PhAzE Posted June 7, 2015 Author Share Posted June 7, 2015 Untested but looking at the cjamgelog, if it worked on rc3 it should work on rc4 also. Quote Link to comment
Esse Posted June 7, 2015 Share Posted June 7, 2015 Confirmed, it works Thx P! /E Quote Link to comment
Njon Posted June 8, 2015 Share Posted June 8, 2015 phaze, i'm sorry but could you please ad lxml to your plugin? I'm not able to make it work. Also other torrent provider in couch use it, so it would be useful if you include it in your installation. Thank you Quote Link to comment
gundamguy Posted June 9, 2015 Share Posted June 9, 2015 Had an odd problem just now. Plex shutdown when I tried to sync stuff to my Ipad... and then I found this in my log. Jun 4 22:46:38 Argama kernel: Plex Media Serv[3771]: segfault at 0 ip 00000000008c4f79 sp 00007f3e497fe9b0 error 4 in Plex Media Server[400000+843000 Is this an issue with the new version of Plex [0.9.12.3.1173-937aac3], or is something else causing problem. Definitely a Plex error, not plugin related. I assumed so. Not really been able to recreate it so... hope it gets squashed in the next update. Quote Link to comment
FredG89 Posted June 12, 2015 Share Posted June 12, 2015 Phaze. I know I asked you about this before, but is there a way to make this compatiable with unraid? When trying to use it as a custom repo, it fails to install...I'm guessing because it's not a plugin? https://github.com/hernandito/Maraschino-Portal Quote Link to comment
redfro Posted June 13, 2015 Share Posted June 13, 2015 Hey, Phaze. First of all, thanks for all your hard work! I couldn't have set up my server without your great plugins. Now for the inevitable request: Could you make a Ubooquity plugin? I'm running 5.0.6 and a plugin for Ubooquity would make my life complete. Again, thanks for all the work you do! Quote Link to comment
FredG89 Posted June 14, 2015 Share Posted June 14, 2015 Hey, Phaze. First of all, thanks for all your hard work! I couldn't have set up my server without your great plugins. Now for the inevitable request: Could you make a Ubooquity plugin? I'm running 5.0.6 and a plugin for Ubooquity would make my life complete. Again, thanks for all the work you do! This can be accomplished in emby. Quote Link to comment
redfro Posted June 14, 2015 Share Posted June 14, 2015 Hey, Phaze. First of all, thanks for all your hard work! I couldn't have set up my server without your great plugins. Now for the inevitable request: Could you make a Ubooquity plugin? I'm running 5.0.6 and a plugin for Ubooquity would make my life complete. Again, thanks for all the work you do! This can be accomplished in emby. Really? I thought Emby was a Plex like server, and while you can view books and comics you have to do a bunch of stuff to make it work. So Emby can be used as a comic reader? Quote Link to comment
chvb Posted June 15, 2015 Share Posted June 15, 2015 Hey, Phaze. First of all, thanks for all your hard work! I couldn't have set up my server without your great plugins. Now for the inevitable request: Could you make a Ubooquity plugin? I'm running 5.0.6 and a plugin for Ubooquity would make my life complete. Again, thanks for all the work you do! This can be accomplished in emby. Really? I thought Emby was a Plex like server, and while you can view books and comics you have to do a bunch of stuff to make it work. So Emby can be used as a comic reader? No, i don't think Emby is the right app for this. Quote Link to comment
PhAzE Posted June 15, 2015 Author Share Posted June 15, 2015 I'll look into ubooquity later this week, I've been looking for some way to stream books and comics to my devices. Quote Link to comment
wickedathletes Posted June 15, 2015 Share Posted June 15, 2015 I'll look into ubooquity later this week, I've been looking for some way to stream books and comics to my devices. PhAzE, I was wondering if your awesome skill set could be used to work on a Plex Scripting plugin of sorts, something that runs various Plex Scripts that are python based. For example, two come to mind for my use and I am wondering if others would be interested in this as well, as oppose to making 1,2,10 etc individual plugins. PlexEmail: https://forums.plex.tv/index.php/topic/151619-plexemail-in-development/ Plex-Cleaner: https://github.com/ngovil21/Plex-Cleaner Quote Link to comment
ars92 Posted June 16, 2015 Share Posted June 16, 2015 Hi phaze, For those of us still on b15 with your plugins, its not safe to upgrade to 6.0 final right? Because of the python issue? Please correct me if im wrong. Quote Link to comment
