LinuxGuyGary Posted February 12, 2014 Share Posted February 12, 2014 Never used crashplan but will add it to the repo this evening. Perfect ! Thanks for all of your hard work on behalf of the community! -Gary Link to comment
HAVOC Posted February 12, 2014 Share Posted February 12, 2014 Got the VM up and running, I am having trouble mounting my shares. I edited my fstab with no avail # # /etc/fstab: static file system information # # <file system> <dir> <type> <options> <dump> <pass> #192.168.1.6:/mnt/user/DVDs/ /mnt/Tower nfs rw,rsize=4096,wsize=4096$ //Tower/user/DVDs/ /mnt/Tower cifs rw,guest,uid=owncloud,iocharset=utf$ # /dev/xvda1 UUID=93ec2c22-36c1-487c-a888-adde602a16fe / ext4 $ then I get this error [root@ArchApplianceVM_v3 ~]# mount -a mount: failed to parse mount options Link to comment
jbartlett Posted February 12, 2014 Share Posted February 12, 2014 Got the VM up and running, I am having trouble mounting my shares. I edited my fstab with no avail # # /etc/fstab: static file system information # # <file system> <dir> <type> <options> <dump> <pass> #192.168.1.6:/mnt/user/DVDs/ /mnt/Tower nfs rw,rsize=4096,wsize=4096$ //Tower/user/DVDs/ /mnt/Tower cifs rw,guest,uid=owncloud,iocharset=utf$ # /dev/xvda1 UUID=93ec2c22-36c1-487c-a888-adde602a16fe / ext4 $ then I get this error [root@ArchApplianceVM_v3 ~]# mount -a mount: failed to parse mount options This is what I used and as is, the permissions utilize the guest account in unraid for a read-only share. Change "ro" to "rw" for a read-write share and the permissions if you wish to use another user. //192.168.1.6/Movies /mnt/Movies cifs noauto,x-systemd.automount,ro,username=nobody,password=,_netdev 0 0 Link to comment
HAVOC Posted February 12, 2014 Share Posted February 12, 2014 Like that? This is pretty frustrating cant mnt plex shares.......I'm beginning to question my switch over to the vm. # /etc/fstab: static file system information # # <file system> <dir> <type> <options> <dump> <pass> #//192.168.1.6/DVDs /mnt/DVDs cifs noauto,x-systemd.automount,ro,username=nobody,password=,_netdev 0 0 # /dev/xvda1 Link to comment
jbartlett Posted February 12, 2014 Share Posted February 12, 2014 Like that? This is pretty frustrating cant mnt plex shares.......I'm beginning to question my switch over to the vm. # /etc/fstab: static file system information # # <file system> <dir> <type> <options> <dump> <pass> #//192.168.1.6/DVDs /mnt/DVDs cifs noauto,x-systemd.automount,ro,username=nobody,password=,_netdev 0 0 # /dev/xvda1 Looks good. Try it and see. The share is automounted when first accessed so if you try to do a LS on /mnt/DVDs, it may return an error for a few seconds though I haven't had any issues with Plex running on those shares to access my media. I think the /mnt/DVDs placeholder directory needs to exist prior. If it fails to mount at boot, the fail message will give you a command to enter to see why it failed. Link to comment
HAVOC Posted February 12, 2014 Share Posted February 12, 2014 hmmmm... [root@ArchApplianceVM_v3 ~]# cd /mnt/DVDs -bash: cd: /mnt/DVDs: No such file or directory I thought for sure this was the easy part. Link to comment
jbartlett Posted February 12, 2014 Share Posted February 12, 2014 hmmmm... [root@ArchApplianceVM_v3 ~]# cd /mnt/DVDs -bash: cd: /mnt/DVDs: No such file or directory I thought for sure this was the easy part. I'm not sure you're joking or not but I'm assuming you should also type in first: mkdir /mnt/DVDs Link to comment
HAVOC Posted February 12, 2014 Share Posted February 12, 2014 No joke sir. I'm an idiot at this stuff. Looks like I can cd into it the DVDs directory but I can't figure out how to add to plex. Link to comment
jbartlett Posted February 12, 2014 Share Posted February 12, 2014 No joke sir. I'm an idiot at this stuff. Looks like I can cd into it the DVDs directory but I can't figure out how to add to plex. Do not proceed until you can type in at the bash prompt "ls -l /mnt/DVDs" and get the listing of files & directories you expect. First, view your plex admin, change IP to match yours: http://192.168.1.201:32400/web/ Click on the "+" icon under "My Library" Click on the "Movies" icon Type a name for the library section and click on "Add Folder" Type in "/mnt/DVDs" in the text field or browse to the location and click "Add". Based on the size of your library, it may take some time to display everything. There is an activity icon at the top of the page to let you follow the status. Link to comment
