So, My server has been up and running for quite a month or two now and I decided it was time to try and get the sleep function working.  I started with this Wiki:

 

http://lime-technology.com/wiki/index.php/Setup_Sleep_%28S3%29_and_Wake_on_Lan_%28WOL%29

 

but when I stopped my array, put it to sleep and sent the magic packet, the lights and fans came on, but nothing else seemed to come up.  I couldn't telnet, the monitor didn't come up, nothing.  I had to use the reset button to get it to reboot. 

 

I did some searching and the only thing I can seem to find is a few people asking the same thing but not much in the way of solutions.  I did find that older versions of unraid don't fully support the Realtek 8111e network cards but that is supposed to be resolved in the latest release version, or so I think. 

 

Anybody have any suggestions on where to go from here?  Thanks.

 

Specs below:

 

SV/Sab/CP/Transmission

unMenu

Dynamix

 

unRAID Version: unRAID Server Plus, Version 5.0.4

Motherboard: Gigabyte Technology Co., Ltd. - GA-A75M-S2V

Processor: AMD A4-3300 APU with Radeon HD Graphics - 2.5 GHz

Cache: Internal Cache = 128 kB (max. 128 kB)

Internal Cache = 128 kB (max. 128 kB)

External Cache = 512 kB (max. 512 kB)

Memory: 8192 Module (max. 16 GB)

Bank0/1 = 4096 MB, 1066 MHz

Bank2/3 = 4096 MB, 1066 MHz

Bank4/5 = No Module Installed, 1066 MHz

Bank6/7 = No Module Installed, 1066 MHz

Network: eth0: 1000Mb/s - Full Duplex

Is your array coming up?

Any hard disk activity?

 

Check this thread.

I have hammered myself a version of this script and it seems to work pretty well for me.

There is a function post_sleep_activity that will set your NIC to GB and force a DCHP renewal.

Perhaps that solves your accessibility issue through the LAN.

 

I can vaguely remember reading about a graphics adapter issue somewhere in here.

Maybe something similar is necessary to reset the graphics?

 

I need to test my version of the auto_s3_sleep.sh because I reworked some passages and

had no time to test it.

The version linked above lacks a functioning ip ping and the lockfile setting.

 

Edit: added the link about the graphics adapter