86-64.20130424.pygrub.cfg:6: config parsing error near ` ': lexical errore.x86-64.20130424.pygrub.cfg:7: config parsing error near ` Failed to parse config: Invalid argument Quote Link to comment
soana Posted February 3, 2014 Share Posted February 3, 2014 Just want to confirm that I got the beta 3 working per Tom's instructions. Hardware on my test server per the picture attached, I had to upgrade to 4Gb of RAM since the initial 2Gb were not enough for Xen. Thank you Tom for making the VM's possible. Quote Link to comment
pyrater Posted February 3, 2014 Share Posted February 3, 2014 I am only seeing 8 of my 12 cores and 2 gigs of my 8 gigs of ram. Any guesses? (using beta 3) I also have 4 folders for plugins, which is right flash/extra (htop, plex) flash/packages (ncurses-5.9-x86_64-2.txz) flash/plugins (dynamix and vfs recycle) flash/config/plugins (alot of data files for plugins) Quote Link to comment
tallnerd1985 Posted February 3, 2014 Share Posted February 3, 2014 I am not seeing that setting under the network settings page: Bridge and Bridge Name... is there a way to make it visible. i can see the setting in the network.cfg file, just not in the GUI. So i setup xenbr0 in network.cfg and rebooted: also get this when trying to launch VM Parsing config from ubuntu.13-04.xfce.x86-64.20130424.pygrub.cfg ': lexical errore.x86-64.20130424.pygrub.cfg:1: config parsing error near ` ': lexical errore.x86-64.20130424.pygrub.cfg:2: config parsing error near ` ': lexical errore.x86-64.20130424.pygrub.cfg:3: config parsing error near ` ': lexical errore.x86-64.20130424.pygrub.cfg:4: config parsing error near ` ': lexical errore.x86-64.20130424.pygrub.cfg:5: config parsing error near ` ': lexical errore.x86-64.20130424.pygrub.cfg:6: config parsing error near ` ': lexical errore.x86-64.20130424.pygrub.cfg:7: config parsing error near ` Failed to parse config: Invalid argument In Ubuntu.x86-64.20130424.pygrub.cfg did you make sure to point to the location of the image? Along with the webgui, did you update to the latest webgui? Sent from my LG-VS980 using Tapatalk Quote Link to comment
pyrater Posted February 3, 2014 Share Posted February 3, 2014 I get the same error with a custom .cfg i made trying to boot windows, however my .cfg for ubuntu works fine.. Quote Link to comment
BLKMGK Posted February 3, 2014 Share Posted February 3, 2014 What are you guys editing the cfg files with? Don't use Notepad if that's what you've used... Sent from my iPad using Tapatalk Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.