PhAzE Posted October 25, 2015 Author Share Posted October 25, 2015 Try this: chmod -R 777 /boot/config/plugins/Plexmediaserver It's case sensitive. Quote Link to comment
kitwolf Posted October 26, 2015 Share Posted October 26, 2015 Try this: chmod -R 777 /boot/config/plugins/Plexmediaserver It's case sensitive. Made absolutely no difference all files and folders are 777 full write / read. Pretty stumped. Quote Link to comment
PhAzE Posted October 26, 2015 Author Share Posted October 26, 2015 OK for now edit the entries in /boot/config/plugins/Plexmediaserver/Plexmediaserver.cfg manually using a text editor like mcedit. Then refresh the plugin settings page. Quote Link to comment
kitwolf Posted October 26, 2015 Share Posted October 26, 2015 OK for now edit the entries in /boot/config/plugins/Plexmediaserver/Plexmediaserver.cfg manually using a text editor like mcedit. Then refresh the plugin settings page. That worked! Thank you! Quote Link to comment
finchyboyz Posted October 26, 2015 Share Posted October 26, 2015 Are you on unraid 5 and using dynamix? If so, the issue won't be fixed until im back from vacation. HI Phaze I managed to get up and running again in a sort of fashion, im now running Installed Version: 0.9.12.11.1406-8403350 of Plex but its a little flaky. I have a lot of stops and starts during play back and it goes back to the loading screen, sometimes it will just sit there waiting. I also lost Sonnar but have since recovered that, as i said something funky happened when i updated the plex client. running unraid 5.0.5 with dynamix as per your email. regards Bob Quote Link to comment
rcrh Posted October 27, 2015 Share Posted October 27, 2015 I have a problem with the gui interface to the plugins. I'm running unRaid 5.0.6. From the setting tab if I select any of the pluggins I get a page that has the limetech menus & a single grey box with the icon of the plugin. I have to click that box to get to the page for the plugin. However the really problem is what happens next. After clicking, say SABnzbd, its page loads but with a cube of blue boxes that rotate (indicating a "wait" function??). At this point nothing happens. None of the buttons on the page load. This means that while updating a plugin I can't START it. Quote Link to comment
RobJ Posted October 27, 2015 Share Posted October 27, 2015 I have a problem with the gui interface to the plugins. I'm running unRaid 5.0.6. We interrupt this fine program with a message from your sponsors! We STRONGLY RECOMMEND upgrading to the latest v6! * ALL versions prior to the current v6 have known security vulnerabilities, making them vulnerable to attack by an infected machine on your local network. * LimeTech has been seriously considering for some time moving ALL older versions to End-Of-Life, all versions prior to v6. * Maintenance and support is becoming harder and scarcer as time goes by. There are fewer and fewer people familiar with your version able or willing to help. * Numerous bugs have been fixed. You may be running without issue now, but something can still go wrong, or you may try something different, and run into an issue long fixed in newer versions. * You're missing out on a lot of new features, and perhaps better performance too. * After upgrading, you will still be able to run all of your favorite PhAzE plugins! And they may even run better! Or you may find alternative ways to run your favorite applications, that work better in your environment. Why not check out the Upgrading to UnRAID v6 guide? Now back to your fine and very long running program (169 pages of it)! (Apologies to PhAzE for this interruption!) Quote Link to comment
impalerware Posted October 28, 2015 Share Posted October 28, 2015 Is anybody else's custom port keep getting turned off in the plex plugin after every plex restart or update? Quote Link to comment
rcrh Posted October 28, 2015 Share Posted October 28, 2015 I have a problem with the gui interface to the plugins. I'm running unRaid 5.0.6. We interrupt this fine program with a message from your sponsors! All right all right all right. I bit the bullet and did the upgrade. happy now? Quote Link to comment
RobJ Posted October 29, 2015 Share Posted October 29, 2015 I have a problem with the gui interface to the plugins. I'm running unRaid 5.0.6. We interrupt this fine program with a message from your sponsors! All right all right all right. I bit the bullet and did the upgrade. happy now? Yay!!! Quote Link to comment