ironicbadger Posted February 12, 2014 Author Share Posted February 12, 2014 No joke sir. I'm an idiot at this stuff. Looks like I can cd into it the DVDs directory but I can't figure out how to add to plex. Hey dude, Welcome to Linux! I can sense your frustration from here, but don't be disheartened by having these teething issues (and they are just that) you are probably learning a great deal. Stick at it, its worth it. As for your original issue it looks like some errant $ exist in your fstab file? I'll double my instructions tomorrow just in case that was my fault. To be clear when trying to mount something via fstab both parts must exists. So before you can mount your unraid it must exist (obviously) but the same goes for the second half of the equation, your mount point. In your case this appears to be /mnt/DVDs so make sure that exists by doing the mkdir command. mkdir /mnt/DVDs mount -a ls /mnt/DVDs Did that show you your file listing? Good. Move on. Then in plex adding a library section should take seconds. Login via your IP to plex, usually something like 192.168.0.4:32400/web Will work. Then look for add section, then navigate to /mnt/DVDs That /should/ be it. Sent from my Nexus 5 using Tapatalk Link to comment
ironicbadger Posted February 12, 2014 Author Share Posted February 12, 2014 @jbartlett good advice You beat me to it! Damn phone keyboards. Sent from my Nexus 5 using Tapatalk Link to comment
jbartlett Posted February 12, 2014 Share Posted February 12, 2014 As for your original issue it looks like some errant $ exist in your fstab file? I'll double my instructions tomorrow just in case that was my fault. I believe the $ sign is indicating that there's more data to display at the end of line inside nano. Link to comment
ironicbadger Posted February 12, 2014 Author Share Posted February 12, 2014 Ah yes. Wonder what the issue is then. Sent from my Nexus 5 using Tapatalk Link to comment
jbartlett Posted February 12, 2014 Share Posted February 12, 2014 [glow=red,2,300]//Tower/user/DVDs/[/glow] /mnt/Tower cifs rw,guest,uid=owncloud,iocharset=utf$ Note the glowing part. This assumes that your UNRAID server is named "Tower", you have a share configured in UNRAID named "user", and there's a directory under that share named "DVDs". From my experience, it is best to reference the IP address of the UNRAID server if you have a static IP address configured. Otherwise, you'll need to continue to refer to it by it's "Tower" label. You can test the share's address in Windows Explorer by typing it in using "\" instead of "/". If you can't browse to "\\Tower\user\DVDs" using Windows Explorer, you WON'T be amount to successfully mount the share in the VM. Assuming that you have an UNRAID share named "DVDs", you'll want to test the share out in Windows Explorer by navigating to "\\Tower\DVDs". If it is successful, enter into the /etc/fstab file "//tower/DVDs" Link to comment
HAVOC Posted February 12, 2014 Share Posted February 12, 2014 Thanks for the support. I believe I have Unraid on a static ip of 192.168.1.6. I will change the stab to reflect the change in user which doesn't exist. Link to comment
MyKroFt Posted February 12, 2014 Share Posted February 12, 2014 the -w param for nano will not cause line wrap - ex nano -w filename.... Myk As for your original issue it looks like some errant $ exist in your fstab file? I'll double my instructions tomorrow just in case that was my fault. I believe the $ sign is indicating that there's more data to display at the end of line inside nano. Link to comment
MyKroFt Posted February 12, 2014 Share Posted February 12, 2014 suggestion, the pacman update of: pacman -Syu could possibly be added to a daily cron to keep it updated by default in the image? thanks for the work Myk Link to comment
