GrantR Posted September 29, 2015 Share Posted September 29, 2015 Sab is giving me an error "URL Fetching failed; Server uses an untrusted HTTPS certificate" Issue is occurring on nzb download, the domain has a vaild trusted cert. Tried to disable enable_https_verification, will advise if this helps. Quote Link to comment
ashman70 Posted October 2, 2015 Share Posted October 2, 2015 Having an issue with Plex plugin for 6.1.3, it was working fine but now the movie posters don't show up no matter how many times I do a refresh or force refresh. Started, stopped Plex, uninstalled it, reinstalled it, doesn't help. Any ideas? Quote Link to comment
PhAzE Posted October 2, 2015 Author Share Posted October 2, 2015 Dlete cache folder for plex and have it re-download all the posters again. Quote Link to comment
ashman70 Posted October 2, 2015 Share Posted October 2, 2015 Thanks, is that done from the gui or cli? If cli what is the command? I have googled this and I can't figure it out, I'm not terribly good with linux so if its a command and the solution is in another thread, just point me there. Thanks Quote Link to comment
ashman70 Posted October 3, 2015 Share Posted October 3, 2015 Is anyone able to help me with this? I am unable to figure it out. Thanks Quote Link to comment
PhAzE Posted October 3, 2015 Author Share Posted October 3, 2015 Basically, you need to remove the files from the cache folder in your config folder. Can you access your config folder from windows, like did you make it a share or anything? In the plex gui there is an option to clear database and empty trash bin, you can try those too. Quote Link to comment
ashman70 Posted October 3, 2015 Share Posted October 3, 2015 Where do I find the config folder, is it on the boot (flash drive)? I can't seem to locate one anywhere else, and I've been into all the folders, can't see what I am supposed to delete. Doing those two things in Plex has not effect. I'm also experiencing others issues too, I'll go to unmatch a film and it will tell me there was a problem or I'll change a movie poster and it will tell me the changes could not be saved. Sorry for all the questions. Thanks Quote Link to comment
Baccata Posted October 3, 2015 Share Posted October 3, 2015 Hi, I've been reading posts for 2 hours and can't find a solution. I just moved to Unraid V6.1 and installed the phaze plex plugin. I am getting the two warnings below. Config directory will be created when you start the application] Config directory does not exist Transcode directory can bloat and fill your RAM which may cause system stability problems so it is recommended to locate this folder on a physical drive] Transcode directory located on RAM drive I have tried to change the directory settings but it won't let me and just defaults back to : /usr/local/Plexmediaserver/config /tmp/Plexmediaserver How do I fix this as whenever I re-boot, my entire library within plex gets wiped. Thanks Quote Link to comment
PhAzE Posted October 3, 2015 Author Share Posted October 3, 2015 Well it depends on where you set it in the plex plugin settings page. Under the title "library directory" Quote Link to comment
PhAzE Posted October 3, 2015 Author Share Posted October 3, 2015 Hi, I've been reading posts for 2 hours and can't find a solution. I just moved to Unraid V6.1 and installed the phaze plex plugin. I am getting the two warnings below. Config directory will be created when you start the application] Config directory does not exist Transcode directory can bloat and fill your RAM which may cause system stability problems so it is recommended to locate this folder on a physical drive] Transcode directory located on RAM drive I have tried to change the directory settings but it won't let me and just defaults back to : /usr/local/Plexmediaserver/config /tmp/Plexmediaserver How do I fix this as whenever I re-boot, my entire library within plex gets wiped. Thanks Try editing the config file in /boot/config/plugins/Plexmediacenter/Plexmediacenter.cfg Manually enter the paths and then just stop and start the app again. Quote Link to comment
Baccata Posted October 3, 2015 Share Posted October 3, 2015 awesome, worked like a charm. Thanks for the help! I put it here: /mnt/cache/appdata/plex hope that's a good spot for it. Quote Link to comment