micokeman Posted June 16, 2015 Share Posted June 16, 2015 Has anyone recently been able to install the Btsync plugin recently? I downloaded the file from post 1 and ran "/boot/config/plugins# install plg Btsync.plg". The BitTorrent Sync plugin configuration icon shows up under the unRaid setting. I configured the Install directory to: /mnt/cache/applications/btsync I attempted to configure the Config directory to: /mnt/cache/applications/btsync/config, but when I click apply, the field just blanks out. I am guessing that a blank field place the config files in the config folder of the path of the install location. I then attempted to install it. I get this error: /etc/rc.d/rc.Btsync install Installing BitTorrent Sync... Unable to get latest version from online, checking USB for any install file Failed to download or locate BitTorrent Sync install file. Aborting installation. Are file hosts really down??? Now, some trouble-shooting research prompted me to download the Btsync-PhAzE-1.4.110-i386.tar and Btsync-PhAzE-1.4.110-i386.tar.gz.md5, but that is an old version - which I did and got to work, but I need the 2.0 version since the current shares are using 2. I don't mind paying for the features, but I'd really like to get this to start working. ANY help would be MUCH appreciated. Side note: I did manage to get version 2 to work on my main UnRaid. Since the first server is working, I copied the btsync, LICENSE.TXT, and README files to the new server. This managed to show me that I have version 2 installed, but I couldn't get the service to start. It gave me a "PID not created, application did not start for some reason" error. I am not sure what that means. I guess a copy paste from server to server will not work. ANY help will be MUCH appreciated! A follow-up to this comment... I ended up installing the 1.4.110 version on both machines and have chosen to ignore update notices. It will take time to rebuild the index on the once 2.0 machine, but the older version seems stable. Lesson learned... be slow to update! Quote Link to comment
redfro Posted June 16, 2015 Share Posted June 16, 2015 I'll look into ubooquity later this week, I've been looking for some way to stream books and comics to my devices. Awesome! Again, thanks for all your hard work! Quote Link to comment
Tophicles Posted June 16, 2015 Share Posted June 16, 2015 Jun 16 18:10:58 Angband emhttp: Starting CouchPotato... Jun 16 18:10:59 Angband sudo: root : TTY=unknown ; PWD=/ ; USER=nobody ; COMMAND=/bin/bash -c . /usr/local/PhAzE-Common/Couchpotato/startcfg.sh; python /mnt/extra/64bit/install/potato/CouchPotato.py --data_dir /mnt/extra/64bit/conf/potato --daemon --pid_file /var/run/Couchpotato/Couchpotato.pid & Jun 16 18:11:10 Angband emhttp: PID not created, application did not start for some reason Jun 16 18:11:15 Angband emhttp: Starting Maraschino... Jun 16 18:11:16 Angband sudo: root : TTY=unknown ; PWD=/ ; USER=nobody ; COMMAND=/bin/bash -c . /usr/local/PhAzE-Common/Maraschino/startcfg.sh; python /mnt/extra/64bit/install/maraschino/Maraschino.py -d --port 7000 --webroot= --datadir=/mnt/extra/64bit/conf/maraschino --pidfile=/var/run/Maraschino/Maraschino.pid Jun 16 18:11:21 Angband emhttp: Starting Plex Media Server... Jun 16 18:11:22 Angband sudo: root : TTY=unknown ; PWD=/ ; USER=nobody ; COMMAND=/bin/bash -c . /usr/local/PhAzE-Common/Plexmediaserver/startcfg.sh; nohup /mnt/extra/64bit/install/plex/"Plex Media Server" > /dev/null 2>&1 & Jun 16 18:11:28 Angband emhttp: Starting SABnzbd... Jun 16 18:11:29 Angband sudo: root : TTY=unknown ; PWD=/ ; USER=nobody ; COMMAND=/bin/bash -c . /usr/local/PhAzE-Common/Sabnzbd/startcfg.sh; python /mnt/extra/64bit/install/sab/SABnzbd.py -d -s 0.0.0.0:8081 --config-file /mnt/extra/64bit/conf/sab --pidfile /var/run/Sabnzbd/Sabnzbd.pid & Jun 16 18:11:32 Angband emhttp: Starting Sick Beard... Jun 16 18:11:33 Angband sudo: root : TTY=unknown ; PWD=/ ; USER=nobody ; COMMAND=/bin/bash -c . /usr/local/PhAzE-Common/Sickbeard/startcfg.sh; python /mnt/extra/64bit/install/sickbeard/SickBeard.py --daemon --forceupdate --port 8082 --datadir /mnt/extra/64bit/conf/sickbeard --pidfile /var/run/Sickbeard/Sickbeard.pid > /dev/null 2>&1 & Jun 16 18:11:44 Angband emhttp: PID not created, application did not start for some reason Just started getting these "PID not created" errors on the SickBeard and Couchpotato plugins. The thing is, they *do* start properly and run properly. When I shut the server down though, they "kill the process" rather than shutting it down. I'm assuming this is because it cannot find the PID files. Any idea what might be causing this? Quote Link to comment
Njon Posted June 17, 2015 Share Posted June 17, 2015 Phaze I'm sorry, but surfing on the web I found some instruction to install lxml on ubuntu. pkg install py27-lxml (Required) pkg install libxslt (Needs latest) pkg install libxml2 (Needs latest) py27-lxml is the same of what you install in the plugin? or is it a modified version to install lxml? Quote Link to comment
