Videodr0me Posted November 12, 2015 Share Posted November 12, 2015 http://www.rarlab.com/rar/unrarsrc-5.3.4.tar.gz I hope this will suffice (makefile for linux is included). It does not use any fancy libraries so any generic binary works. I did not find a package specifically for slackware that is recent, but the above source should compile fine. Quote Link to comment
ijuarez Posted November 12, 2015 Share Posted November 12, 2015 @Phaze, or anyone else. I am using a Roku 2 to stream I am on the latest version of the plug-in, I hadn't watch a movie in a while decided to. Of the two movies i watch the same issue happened to both. It would play for 30 40 50 minutes and the movie would stop and state "We are unable to play this movie please make sure that you have access to the server" In fact the server never quit. So i turned to the googles. I read a couple of articles(were a little dated) that roku has some issues. i was able to get to the logs of the roku and in once instance it threw the error that trans coder quit. I tried to find the plex log that show transcode but was unsuccessful. A little more research on the plex forums and they blamed roku and others blamed the universal transcoder. i also have EMBY server running on Unraid, so i queued up the same movie got to the same spot and the movie kept paying with no issues. which lead me to believe that its plex having the issues. BUT when i watch a that same movie using a pc or thru the web it has no problems so I am back at square one. anyone else having a similar issue? Using /tmp as transcode location? No i have a dedicated folder for transcoding, found the issue was the movie. Thanks for the reply Quote Link to comment
umax Posted November 13, 2015 Share Posted November 13, 2015 Guys, I am ashamed to ask this, but I have just installed Transmission plugin and I can't find settings.json file anywhere. I have start/stop the client but the /boot/config/plugins/Transmission folder is still missing json file. Or I am looking at the wrong place? Quote Link to comment
trurl Posted November 14, 2015 Share Posted November 14, 2015 Guys, I am ashamed to ask this, but I have just installed Transmission plugin and I can't find settings.json file anywhere. I have start/stop the client but the /boot/config/plugins/Transmission folder is still missing json file. Or I am looking at the wrong place? Don't use this myself, but I don't think you're doing this right. Typically we don't store app data on the flash. Maybe post a screenshot of your plugin settings. Quote Link to comment
umax Posted November 14, 2015 Share Posted November 14, 2015 Sure, here is plugin screen. Install directory is /usr/local/Transmission, but isn't this in RAM or does it have physical location? Quote Link to comment
trurl Posted November 14, 2015 Share Posted November 14, 2015 Sure, here is plugin screen. Install directory is /usr/local/Transmission, but isn't this in RAM or does it have physical location? You're doing it wrong. Suggest you go to the first of this thread and read a few pages until you find some other screenshots of at least one other plugin. Is this your first attempt at a plugin? Do you have a cache drive? Quote Link to comment
umax Posted November 14, 2015 Share Posted November 14, 2015 Thank for looking at it. Its not my first plugin, I've actually been using them for last year (Couchpotato, Sickrage, BTsync, etc..). I leave the install directory by default, ie, not changing it, thats how the Transmission was installed. No, I dont have cache drive, but I do use Unassigned drives plugin and have a few drives for downloading. What do you suggest? Quote Link to comment
