[PhAzE] Plugins for Unraid 5/6


Recommended Posts

Couchpotato won't start when config directory is set anywhere on /use/local/*

 

You need to set the config directory to a disk or the array for it to start. Not sure why, but the program detects that unRAID is set as a ram drive and fails to start because of that.

 

Thanks for the note.  Unfortunately, I'm not even at that state yet.  I'm still at the paste the https://*.plg file into Install Plugins area.  After pasting it, it's not coming up under Settings like the other apps are.

 

--Update--

Seeing that I can't seem to get it to work, I'm going to uninstall all the other apps as well and run the applications through docker with the use of community applications.  I sense that everything's moving this direction (apps inside of community applications and through docker) that I should probably get ahead of it.

Link to comment

Hello,

 

(recently posted here https://lime-technology.com/forum/index.php?topic=52193.0)

 

After the automatic update to 6.2 I've had a lot of different problems.

 

One of the problems is that I cannot update SABnzbd, when I press update I get the following in the activity log and then I am back to same screen again. And I cannot start the plugin either.

 

--

 

Then I got the same problem with Couchpotato AND Sick beard... :(

 

Is there anyway I can safely reinstall these 3 plugins by saving the configs?

 

--

 

This is the log when I press the update button.

2016-09-23 21:35:06 [iNFO] *** Update Initiated ***

2016-09-23 21:35:06 [iNFO] Stopping SABnzbd...

2016-09-23 21:35:06 [iNFO] Stop OK: Already stopped

2016-09-23 21:35:07 [iNFO] Installing SABnzbd...

2016-09-23 21:35:08 [iNFO] Updating dependencies

2016-09-23 21:35:08 [iNFO] Dependency install file has correct MD5

2016-09-23 21:35:08 [iNFO] Using /mnt/cache/.PhAzE-Common for dependency directory

2016-09-23 21:35:08 [iNFO] Dependencies updated successfully

2016-09-23 21:35:08 [iNFO] Updating export file

2016-09-23 21:35:08 [iNFO] Updating shorcut file

2016-09-23 21:35:08 [iNFO] Latest version found: 1.1.0 - Checking USB for same install file

2016-09-23 21:35:08 [iNFO] Copy found on USB, checking for MD5 file

2016-09-23 21:35:08 [iNFO] Located MD5 file - Testing against install file

2016-09-23 21:35:08 [iNFO] MD5 of Sabnzbd-PhAzE-1.1.0-src.tar.gz is valid - Proceeding with install

2016-09-23 21:35:08 [iNFO] Updating application directories

2016-09-23 21:35:09 [iNFO] Updating application config file

2016-09-23 21:35:09 [iNFO] Install OK!

 

It says "Install OK!" But it is not OK... The same update button appears again. And if I press start I get this in the log:

 

2016-09-23 21:36:52 [iNFO] *** Button Start Initiated ***

2016-09-23 21:36:52 [iNFO] Syncing application and plugin config files

2016-09-23 21:36:52 [iNFO] Updating plugin config file

2016-09-23 21:36:52 [iNFO] Starting SABnzbd...

2016-09-23 21:36:52 [iNFO] Updating dependencies

2016-09-23 21:36:52 [iNFO] Dependency install file has correct MD5

2016-09-23 21:36:52 [iNFO] Using /mnt/cache/.PhAzE-Common for dependency directory

2016-09-23 21:36:52 [iNFO] Dependencies updated successfully

2016-09-23 21:36:52 [iNFO] Updating export file

2016-09-23 21:36:52 [iNFO] Updating shorcut file

2016-09-23 21:36:52 [iNFO] Updating application directories

2016-09-23 21:36:52 [iNFO] Updating application config file

2016-09-23 21:37:05 [ERROR] Start failed: No PID created

 

ccf8847a5a2730ee81f2b365a17b7ce4.png

 

 

Thanks in regards,

TrueType

 

Link to comment

Hey, try this:

 

- Stop all PhAzE plugins you have installed

- delete common folder: rm -rf /mnt/cache/.PhAzE-Common/

- start the plugins

 

It's not about having an update, but rather you have broken dependencies and it can't get the version that you have installed to compare with the online version. The above should fix them all though.

