PhAzE Posted April 20, 2015 Author Share Posted April 20, 2015 I'm not sure about your first question because I don't use that app myself, but your second question, if it is a subdirectory of the install directory and called library then it is the default directory which is why the tick disappears. In other words, you are setting it to the directory it defaults to already. Quote Link to comment
jevans04 Posted April 20, 2015 Share Posted April 20, 2015 Any chance of getting a PlexWatch plugin? I was looking into installing it with docker, but that doesn't actually work unless you are running Plex in a docker as well apparently. I have everything set up in Unraid6 with your plugin, so I want to avoid swapping Plex to a docker, but Plexwatch is making that tempting. FYI, I run PlexWatch in a docker, and I run Plex Server using Phaze's plugin. Quote Link to comment
Mailman74 Posted April 20, 2015 Share Posted April 20, 2015 I keep getting an Autentication required pop up and its asking for user name and pw for sabnzbd. I have never set it up with a user name and pw. Quote Link to comment
ars92 Posted April 24, 2015 Share Posted April 24, 2015 Just wanted to say,the plugins im running are all running fine on 6b15 Quote Link to comment
PhAzE Posted April 24, 2015 Author Share Posted April 24, 2015 Awesome, I didn't even notice a new version was out. I'm going to update them soon to fix the install error that shows up on unraid 5, now that I've seen a way to resolve that. Quote Link to comment
xtrips Posted April 24, 2015 Share Posted April 24, 2015 Hello, No matter how I do it and how many times I do it the Sabnzbd config path keeps disappearing and the config checkbox keeps unchecking itself. When check the checkbox and provide a path for Sabnzbd config in my cache drive and then press apply, it does save the config and all is fine, until the next restart or whatever. Then Sabnzbd loads up without config, starting with the Welcome page etc... But it keeps all the other mappings to the cache drive (admin, logs, etc...), same thing for the other PhAze plugins installed. The only one that is not persistent is the Sabnzbd config path. BTW I am running v.6 b15. What should I look for? Quote Link to comment
roland Posted April 24, 2015 Share Posted April 24, 2015 I just want to say a big THANK YOU! I have just upgraded my V5 tower to V6b15. Following the instructions on the wiki I did not bring across any plugins and started with a clean setup. Then I installed your plugins and just copy/pasted the correct settings from my backup of your cfg files to the gui and everything just worked again!! The only thing not working is rsync as it was not a pluging. (Hint) Thanks a lot, beer is on its way! edit: these are the plugins I use Plex, Filebot, FlexGet, Transmission Quote Link to comment
ruthlessone Posted April 25, 2015 Share Posted April 25, 2015 Greetings PhAzE and other Xspertz, getting this when trying to install Sonarr.. Tried pasting link in and downloading the file. I am running Unraid 6b15 Thanks! plugin: installing: https://github.com/PhAzE-Variance/unRAID/raw/master/Plugins/Sonarr.plg plugin: downloading https://github.com/PhAzE-Variance/unRAID/raw/master/Plugins/Sonarr.plg plugin: downloading: /tmp/plugins/Sonarr.plg ... done Cleaning up previous install files... ...Cleanup complete! Downloading any missing plugin files... Latest plugin control files downloading ...Unable to download missing plugin control files. Aborting install plugin: run failed: /bin/bash retval: 1 Quote Link to comment
PhAzE Posted April 25, 2015 Author Share Posted April 25, 2015 DNS, some locations have issue downloading from github. Try temporarily changing your DNS to 8.8.8.8 and see if it installs. After its installed you can put your DNS back. Quote Link to comment
ruthlessone Posted April 25, 2015 Share Posted April 25, 2015 Will do. Ill let you know if the issue persists. Quote Link to comment
VieuxCrabe Posted April 26, 2015 Share Posted April 26, 2015 Hey Phaze, any chance you will be updating PlexConnect to make it use the iMove or Wall Street Journal App? No hurry just wondering if you are going to look at it and when it might happen. Thanks for the great work I will have a look likely later this week. Can you tell me what needs to be done, like is it just the. Pem name that needs updating? Right now it forces trailers.pem Hi, Don't know if this was answered or not. Basically, it would be perfect if the plugin DID NOT force trailers.pem Once the app and certificate are set, there is no need to force anything on each upgrade. My settings.cfg is set like this: hosttointercept = secure.marketwatch.com certfile = /mnt/cache/apps/Plexconnect/config/certificates/wsjapp.pem But on each upgrade it ends up like this: hosttointercept = secure.marketwatch.com certfile = /mnt/cache/apps/Plexconnect/config/certificates/trailers.pem So I need to stop Plexconnect, edit the setting and restart Plexconnect after a plugin update. No biggie, but it would be nice it it didn't force the certificate name Thanks for all the work! Quote Link to comment