trurl Posted November 14, 2015 Share Posted November 14, 2015 Thank for looking at it. Its not my first plugin, I've actually been using them for last year (Couchpotato, Sickrage, BTsync, etc..). I leave the install directory by default, ie, not changing it, thats how the Transmission was installed. No, I dont have cache drive, but I do use Unassigned drives plugin and have a few drives for downloading. What do you suggest? Set the config directory. How do you have that set on your other plugins? That will also be the solution to finding settings.json Quote Link to comment
tylanga Posted November 14, 2015 Share Posted November 14, 2015 hi Phaze, i switched to Sickrage but still no updates: Stopping SickRage... Stop OK! Installing SickRage... fatal: Could not change back to '/root': Permission denied Install failed: Install file missing hi phaze, i still have problems with my cronjob & sickbeard_alt (sickrage repo) command to update/ check for updates every night: 05 5 * * * /etc/rc.d/rc.Sickbeard_alt update > /boot/logs/phaze.Sickbeard_alt.txt 2>&1 & this is the log: Stopping Sick Beard Alt... Stop OK: Already stopped Installing Sick Beard Alt... fatal: Could not change back to '/root': Permission denied Install failed: Install file missing every other of your plugin like sab, couch potato, plex, plexconnect, nzbmegasearch and btsync are running fine. i'm on 6.1.3 and all plugins are up to date. Can i suggest first switching to my sickrage plugin? I found that the "force update" option can break sickrage when used under sickbeard or sb_alt plugins.. Can you post what shows in the "Activity Log" after you've run this cron and get the error? I want to see if it at least stops the app, and begins the install process. It should help track down what the issue is. Having a similar problem trying to install Sabnzbd via the settings menu. I am getting an error that says "Install file missing". Here is the activity log: 2015-11-14 15:18:36 [iNFO] *** Apply - Enable Initiated *** 2015-11-14 15:18:36 [iNFO] Stopping SABnzbd... 2015-11-14 15:18:36 [iNFO] Stop OK: Not installed 2015-11-14 15:18:37 [iNFO] Updating settings 2015-11-14 15:18:37 [iNFO] Installing SABnzbd... 2015-11-14 15:18:38 [iNFO] Updating dependencies 2015-11-14 15:18:38 [iNFO] Dependency install file has correct MD5 2015-11-14 15:18:38 [iNFO] Using /mnt/cache/.PhAzE-Common for dependency directory 2015-11-14 15:18:39 [iNFO] Dependencies updated successfully 2015-11-14 15:18:39 [iNFO] Updating export file 2015-11-14 15:18:39 [iNFO] Updating shorcut file 2015-11-14 15:18:44 [WARNING] Unable to get latest version from online - Checking USB for any install file 2015-11-14 15:18:44 [ERROR] Install failed: Install file missing Any ideas? I am running Unraid v. 6.1.3 Thanks!! Quote Link to comment
josh5565 Posted November 15, 2015 Share Posted November 15, 2015 I am seeing the same exact issue but with CouchPotato. However on the plugins page I am also seeing some problems... Installed Version:NOT INSTALLED Python Version:NOT WORKING GIT Version:NOT WORKING 2015-11-15 16:19:47 [iNFO] *** Update Initiated *** 2015-11-15 16:19:47 [iNFO] Stopping CouchPotato... 2015-11-15 16:19:47 [iNFO] Stop OK: Already stopped 2015-11-15 16:19:48 [iNFO] Installing CouchPotato... 2015-11-15 16:19:49 [iNFO] Updating dependencies 2015-11-15 16:19:50 [iNFO] Dependency install file has correct MD5 2015-11-15 16:19:50 [iNFO] Using /mnt/cache/.PhAzE-Common for dependency directory 2015-11-15 16:19:52 [iNFO] Dependencies updated successfully 2015-11-15 16:19:52 [iNFO] Updating export file 2015-11-15 16:19:52 [iNFO] Updating shorcut file 2015-11-15 16:19:52 [iNFO] Latest version found: e6fa8b8b9db3c7bdf936f8de66337a86bcaebda5 - Checking USB for same install file 2015-11-15 16:19:52 [iNFO] No copy found on USB - Downloading install file and checking for MD5 file 2015-11-15 16:19:52 [ERROR] Install failed: Install file missing Quote Link to comment
skank Posted November 16, 2015 Share Posted November 16, 2015 Please add subliminal or something equal to get subs please Quote Link to comment