truetype Posted October 30, 2015 Share Posted October 30, 2015 Hey I am running the newest unRAID 6.1.3 I just installed the plexmediaserver.plg, then I head over to settings and enter the app by clicking the icon. I type in as I want to set up plex but when I hit apply the site just refreshes but nothing changes??? Please help me... What to do? Change permissions? How do I change those? How do I run commands? I am getting furious... Have tested around for hours....... -Sincerely TrueType Quote Link to comment
PhAzE Posted October 30, 2015 Author Share Posted October 30, 2015 For now, change entries in: /boot/config/plugins/Plexmediaserver/Plexmediaserver.cfg Save and reload the settings page after. Quote Link to comment
truetype Posted October 30, 2015 Share Posted October 30, 2015 For now, change entries in: /boot/config/plugins/Plexmediaserver/Plexmediaserver.cfg Save and reload the settings page after. Thank you, worked. Though it didn't show the transcoding directory or port at the webgui. But it was changed anyhow when I pressed install. Quote Link to comment
truetype Posted October 31, 2015 Share Posted October 31, 2015 I have another problem when I try to install Couchpotato. Everything works except when I press the start button. Then I get this error down in the left corner saying "Starting CouchPotato... Start failed: No PID created" and then the site refreshes and I am back again without the server started. Is there any solution to this? Quote Link to comment
unevent Posted October 31, 2015 Share Posted October 31, 2015 I have another problem when I try to install Couchpotato. Everything works except when I press the start button. Then I get this error down in the left corner saying "Starting CouchPotato... Start failed: No PID created" and then the site refreshes and I am back again without the server started. Is there any solution to this? Post screenshot of plugin settings page. Quote Link to comment
Khalid Posted November 1, 2015 Share Posted November 1, 2015 Not too sure what happens or what to do. I am getting this with Plex and Transmission Plugin. plugin: installing: /boot/config/plugins-error/Plexmediaserver.plg Installing Plexmediaserver plugin Checking for current bundle files Control file: Not Found Dependency file: Not found Check OK! Downloading new control file Install failed: Unable to detect internet connection plugin: run failed: /bin/bash retval: 1 I can update others unraid plugins without any issues. If I try download the Emby plugins. I get this. plugin: installing: https://raw.githubusercontent.com/PhAzE-Variance/unRAID/master/Plugins/Embyserver.plg plugin: downloading https://raw.githubusercontent.com/PhAzE-Variance/unRAID/master/Plugins/Embyserver.plg plugin: downloading: https://raw.githubusercontent.com/PhAzE-Variance/unRAID/master/Plugins/Embyserver.plg ... done Installing Embyserver plugin Checking for current bundle files Control file: Not Found Dependency file: Not found Mono file: Not found Check OK! Downloading new control file Install failed: Unable to detect internet connection plugin: run failed: /bin/bash retval: 1 Thanks. Quote Link to comment
cybrey Posted November 2, 2015 Share Posted November 2, 2015 Phaze : Quick question. I'm running 5.0.5 of unRaid (yes I know I should update, its on my to do list) and using the SabNZB plugin. Do you have any plans to release a build of the 0.8.0 beta that they have out? Specifically I'm after the 7zip support which seems to be cropping up a fair bit recently. Quote Link to comment
Ookami313 Posted November 3, 2015 Share Posted November 3, 2015 Phaze, A little off topic for which I apologize, but I've been curious for a bit. I remember you saying something a while back, but I'm not sure if anything came of it. Are you still planning on converting your plugins over to docker containers? I've started converting over to containers, but there are so many different ones by different authors, trying to keep up and figure out which are the best to go with gets complicated. I've trusted your plugins for a few years now, so figured I'd check up in the hopes of Phaze docker containers coming soon. Thanks for all your hard work. Quote Link to comment
PhAzE Posted November 3, 2015 Author Share Posted November 3, 2015 I will but first i need to learn the process a bit more for creating them. I want all my containers to use a single base image to reduce overhead. Right now when you install from a bunch of people you may get 2 or 3 base images that need to get loaded. Quote Link to comment
