May 30, 201412 yr i recently rebuilt my server. its a mitx board with a 3.0ghz dualcore pentium lga1150 cpu and 8gb of ram. i have 8 2tb wd green drives connected to a m1015 sata card running in a pciex16 slot on the mobo. im using 5.0 rc1 i believe. when using midnight commander to move groups of large files (ie 25x7gb files) the transfer speeds are 15-20MBs. is thsi normal speed for internal transfers? also 3 of the drives in my array HAVE jumpers installed on them if that makes any diffrance .thx in advance SIDE NOTE have had 2 flash drives die over the last 4-5 years using unraid. would like to thank tom for his super fast replies to my email to transfer my liscence to another flash drive getting me back up and running in less than 2 hours. :)
May 30, 201412 yr Author thx for your reply. will update it when i get home from work. is that abnormal speeds? ive never tried mc before and used to use windows to transfer files which as expected was also very slow. what kinda speeds do everyone else get internally? thx
May 31, 201412 yr if your doing transers to and from the protected array that speed is rather normal. Sent from my SM-G900W8 using Tapatalk
May 31, 201412 yr Author I'm using a m1015 card with all 8 drives connected to it. I updated to the latest version but it's still topping out at 15MB. I'm thinking it might be a issue with midnight commander because windows transfers are around 25MB+ and rebuilding parity was around 45MB ive added a syslog if that helps also seem to be having problems stopping the array. its hanging on unmounting the disk if the syslog helps with that. thx unraid.txt
Archived
This topic is now archived and is closed to further replies.