FredG89 Posted June 18, 2015 Share Posted June 18, 2015 Hey, Phaze. First of all, thanks for all your hard work! I couldn't have set up my server without your great plugins. Now for the inevitable request: Could you make a Ubooquity plugin? I'm running 5.0.6 and a plugin for Ubooquity would make my life complete. Again, thanks for all the work you do! This can be accomplished in emby. Really? I thought Emby was a Plex like server, and while you can view books and comics you have to do a bunch of stuff to make it work. So Emby can be used as a comic reader? No, i don't think Emby is the right app for this. So I'm guessing the app "Streams" the comic books in real-time. Emby just allows you to download it to your phone from anywhere. Meh, works for me. I have comic-rack as my reader. Quote Link to comment
mithrandir86 Posted June 18, 2015 Share Posted June 18, 2015 Today I got back from vacation to find that BTN has switched their SSL (like many have recently) and now I get errors like this everywhere in Sickrage (a fork of Sickbeard): Connection error [Errno bad handshake] [('SSL routines', 'SSL23_GET_SERVER_HELLO', 'sslv3 alert handshake failure')] while loading URL Apparently this is a problem with plugin's version of python: You have pyOpenSSL > v0.13.1 and do not have the Python cryptography module installed so you have no SNI, and are trying to access a site on shared hosting Your system OpenSSL version is less than 1.0.1 and you are trying to access a site using TLS1.1 or TLS1.2 The Sickrage devs go on to suggest some fixes, but I have no idea how to downgrade certain segments of python in unraid or install a python cryptography module. Quote Link to comment
PhAzE Posted June 18, 2015 Author Share Posted June 18, 2015 Thanks for the info, I've been dealing with the loss off my family member this week but I'll note this so when I update everything for unraid 6 final, I can hopefully cover all the bases. Quote Link to comment
mithrandir86 Posted June 18, 2015 Share Posted June 18, 2015 Thanks for the info, I've been dealing with the loss off my family member this week but I'll note this so when I update everything for unraid 6 final, I can hopefully cover all the bases. I'm sorry for your loss. Obviously this event is far more important. Quote Link to comment
DaveHavok Posted June 20, 2015 Share Posted June 20, 2015 Thanks for the info, I've been dealing with the loss off my family member this week but I'll note this so when I update everything for unraid 6 final, I can hopefully cover all the bases. I wanted to say thank you for your time and efforts, and my condolences for your loss. I looked into ubooquity as I too am looking for a method to stream my ebooks/comics to myself and others with access, and it looks very interesting. Quote Link to comment
PhAzE Posted June 22, 2015 Author Share Posted June 22, 2015 Ok, with the failure of another seagate hard drive, i lost my test VMs and the OS also. I have now managed to finally get the vms setup again for unraid 5 and 6. I will start this week testing out the plugins with Unraid 6 final and get them updated. I am pretty sure most of them work already, as my dependency files already include python. I just need to verify that none of the python dependencies are missing. After they are updated, i'll see about compiling a newer python version to fix the ssl issues some app shave been seeing. Then i'll check out Ubooquity for comic streaming. Hopefully it won't take too long to work on this over the next two weeks or so. Quote Link to comment
Njon Posted June 22, 2015 Share Posted June 22, 2015 If you can include lxml you will do me and others a big favor! Thank you for your great work and my condolences for your loss. Quote Link to comment
switchman Posted June 22, 2015 Share Posted June 22, 2015 @PhAzE, Thank you for your work on these. I currently use four of your plugins and plan to to continue using them after upgrading to R6. My setup currently works and I don't plan on moving to a Docker solution anytime soon. Quote Link to comment
PhAzE Posted June 23, 2015 Author Share Posted June 23, 2015 Hey everyone, Looks like I'm not able to get a test vm built with unraid 6. It requires a trial key to be installed, so when i got one, it expired within 2 minutes one month and 2 minutes (lol). Anyways, the problem i'm having is i'm unable to assign drives with the trial key. I get a message saying "too many devices attached" but i only have 3 drives and the USB stick. Any suggestions? EDIT: Doing a 'new config' at least lets me assign the drives, but unfortunately, the USB cloned drive I require to get the VM to boot, counts as an attached device so I can't start the array. Closer though. I thought on unraid, if you assign three drives, and have extra ones attached, it just would ignore then unassigned drives. EDIT 2: Just read that it's a bug that needs addressing. Too many devices attached, unable to start array. Guess plugin production is on hold for now. EDIT 3: I removed the parity drive from the VM, lets me start now. No biggie I guess, I don't actually put anything on this VM but what a pain that an unused drive prevents the array from starting up. I suppose non-array drives now count as 'devices' and the trial lets you have 3 devices hooked up max. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.