PhAzE Posted November 3, 2015 Author Share Posted November 3, 2015 Phaze : Quick question. I'm running 5.0.5 of unRaid (yes I know I should update, its on my to do list) and using the SabNZB plugin. Do you have any plans to release a build of the 0.8.0 beta that they have out? Specifically I'm after the 7zip support which seems to be cropping up a fair bit recently. On the plugin when you set "use beta" to yes, doesn't it load 0.8.x already? Quote Link to comment
truetype Posted November 3, 2015 Share Posted November 3, 2015 I have another problem when I try to install Couchpotato. Everything works except when I press the start button. Then I get this error down in the left corner saying "Starting CouchPotato... Start failed: No PID created" and then the site refreshes and I am back again without the server started. Is there any solution to this? Post screenshot of plugin settings page. Hello! Down in the left corner you can see the error after I pressed "Start" then after this message the site refreshes and I am back again. Quote Link to comment
truetype Posted November 3, 2015 Share Posted November 3, 2015 I have another problem when I try to install Couchpotato. Everything works except when I press the start button. Then I get this error down in the left corner saying "Starting CouchPotato... Start failed: No PID created" and then the site refreshes and I am back again without the server started. Is there any solution to this? Post screenshot of plugin settings page. Hello! Down in the left corner you can see the error after I pressed "Start" then after this message the site refreshes and I am back again. I feel so noob at this, sorry. Got it working now. Quote Link to comment
Khalid Posted November 4, 2015 Share Posted November 4, 2015 Not too sure what happens or what to do. I am getting this with Plex and Transmission Plugin. plugin: installing: /boot/config/plugins-error/Plexmediaserver.plg Installing Plexmediaserver plugin Checking for current bundle files Control file: Not Found Dependency file: Not found Check OK! Downloading new control file Install failed: Unable to detect internet connection plugin: run failed: /bin/bash retval: 1 I can update others unraid plugins without any issues. If I try download the Emby plugins. I get this. plugin: installing: https://raw.githubusercontent.com/PhAzE-Variance/unRAID/master/Plugins/Embyserver.plg plugin: downloading https://raw.githubusercontent.com/PhAzE-Variance/unRAID/master/Plugins/Embyserver.plg plugin: downloading: https://raw.githubusercontent.com/PhAzE-Variance/unRAID/master/Plugins/Embyserver.plg ... done Installing Embyserver plugin Checking for current bundle files Control file: Not Found Dependency file: Not found Mono file: Not found Check OK! Downloading new control file Install failed: Unable to detect internet connection plugin: run failed: /bin/bash retval: 1 Thanks. I had the exact same issue has this guy. https://lime-technology.com/forum/index.php?topic=42131.0 But I managed to re-install Plex, Transmission and Emby Server by playing with the validation that is checking the internet connection. Just setting HasNet to "no" was fine. Like the guy in that thread I was able to ping stuff and I was able to update other non-PhAzE plugins. I am still not sure what is the issue with the internet connection. Quote Link to comment
cybrey Posted November 4, 2015 Share Posted November 4, 2015 Phaze : Quick question. I'm running 5.0.5 of unRaid (yes I know I should update, its on my to do list) and using the SabNZB plugin. Do you have any plans to release a build of the 0.8.0 beta that they have out? Specifically I'm after the 7zip support which seems to be cropping up a fair bit recently. On the plugin when you set "use beta" to yes, doesn't it load 0.8.x already? Ok .. now I feel stupid Yes it does, upgraded to 0.8.x without any issues. Huge thank you as ever. Quote Link to comment
petjek Posted November 4, 2015 Share Posted November 4, 2015 Hi This is driving me crazy. I'm running 5.0.5 now for some time and for many month everything worked fine. So does the Plex plugin. A few day ago my Amazon Fire TV told me, that I have to update Plex server. To do so I opened the settings page and clicked on the Plex Media Server icon and all I could see was an empty page like this. Couldn't find a reason and so decided to completely wipe everything and reinstall plex from scratch. Unfortunately that didn't help. There is still not access to the configuration page. Plex is running as I edited /boot/config/plugins/Plexmediaserver/Plexmediaserver.cfg but why is the configuration page not working anymore. I don't have many plugins installed. SNAP is the only one by now. Any ideas someone? petjek Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.