umax Posted November 16, 2015 Share Posted November 16, 2015 Thank for looking at it. Its not my first plugin, I've actually been using them for last year (Couchpotato, Sickrage, BTsync, etc..). I leave the install directory by default, ie, not changing it, thats how the Transmission was installed. No, I dont have cache drive, but I do use Unassigned drives plugin and have a few drives for downloading. What do you suggest? Set the config directory. How do you have that set on your other plugins? That will also be the solution to finding settings.json Indeed, now I get it. I have been using plugins, and on very few reboots (my server is almost all the time online), I was curious as to why I need to re-made settings, never really paid an attention. Everything set & running. Thanks again. Quote Link to comment
PhAzE Posted November 17, 2015 Author Share Posted November 17, 2015 Plex updated. This should remedy the single quotes being passed problem with the password. Quote Link to comment
PhAzE Posted November 17, 2015 Author Share Posted November 17, 2015 I am seeing the same exact issue but with CouchPotato. However on the plugins page I am also seeing some problems... Installed Version:NOT INSTALLED Python Version:NOT WORKING GIT Version:NOT WORKING 2015-11-15 16:19:47 [iNFO] *** Update Initiated *** 2015-11-15 16:19:47 [iNFO] Stopping CouchPotato... 2015-11-15 16:19:47 [iNFO] Stop OK: Already stopped 2015-11-15 16:19:48 [iNFO] Installing CouchPotato... 2015-11-15 16:19:49 [iNFO] Updating dependencies 2015-11-15 16:19:50 [iNFO] Dependency install file has correct MD5 2015-11-15 16:19:50 [iNFO] Using /mnt/cache/.PhAzE-Common for dependency directory 2015-11-15 16:19:52 [iNFO] Dependencies updated successfully 2015-11-15 16:19:52 [iNFO] Updating export file 2015-11-15 16:19:52 [iNFO] Updating shorcut file 2015-11-15 16:19:52 [iNFO] Latest version found: e6fa8b8b9db3c7bdf936f8de66337a86bcaebda5 - Checking USB for same install file 2015-11-15 16:19:52 [iNFO] No copy found on USB - Downloading install file and checking for MD5 file 2015-11-15 16:19:52 [ERROR] Install failed: Install file missing Seems to be a problem with your dependencies. I recommend deleting the dependency repo at (the entire folder): /mnt/cache/.PhAzE-Common (Or /usr/local/PhAzE-Common if you don't use a cache drive) Then reboot. That will force the dependencies to reinstall. Since your dependencies are messed, git clone won't work and that's why you aren't getting the install file downloaded. Quote Link to comment
PhAzE Posted November 17, 2015 Author Share Posted November 17, 2015 hi Phaze, i switched to Sickrage but still no updates: Stopping SickRage... Stop OK! Installing SickRage... fatal: Could not change back to '/root': Permission denied Install failed: Install file missing hi phaze, i still have problems with my cronjob & sickbeard_alt (sickrage repo) command to update/ check for updates every night: 05 5 * * * /etc/rc.d/rc.Sickbeard_alt update > /boot/logs/phaze.Sickbeard_alt.txt 2>&1 & this is the log: Stopping Sick Beard Alt... Stop OK: Already stopped Installing Sick Beard Alt... fatal: Could not change back to '/root': Permission denied Install failed: Install file missing every other of your plugin like sab, couch potato, plex, plexconnect, nzbmegasearch and btsync are running fine. i'm on 6.1.3 and all plugins are up to date. Can i suggest first switching to my sickrage plugin? I found that the "force update" option can break sickrage when used under sickbeard or sb_alt plugins.. Can you post what shows in the "Activity Log" after you've run this cron and get the error? I want to see if it at least stops the app, and begins the install process. It should help track down what the issue is. Having a similar problem trying to install Sabnzbd via the settings menu. I am getting an error that says "Install file missing". Here is the activity log: 2015-11-14 15:18:36 [iNFO] *** Apply - Enable Initiated *** 2015-11-14 15:18:36 [iNFO] Stopping SABnzbd... 