CyberMew Posted April 27, 2015 Share Posted April 27, 2015 What does it mean if I'm getting this while trying to install couchpotato? installing plugin: Couchpotato file /tmp/Couchpotato-script: successfully wrote INLINE file contents /bin/bash /tmp/Couchpotato-script ... Cleaning up previous install files... ...Cleanup complete! Downloading any missing plugin files... Latest plugin control files downloading Plugin control files have passed MD5 check Latest plugin dependency files downloading Plugin dependency files have passed MD5 check ...Downloading complete! Running install script for CouchPotato... No default config file found. Creating Plugin config file verified Installing plugin control files Installing plugin dependency files +============================================================================== | Skipping package curl-7.21.4-i486-1 (already installed) +============================================================================== +============================================================================== | Skipping package git-1.7.4.4-i486-1 (already installed) +============================================================================== +============================================================================== | Skipping package libffi-3.0.11-i486-1sl (already installed) +============================================================================== +============================================================================== | Skipping package libidn-1.19-i486-1 (already installed) +============================================================================== +============================================================================== | Skipping package python-2.7.3-i686-5PTr (already installed) +============================================================================== +============================================================================== | Skipping package sqlite-3.7.5-i486-1 (already installed) +============================================================================== +============================================================================== | Skipping package zlib-1.2.5-i486-4 (already installed) +============================================================================== Updating export file No application config file was located or created. Cleaning up temp files/folders ...Install complete! success file : unable to create directory Quote Link to comment
PhAzE Posted April 27, 2015 Author Share Posted April 27, 2015 Can be ignored on unraid 5 Quote Link to comment
net2wire Posted April 27, 2015 Share Posted April 27, 2015 Have been getting this error in Sickbeard. AASSLError: The read operation timed out AA return self._sslobj.read(len) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/ssl.py", line 160, in read AA return self.read(buflen) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/ssl.py", line 241, in recv AA data = self._sock.recv(self._rbufsize) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/socket.py", line 476, in readline AA line = self.fp.readline(_MAXLINE + 1) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/httplib.py", line 365, in _read_status AA version, status, reason = self._read_status() AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/httplib.py", line 409, in begin AA response.begin() AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/httplib.py", line 1045, in getresponse AA r = h.getresponse(buffering=True) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/urllib2.py", line 1187, in do_open AA return self.do_open(httplib.HTTPSConnection, req) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/urllib2.py", line 1222, in https_open AA result = func(*args) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/urllib2.py", line 382, in _call_chain AA '_open', req) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/urllib2.py", line 422, in _open AA response = self._open(req, data) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/urllib2.py", line 404, in open AA usock = opener.open(url, post_data) AA File "/usr/local/sickbeard/sickbeard/helpers.py", line 181, in getURL Still looking around for additional info but could this be an issue with the search provider? Quote Link to comment
Nubi Posted April 29, 2015 Share Posted April 29, 2015 I am struggling with probably the most basic issue. I installed Sabnzbd and it is setup and running fine, I just dont know where it is putting stuff. I see its folder location of "/usr/local/sabnzbd/config/Downloads/complete" but where is that? Quote Link to comment
ars92 Posted April 29, 2015 Share Posted April 29, 2015 Replace /usr/local/ with /mnt/user/apps/ You will be then be able to see it in your file explorer Quote Link to comment
Nubi Posted April 29, 2015 Share Posted April 29, 2015 Do you mean to make that change to my designated download folder in sab? Quote Link to comment
trurl Posted April 29, 2015 Share Posted April 29, 2015 I am struggling with probably the most basic issue. I installed Sabnzbd and it is setup and running fine, I just dont know where it is putting stuff. I see its folder location of "/usr/local/sabnzbd/config/Downloads/complete" but where is that? That location is in RAM and will not survive a reboot. You haven't configured the plugin corrrectly. You need to make it use something in /mnt. Post a screenshot of your plugin page (or just look through the thread for other examples). Quote Link to comment
