Hi,

 

Did a parity check and got 1375 errors on my Parity drive all of them being this with different sectors

 

3 05:31:39 Namek kernel: md: disk0 read error, sector=741867488 (Errors).

 

Ran a long smart and got this:

 

ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE

  1 Raw_Read_Error_Rate    0x002f  200  200  051    Pre-fail  Always      -      340

  3 Spin_Up_Time            0x0027  175  174  021    Pre-fail  Always      -      6216

  4 Start_Stop_Count        0x0032  100  100  000    Old_age  Always      -      165

  5 Reallocated_Sector_Ct  0x0033  200  200  140    Pre-fail  Always      -      0

  7 Seek_Error_Rate        0x002e  200  200  000    Old_age  Always      -      0

  9 Power_On_Hours          0x0032  095  095  000    Old_age  Always      -      4061

10 Spin_Retry_Count        0x0032  100  100  000    Old_age  Always      -      0

11 Calibration_Retry_Count 0x0032  100  253  000    Old_age  Always      -      0

12 Power_Cycle_Count      0x0032  100  100  000    Old_age  Always      -      12

192 Power-Off_Retract_Count 0x0032  200  200  000    Old_age  Always      -      3

193 Load_Cycle_Count        0x0032  200  200  000    Old_age  Always      -      161

194 Temperature_Celsius    0x0022  125  109  000    Old_age  Always      -      25

196 Reallocated_Event_Count 0x0032  200  200  000    Old_age  Always      -      0

197 Current_Pending_Sector  0x0032  200  200  000    Old_age  Always      -      0

198 Offline_Uncorrectable  0x0030  100  253  000    Old_age  Offline      -      0

199 UDMA_CRC_Error_Count    0x0032  200  200  000    Old_age  Always      -      0

200 Multi_Zone_Error_Rate  0x0008  200  200  000    Old_age  Offline      -      16

 

SMART Error Log Version: 1

No Errors Logged

 

SMART Self-test log structure revision number 1

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error

# 1  Extended offline    Completed: read failure      80%      4051        1088798792

# 2  Short offline      Completed without error      00%      4050        -

 

 

My question is, it looks like there are no sectors pending relocation, so I should be able to do a preclear and re-add the drive or does the drive need to be RMA'd. It's under a year old.

 

Thanks!

 

Edit: Had to trim the top of my syslog for it to fit within the max size.

syslog-2014-03-03.txt

The self-test failed. You can try a pre-clear and then run the long test again. Or just RMA.

The self-test failed. You can try a pre-clear and then run the long test again. Or just RMA.

 

Thanks, I'll RMA the drive.