2015-11-14 15:18:36 [iNFO] Stop OK: Not installed 2015-11-14 15:18:37 [iNFO] Updating settings 2015-11-14 15:18:37 [iNFO] Installing SABnzbd... 2015-11-14 15:18:38 [iNFO] Updating dependencies 2015-11-14 15:18:38 [iNFO] Dependency install file has correct MD5 2015-11-14 15:18:38 [iNFO] Using /mnt/cache/.PhAzE-Common for dependency directory 2015-11-14 15:18:39 [iNFO] Dependencies updated successfully 2015-11-14 15:18:39 [iNFO] Updating export file 2015-11-14 15:18:39 [iNFO] Updating shorcut file 2015-11-14 15:18:44 [WARNING] Unable to get latest version from online - Checking USB for any install file 2015-11-14 15:18:44 [ERROR] Install failed: Install file missing Any ideas? I am running Unraid v. 6.1.3 Thanks!! Sab seems to install fine for me. Make sure when in the plugin settings gui, all the dependencies show the version number in green. Irs possible sourceforge was having a problem when you were trying to install/update. Quote Link to comment
PhAzE Posted November 17, 2015 Author Share Posted November 17, 2015 Plex updated. This should remedy the single quotes being passed problem with the password. Btw, after this update i recommend you retype your password into the password field and press apply to make sure the correct one is saved in the config file. Quote Link to comment
koyaanisqatsi Posted November 19, 2015 Share Posted November 19, 2015 Having troubles installing the Flexget plugin. It appears that the plugin installs OK, but it fails to install the actual Flexget juju. I can access the Flexget settings page, but it tells me Flexget is not installed and gives an Install button. However clicking that button, it says "Install failed: App executable not found" in the UI. /var/log/Phase-logs/Flexget.log: 2015-11-19 01:49:22 [iNFO] ************************** 2015-11-19 01:49:22 [iNFO] Installing Flexget plugin 2015-11-19 01:49:22 [iNFO] ************************** 2015-11-19 01:49:22 [iNFO] Checking for current bundle files 2015-11-19 01:49:22 [iNFO] Control file: Not Found 2015-11-19 01:49:22 [iNFO] Dependency file: Not found 2015-11-19 01:49:22 [iNFO] PIP file: Not found 2015-11-19 01:49:22 [iNFO] Check OK! 2015-11-19 01:49:23 [iNFO] Downloading new control file 2015-11-19 01:49:24 [iNFO] Download OK: Control file passed MD5 check 2015-11-19 01:49:24 [iNFO] Downloading new dependency file 2015-11-19 01:49:31 [iNFO] Download OK: Dependency file passed MD5 check 2015-11-19 01:49:31 [iNFO] Downloading new PIP install file 2015-11-19 01:49:33 [iNFO] Download OK: PIP install file passed MD5 check 2015-11-19 01:49:33 [iNFO] Locating and removing old bundle files 2015-11-19 01:49:33 [iNFO] Running install script for FlexGet 2015-11-19 01:49:33 [iNFO] Creating default plugin config file 2015-11-19 01:49:33 [iNFO] Verifying plugin config file elements 2015-11-19 01:49:33 [iNFO] Verification OK! 2015-11-19 01:49:33 [iNFO] Installing control file 2015-11-19 01:49:33 [iNFO] Control file install OK! 2015-11-19 01:49:33 [iNFO] Removing Windows carriage characters from important files 2015-11-19 01:49:33 [iNFO] Cleaning up temp files and folders 2015-11-19 01:49:33 [iNFO] ************************** 2015-11-19 01:49:33 [iNFO] Install complete! 2015-11-19 01:49:33 [iNFO] ************************** 2015-11-19 01:50:11 [iNFO] *** Apply - Disable Initiated *** 2015-11-19 01:50:11 [iNFO] Stopping FlexGet... 