Riot Posted October 3, 2015 Share Posted October 3, 2015 Meh - upgrade now works, but we're back to the problem of the root certificates being invalid again (and the previous patch no longer appears to work in 0.8.0) PhAzE - sorry to be a pain - but what do we have to do to figure out why the root certs aren't correct on 5.x So it should make it work for now (and indeed I have just updated through the plugin!!) - but we'll need to ask PhAzE nicely for a different approach in the future ;-) EDIT: And fixed it myself (at least temporarily) wget http://slackware.cs.utah.edu/pub/slackware/slackware-current/slackware/n/ca-certificates-20150426-noarch-2.txz installpkg ca-certificates-20150426-noarch-2.txz And I'm back to downloading again... Just FYI it's not just 8.0. Certs no longer work with 7.20 after upgrading plugin. I haven't tried that different certs package fix yet to verify if that fixes it. Quote Link to comment
ashman70 Posted October 3, 2015 Share Posted October 3, 2015 Ok so I from the CLI I have made it into the following directory: /usr/local/Plexmediaserver/config/Plex Media Server/cache and found a directory called PhotoTranscoder with a ton of numbered subdirectories, are these what I am supposed to delete? If so, what is the command from the CLI? Thanks AM Quote Link to comment
PhAzE Posted October 3, 2015 Author Share Posted October 3, 2015 rm -r /usr/local/Plexmediaserver/config/cache But after i suggest you change the library folder to somewhere on your cache drive or array. That folder erases on each reboot where you have it now. Quote Link to comment
ashman70 Posted October 4, 2015 Share Posted October 4, 2015 I have copied the path to disk 21, so the path should read: /mnt/disk21/usr/local/Plexmediaserver/config But when I try to change the path in plex setup in the gui, it wont accept it, what am I doing wrong? Quote Link to comment
Riot Posted October 4, 2015 Share Posted October 4, 2015 Updated SAB plugin rebooted Tested and verified it still wasn't grabbing the nzbs (getting wait fetching message) Ran: wget http://slackware.cs.utah.edu/pub/slackware/slackware-current/slackware/n/ca-certificates-20150426-noarch-2.txz installpkg ca-certificates-20150426-noarch-2.txz from command line in putty. Tried again and it still didn't work. Restarted SAB and still didn't work So unless there's an extra step in there that wasn't mentioned that I didn't do, that fix doesn't work for me. Correction: Downgraded plugin and it's not working. First time when I upgraded and it didn't work, I downgraded and it worked again. Now it's not. Only difference between first and last try was I installed those certs. Quote Link to comment
ashman70 Posted October 4, 2015 Share Posted October 4, 2015 Is anyone able to help me? This plex setup problem is driving me nuts, I am unable to change the path for the config/library setup in the webgui, is there another way? Quote Link to comment
trurl Posted October 4, 2015 Share Posted October 4, 2015 Is anyone able to help me? This plex setup problem is driving me nuts, I am unable to change the path for the config/library setup in the webgui, is there another way? Tools - Diagnostics. Post complete zip file. Quote Link to comment
PhAzE Posted October 4, 2015 Author Share Posted October 4, 2015 Updated SAB plugin rebooted Tested and verified it still wasn't grabbing the nzbs (getting wait fetching message) Ran: wget http://slackware.cs.utah.edu/pub/slackware/slackware-current/slackware/n/ca-certificates-20150426-noarch-2.txz installpkg ca-certificates-20150426-noarch-2.txz from command line in putty. Tried again and it still didn't work. Restarted SAB and still didn't work So unless there's an extra step in there that wasn't mentioned that I didn't do, that fix doesn't work for me. Correction: Downgraded plugin and it's not working. First time when I upgraded and it didn't work, I downgraded and it worked again. Now it's not. Only difference between first and last try was I installed those certs. That only downloads the file, you need to install it after with: Upgradepkg --install-new /path/to/file.txz Quote Link to comment
ashman70 Posted October 4, 2015 Share Posted October 4, 2015 Here is the diagnostic file as requested. Thank you. AM https://www.dropbox.com/s/p8fmuqoeex9fv8j/tower-diagnostics-20151004-1234.zip?dl=0 Quote Link to comment