Link to comment

After the update to 6.2 I am having a problem accessing plex web. It gets to the splash screen but will not go any further. I have no problem accessing it by going to plex.tv\web.  Also the unraid gui is running slow.

 

Sounds like more than just a Plex issue if the Unraidgui is slow as well.  Might be worth posting some diagnostics and sorting out any issues with your Unraid before worrying about Plex.  Trying to work out issues when all we're told is "It doesn't work right" is impossible. 

Link to comment

Been trying to install the Plex plugin for the last 3 hours, and I always end up with this when I got to config the gui

 

2016-10-03 14:32:54 [iNFO] *** Apply - Enable Initiated ***

2016-10-03 14:32:54 [iNFO] Stopping Plex Media Server...

2016-10-03 14:32:54 [iNFO] Stop OK: Not installed

2016-10-03 14:32:55 [iNFO] Updating settings

2016-10-03 14:32:55 [iNFO] Installing Plex Media Server...

2016-10-03 14:32:56 [iNFO] Updating dependencies

2016-10-03 14:32:56 [iNFO] No dependencies required for this application

2016-10-03 14:32:56 [iNFO] Updating export file

2016-10-03 14:32:56 [iNFO] Updating shorcut file

2016-10-03 14:32:59 [WARNING] Unable to get latest version from online - Checking USB for any install file

2016-10-03 14:32:59 [ERROR] Install failed: Install file missing

 

I'm using a cache drive and have been setting the install and library directories to /mnt/cache/appdata. I tried to do a clean install as well, but I get this every time. Any ideas?

Link to comment

I'm getting this error on 5.0.5 when trying to install Subsonic

 

2016-10-03 18:20:57 [WARNING] Unable to get latest version from online - Checking USB for any install file

2016-10-03 18:20:57 [ERROR] Install failed: Install file missing

 

I believe the problem is that the link "http://sourceforge.net/projects/subsonic" is broken, but I'm really not sure.  Thanks in advance for any help! I really appreciate all that you do!!

Link to comment

I'll stick with these. The only reason I've stayed with unRAID for as long as I have, is that it's set it and forget it.

Before you forget it, make sure you set up Notifications if you haven't already. Then you can forget it until unRAID notifies you there is a problem.
Link to comment

And you should be moving to dockers instead of plugins for these apps.

 

Why? Is the plugin system going away? Is there something wrong with these plugins? I'm perfectly happy using this lightweight piece of software to manage my Plex Server updates. Phaze's plugins work well and Phaze is very quick to resolve issues as they arise. For me it is the right tool for the job.

Link to comment

Yeah I too use plugins where I can. They work just fine and use less space. It's also really fast to get a new plugin up and running as dockers from different Dev can sometimes use different OS which ends up taking longer to install and use up more space. I know it's not significant, but every MB counts for me :P

 

 

Sent from my iPhone using Tapatalk

Link to comment

And you should be moving to dockers instead of plugins for these apps.

 

Why? Is the plugin system going away? Is there something wrong with these plugins? I'm perfectly happy using this lightweight piece of software to manage my Plex Server updates. Phaze's plugins work well and Phaze is very quick to resolve issues as they arise. For me it is the right tool for the job.

There is no immediate plans for plugins to go away, and in fact, some things almost have to be plugins, such as things that add functionality to the webUI.

 

But PhAzE is the only person still doing plugins of these sort of applications. He does a great job of keeping these working and supporting them. If he decides to move on then I doubt anyone will pick these up.

 

Lots of docker developers, lots of dockers, and more coming on board every day. If you install Community Applications you will see that there are literally hundreds of dockers developed and supported by this community.

 

And dockers isolate their code from the rest of unRAID. If you have a problem, one of the first things people will recommend you try is running in SAFE mode, which means none of your plugins will be loaded. This is because plugins can and have caused issues to the core unRAID.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.