2015-11-19 01:50:11 [iNFO] Stop OK: Not installed 2015-11-19 01:50:12 [iNFO] Updating settings 2015-11-19 01:50:12 [iNFO] Updating plugin config file 2015-11-19 01:50:12 [iNFO] Updating dependencies 2015-11-19 01:50:12 [iNFO] Dependency install file has correct MD5 2015-11-19 01:50:12 [iNFO] Using /mnt/cache/.PhAzE-Common for dependency directory 2015-11-19 01:50:34 [iNFO] Dependencies updated successfully 2015-11-19 01:50:34 [iNFO] Updating export file 2015-11-19 01:50:34 [iNFO] Updating shorcut file 2015-11-19 01:50:34 [iNFO] Updating PIP 2015-11-19 01:50:34 [iNFO] PIP install file has correct MD5 2015-11-19 01:50:34 [iNFO] Using /mnt/cache/.PhAzE-Common for PIP directory 2015-11-19 01:50:39 [iNFO] PIP updated successfully 2015-11-19 01:50:39 [iNFO] Application config file found 2015-11-19 01:50:44 [iNFO] *** Install Initiated *** 2015-11-19 01:50:44 [iNFO] Installing FlexGet... 2015-11-19 01:50:45 [iNFO] Updating dependencies 2015-11-19 01:50:45 [iNFO] Dependency install file has correct MD5 2015-11-19 01:50:45 [iNFO] Using /mnt/cache/.PhAzE-Common for dependency directory 2015-11-19 01:50:46 [iNFO] Dependencies updated successfully 2015-11-19 01:50:46 [iNFO] Updating export file 2015-11-19 01:50:46 [iNFO] Updating shorcut file 2015-11-19 01:50:46 [iNFO] Updating PIP 2015-11-19 01:50:46 [iNFO] PIP install file has correct MD5 2015-11-19 01:50:46 [iNFO] Using /mnt/cache/.PhAzE-Common for PIP directory 2015-11-19 01:50:47 [iNFO] PIP updated successfully 2015-11-19 01:50:48 [iNFO] Latest version found: 1.2.392 - Checking USB for same install file 2015-11-19 01:50:48 [iNFO] No copy found on USB - Downloading install file and checking for MD5 file 2015-11-19 01:50:52 [iNFO] No MD5 file located - Attempting decompression integrity test 2015-11-19 01:50:52 [iNFO] Integrity of Flexget-PhAzE-1.2.392-src.tar.gz looks good - Proceeding with install 2015-11-19 01:50:52 [iNFO] Creating MD5 file 2015-11-19 01:50:54 [iNFO] Updating application directories 2015-11-19 01:50:54 [iNFO] Application config file found 2015-11-19 01:50:54 [ERROR] Install failed: App executable not found 2015-11-19 01:53:09 [iNFO] *** Install Initiated *** 2015-11-19 01:53:09 [iNFO] Installing FlexGet... 2015-11-19 01:53:10 [iNFO] Updating dependencies 2015-11-19 01:53:10 [iNFO] Dependency install file has correct MD5 2015-11-19 01:53:10 [iNFO] Using /mnt/cache/.PhAzE-Common for dependency directory 2015-11-19 01:53:11 [iNFO] Dependencies updated successfully 2015-11-19 01:53:11 [iNFO] Updating export file 2015-11-19 01:53:11 [iNFO] Updating shorcut file 2015-11-19 01:53:11 [iNFO] Updating PIP 2015-11-19 01:53:11 [iNFO] PIP install file has correct MD5 2015-11-19 01:53:11 [iNFO] Using /mnt/cache/.PhAzE-Common for PIP directory 2015-11-19 01:53:11 [iNFO] PIP updated successfully 2015-11-19 01:53:12 [iNFO] Latest version found: 1.2.392 - Checking USB for same install file 2015-11-19 01:53:12 [iNFO] Copy found on USB, checking for MD5 file 2015-11-19 01:53:12 [iNFO] Located MD5 file - Testing against install file 2015-11-19 01:53:12 [iNFO] MD5 of Flexget-PhAzE-1.2.392-src.tar.gz is valid - Proceeding with install 2015-11-19 01:53:14 [iNFO] Updating application directories 2015-11-19 01:53:14 [iNFO] Application config file found 2015-11-19 01:53:14 [ERROR] Install failed: App executable not found And a search of the file system for anything Flexget: root@server:/# find . -iname *flexget* ./boot/config/plugins/Flexget ./boot/config/plugins/Flexget/Flexget-PhAzE-Control-2.1.tar.gz ./boot/config/plugins/Flexget/Flexget-PhAzE-Dependency-1.5_x64.tar.gz ./boot/config/plugins/Flexget/Flexget-PhAzE-pip-1.0.tar.gz ./boot/config/plugins/Flexget/Flexget.cfg ./boot/config/plugins/Flexget/Flexget-PhAzE-1.2.392-src.tar.gz ./boot/config/plugins/Flexget/Flexget-PhAzE-1.2.392-src.tar.gz.md5 ./boot/config/plugins/Flexget.plg ./usr/local/Flexget ./usr/local/emhttp/plugins/Flexget ./usr/local/emhttp/plugins/Flexget/Flexget.page ./usr/local/emhttp/plugins/Flexget/Flexget.png ./usr/local/emhttp/plugins/Flexget/icons/flexget.png ./usr/local/emhttp/plugins/Flexget/include/Flexget.php ./usr/local/emhttp/plugins/Flexget/scripts/rc.Flexget ./usr/local/emhttp/plugins/Flexget/styles/Flexget5.css ./usr/local/emhttp/plugins/Flexget/styles/Flexget6.css ./usr/bin/Flexget-env ./var/run/Flexget ./var/log/PhAzE-Logs/Flexget.log ./var/log/plugins/Flexget.plg ./tmp/plugins/Flexget.txt ./mnt/user/apps/flexget ./mnt/user/.PhAzE-Common/Flexget ./mnt/cache/apps/flexget ./mnt/cache/.PhAzE-Common/Flexget ./etc/rc.d/rc.Flexget Screen Cap attached. Quote Link to comment