Riot Posted October 4, 2015 Share Posted October 4, 2015 That only downloads the file, you need to install it after with: Upgradepkg --install-new /path/to/file.txz Thought that's what: installpkg ca-certificates-20150426-noarch-2.txz did? Ran: wget http://slackware.cs.utah.edu/pub/slackware/slackware-current/slackware/n/ca-certificates-20150426-noarch-2.txz installpkg ca-certificates-20150426-noarch-2.txz upgradepkg --install-new ca-certificates-20150426-noarch-2.txz And got the message: Skipping package ca-certificates-20150426-noarch-2 (already installed) Rebooted with old 2015.07.28.1 plugin still installed Verified still not working as is and just ran: wget http://slackware.cs.utah.edu/pub/slackware/slackware-current/slackware/n/ca-certificates-20150426-noarch-2.txz upgradepkg --install-new ca-certificates-20150426-noarch-2.txz Still can't fetch nzbs Updated to 2015.09.11.1 plugin rebooted Verfied still not working as is ran wget http://slackware.cs.utah.edu/pub/slackware/slackware-current/slackware/n/ca-certificates-20150426-noarch-2.txz upgradepkg --install-new ca-certificates-20150426-noarch-2.txz Not fetching nzbs Any idea why it went back to working after the first time I upgraded, found it broken then downgraded but won't work after after downgrading now? Quote Link to comment
Riot Posted October 4, 2015 Share Posted October 4, 2015 Ok so I think have something new I'm running the following phaze plugins: sabnzb sickbeard sickbeardalt transmission When I updated I updated to 2015.09.11.1 for all When Sabnzbd wasn't working I just downgrade it to 2015.07.28.1 but left the rest upgraded. That got it back working the first time. Then upgraded Sabnzbd again to test that cert fix, it didn't work, downgraded then still didn't work etc. That whole time I still had the other plugins on 2015.09.11.1 Went all the way back to 2015.05.03.1 before the new python package for Sabnzbd while others were still on 2015.09.11.1 That worked even though it showed the dependency as the new python package (2.7.10 instead of 2.7.3 that it comes with) Then upgraded just sabnzbd to 2015.07.28 Didn't work again Downgraded all plugins to 2015.07.28 Now Sabnzbd fetches nzbs again while on 2015.07.28 Quote Link to comment
talkto_menow Posted October 4, 2015 Share Posted October 4, 2015 I have problem with post-processing files in Headphones. Everything works up to certain point. Nzb is sent to SAB and downloaded, FLAC files are converted to mp3 using ffmpeg and log files shows that post-processing is completed. I did specify in Headphones settings that files should be moved form cache drive (/mnt/cache/ready/music) to folders mp3 --> /mnt/user/Media/Audio/Mp3 and flac --> /mnt/user/Media/Audio/Flac but nothing happens. Headphones plugin is installed for user nobody, but I tried also root user and I got the same results Any ideas what might be causing this problem? Quote Link to comment
yp_1 Posted October 5, 2015 Share Posted October 5, 2015 Is anyone able to help me? This plex setup problem is driving me nuts, I am unable to change the path for the config/library setup in the webgui, is there another way? Below is my workaround. Leave the settings in the gui as they are. Replace /mnt/user/plugins/Plexmediaserver with your own path if you wish. mkdir -p /mnt/user/plugins/Plexmediaserver/tmp chmod 1777 /mnt/user/plugins/Plexmediaserver/tmp cp -Rp /usr/local/Plexmediaserver/config /mnt/user/plugins/Plexmediaserver cat >>/boot/config/go <<EOF [ -d /usr/local/Plexmediaserver ] || mkdir /usr/local/Plexmediaserver ln -s /mnt/user/plugins/Plexmediaserver/config /usr/local/Plexmediaserver [ -d /tmp/Plexmediaserver ] && rmdir /tmp/Plexmediaserver ln -s /mnt/user/plugins/Plexmediaserver/tmp /tmp/Plexmediaserver EOF Hope this helps. Quote Link to comment
PhAzE Posted October 5, 2015 Author Share Posted October 5, 2015 I have just updated 15 of the plugins to use the certificate package mentioned a few posts back. Hopefully that will resolve the certificate issues some people were having. Make sure to update all of my plugins that show an update, then reboot your server. That will clear out the old certificate store, and only the new one will be installed. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.