HAVOC Posted February 12, 2014 Share Posted February 12, 2014 No joke sir. I'm an idiot at this stuff. Looks like I can cd into it the DVDs directory but I can't figure out how to add to plex. Hey dude, Welcome to Linux! I can sense your frustration from here, but don't be disheartened by having these teething issues (and they are just that) you are probably learning a great deal. Stick at it, its worth it. As for your original issue it looks like some errant $ exist in your fstab file? I'll double my instructions tomorrow just in case that was my fault. To be clear when trying to mount something via fstab both parts must exists. So before you can mount your unraid it must exist (obviously) but the same goes for the second half of the equation, your mount point. In your case this appears to be /mnt/DVDs so make sure that exists by doing the mkdir command. mkdir /mnt/DVDs mount -a ls /mnt/DVDs Did that show you your file listing? Good. Move on. Then in plex adding a library section should take seconds. Login via your IP to plex, usually something like 192.168.0.4:32400/web Will work. Then look for add section, then navigate to /mnt/DVDs That /should/ be it. Sent from my Nexus 5 using Tapatalk Thanks for the good work I apologize for my short bus knowledge of linux. The command after mkdir shows [root@ArchApplianceVM_v3 ~]# ls /mnt/DVDs [root@ArchApplianceVM_v3 ~]# Link to comment
HAVOC Posted February 12, 2014 Share Posted February 12, 2014 No joke sir. I'm an idiot at this stuff. Looks like I can cd into it the DVDs directory but I can't figure out how to add to plex. Do not proceed until you can type in at the bash prompt "ls -l /mnt/DVDs" and get the listing of files & directories you expect. First, view your plex admin, change IP to match yours: http://192.168.1.201:32400/web/ Click on the "+" icon under "My Library" Click on the "Movies" icon Type a name for the library section and click on "Add Folder" Type in "/mnt/DVDs" in the text field or browse to the location and click "Add". Based on the size of your library, it may take some time to display everything. There is an activity icon at the top of the page to let you follow the status. I ran the command and this is the read out [root@ArchApplianceVM_v3 ~]# ls -l /mnt/DVDs total 0 Link to comment
jbartlett Posted February 12, 2014 Share Posted February 12, 2014 Thanks for the good work I apologize for my short bus knowledge of linux. The command after mkdir shows [root@ArchApplianceVM_v3 ~]# ls /mnt/DVDs [root@ArchApplianceVM_v3 ~]# Hey - you figured out how to use the CODE button, there's hope for you still. The place for the mount exists, what are the current contents of your /etc/fstab file? You can type in "/cat /etc/fstab" instead of viewing in nano. What is a working share location in Windows Explorer? Link to comment
jbartlett Posted February 12, 2014 Share Posted February 12, 2014 I swear, I need to create a link to nano because I can't seem to NOT type "nemo" instead. Link to comment
HAVOC Posted February 12, 2014 Share Posted February 12, 2014 Thanks for the good work I apologize for my short bus knowledge of linux. The command after mkdir shows [root@ArchApplianceVM_v3 ~]# ls /mnt/DVDs [root@ArchApplianceVM_v3 ~]# Hey - you figured out how to use the CODE button, there's hope for you still. The place for the mount exists, what are the current contents of your /etc/fstab file? You can type in "/cat /etc/fstab" instead of viewing in nano. What is a working share location in Windows Explorer? LOL I try hard coach: [root@ArchApplianceVM_v3 ~]# cat /etc/fstab # # /etc/fstab: static file system information # # <file system> <dir> <type> <options> <dump> <pass> #//tower/DVDs /mnt/DVDs cifs noauto,x-systemd.automount,ro,username=nobody,password=,_netdev 0 0 # /dev/xvda1 UUID=93ec2c22-36c1-487c-a888-adde602a16fe / ext4 rw, relatime,data=ordered 0 1 Index of \\tower\dvds\ Name Size Date Modified [parent directory] BLURAY/ 2/12/14 3:42:17 AM Original/ 2/11/14 9:23:38 AM TV/ 7/6/11 11:42:26 AM Link to comment
ironicbadger Posted February 12, 2014 Author Share Posted February 12, 2014 # at the start ofa line is a comment and that line is therefore ignored. Remove it and try again. Sent from my Nexus 5 using Tapatalk Link to comment
HAVOC Posted February 12, 2014 Share Posted February 12, 2014 Okay so remove the # sign? [root@ArchApplianceVM_v3 ~]# ls -l /mnt/DVDs total 4 drwxr-xr-x 2 root root 4096 Feb 12 23:21 BLURAY Link to comment
jbartlett Posted February 13, 2014 Share Posted February 13, 2014 Index of \\tower\dvds\ Name Size Date Modified [parent directory] BLURAY/ 2/12/14 3:42:17 AM Original/ 2/11/14 9:23:38 AM TV/ 7/6/11 11:42:26 AM Once you get the mount working, here's a modification to the paths you should enter into Plex - run through the process twice, once for each. I believe if you type "Movies" twice, it combines the contents into the same section - or you can create two sections, one for BluRay and one for DVD (assuming that's for original) /mnt/DVDs/BLURAY /mnt/DVDs/Original Then add a new section clicking on the TV icon and enter /mnt/DVDs/TV Link to comment
Recommended Posts