Syco54645 Posted November 19, 2015 Share Posted November 19, 2015 Hello, Trying to install Emby and getting an error that it is failing the integrity check. Any ideas here? Saw someone else having that issue but not sure if it pertains to me as it was a different plugin. Any help is greatly appreciated. Thanks -Syco54645 edit: Also unrelated but for some reason python 2.7 is never installed to meet dependencies. I have 2.6 installed as I am running the unplugged CP plugin. Is this causing an issue? Quote Link to comment
ijuarez Posted November 20, 2015 Share Posted November 20, 2015 Is it just me (Plex pass member) or have their been a ton of server updates lately. Quote Link to comment
switchman Posted November 20, 2015 Share Posted November 20, 2015 There have been several updates lately. You also have to remember to change the the moniker from Plex pass member to what it really is, beta plus tester. Yes I have lifetime Plex pass. Well worth what I spent. Quote Link to comment
PhAzE Posted November 20, 2015 Author Share Posted November 20, 2015 Are they actually changing it or was that sarcasm? i still see plex pass plastered all over their website. Quote Link to comment
renhack Posted November 20, 2015 Share Posted November 20, 2015 Hello, Trying to install Emby and getting an error that it is failing the integrity check. Any ideas here? Saw someone else having that issue but not sure if it pertains to me as it was a different plugin. Any help is greatly appreciated. I get the same thing. No MD5. I'm hoping it fixes an instability issue im having with emby crashing daily. 2015-11-19 15:31:42 [iNFO] Latest version found: 3.0.5781.2 - Checking USB for same install file 2015-11-19 15:31:42 [iNFO] No copy found on USB - Downloading install file and checking for MD5 file 2015-11-19 15:31:46 [iNFO] No MD5 file located - Attempting decompression integrity test 2015-11-19 15:31:46 [ERROR] Install failed: Failed integrity test Quote Link to comment
Syco54645 Posted November 20, 2015 Share Posted November 20, 2015 Hello, Trying to install Emby and getting an error that it is failing the integrity check. Any ideas here? Saw someone else having that issue but not sure if it pertains to me as it was a different plugin. Any help is greatly appreciated. I get the same thing. No MD5. I'm hoping it fixes an instability issue im having with emby crashing daily. 2015-11-19 15:31:42 [iNFO] Latest version found: 3.0.5781.2 - Checking USB for same install file 2015-11-19 15:31:42 [iNFO] No copy found on USB - Downloading install file and checking for MD5 file 2015-11-19 15:31:46 [iNFO] No MD5 file located - Attempting decompression integrity test 2015-11-19 15:31:46 [ERROR] Install failed: Failed integrity test Glad it is not just me. Currently using plex but really want to give emby a try after their recent announcement of killing PHT, I feel like they do not really have their power users in mind with that decision. Quote Link to comment
PhAzE Posted November 20, 2015 Author Share Posted November 20, 2015 I will take a look at the md5 errors later. For now, delete the install zip and md5 in the /boot/config/plugins/Emby folder and see if it will install after that. Quote Link to comment
Syco54645 Posted November 20, 2015 Share Posted November 20, 2015 I will take a look at the md5 errors later. For now, delete the install zip and md5 in the /boot/config/plugins/Emby folder and see if it will install after that. Did that last night and did not appear to help. Having other issues with the server right now. About to just migrate to 6.0 and redo the plugins. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.