PhAzE Posted April 29, 2015 Author Share Posted April 29, 2015 I am struggling with probably the most basic issue. I installed Sabnzbd and it is setup and running fine, I just dont know where it is putting stuff. I see its folder location of "/usr/local/sabnzbd/config/Downloads/complete" but where is that? That's in ram so when you reboot your will lose your files. On the plugin change the config directory to /mnt/cache/.appconfigs/sabnzbd Assuming you have a cache drive other wise move it onto your array instead. Then in the program you can set your download directory to somewhere else or leave it at the default. Quote Link to comment
PhAzE Posted April 29, 2015 Author Share Posted April 29, 2015 Have been getting this error in Sickbeard. AASSLError: The read operation timed out AA return self._sslobj.read(len) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/ssl.py", line 160, in read AA return self.read(buflen) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/ssl.py", line 241, in recv AA data = self._sock.recv(self._rbufsize) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/socket.py", line 476, in readline AA line = self.fp.readline(_MAXLINE + 1) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/httplib.py", line 365, in _read_status AA version, status, reason = self._read_status() AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/httplib.py", line 409, in begin AA response.begin() AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/httplib.py", line 1045, in getresponse AA r = h.getresponse(buffering=True) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/urllib2.py", line 1187, in do_open AA return self.do_open(httplib.HTTPSConnection, req) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/urllib2.py", line 1222, in https_open AA result = func(*args) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/urllib2.py", line 382, in _call_chain AA '_open', req) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/urllib2.py", line 422, in _open AA response = self._open(req, data) AA File "/usr/local/PhAzE-Common/usr/lib64/python2.7/urllib2.py", line 404, in open AA usock = opener.open(url, post_data) AA File "/usr/local/sickbeard/sickbeard/helpers.py", line 181, in getURL Still looking around for additional info but could this be an issue with the search provider? I'm not sure about this but definitely a problem with SSL. I know done sites/indexers have updated to tlsv1.2 and some apps are not compatible. For example, nzbgeek did that and doesn't work with sonarr or any mono based apps until mono gets tlsv1.2 support. Quote Link to comment
Nubi Posted April 29, 2015 Share Posted April 29, 2015 Thanks! That cleared up my confusion. All is well now. Thanks everyone for helping. Quote Link to comment
philroussel Posted May 1, 2015 Share Posted May 1, 2015 I have installed the new Plex Media Server version yesterday (version 0.9.12.0) and it seems that there is a bug in the transcoder or whatever engine Plex uses to play movies. My latest Blu-Ray movie, Unbroken, ripped with Handbrake, is very pixelated in motion sequences. It's just an example, same thing for all my movies. I have no doubt there will be a patch in the future. Here comes my question: I am running the latest unRAID version 6.0.beta15, and the Plex plugin ( PhAzE) is updated automatically. How do I reverse to the previous Plex version? I have tried to re-install the previous version on the USB boot key in /boot/packages , but the new version automatically downloads and replaces it at boot. Quote Link to comment
PhAzE Posted May 1, 2015 Author Share Posted May 1, 2015 I have installed the new Plex Media Server version yesterday (version 0.9.12.0) and it seems that there is a bug in the transcoder or whatever engine Plex uses to play movies. My latest Blu-Ray movie, Unbroken, ripped with Handbrake, is very pixelated in motion sequences. It's just an example, same thing for all my movies. I have no doubt there will be a patch in the future. Here comes my question: I am running the latest unRAID version 6.0.beta15, and the Plex plugin ( PhAzE) is updated automatically. How do I reverse to the previous Plex version? I have tried to re-install the previous version on the USB boot key in /boot/packages , but the new version automatically downloads and replaces it at boot. You will need to unplug your Ethernet on boot to prevent the newer version from downloading. Or replace replace the file with the old one, using the newer name and delete the md5 then run /etc/rc.d/rc.Plexmediaserver install (with your ethernet unplugged). Quote Link to comment
philroussel Posted May 2, 2015 Share Posted May 2, 2015 Thank you PhAzE. I did copy the old version along with the new version in /boot/packages on the flash key. Renamed the old one with the new name, removed the new version, I have never found the md5 file so didn't do anything on this, then rebooted . I worked. This fooled the autoloading of the new version. Still I would wish that it was more simple and that the auto-install of new version could be disabled. Any way, you earned your beer Thanks. PS: it just proved that the new Plex version (0.9.12) is buggy. The old version (0.9.11.16) works fine. Quote Link to comment
PhAzE Posted May 2, 2015 Author Share Posted May 2, 2015 You may be using the v1 plugin because the v2 plugins no longer use that folder. Glad it worked on the v1 plugin also. I will look, at some point, to adding an option to install from USB instead of the internet. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.