deaerator Posted June 24, 2014 Share Posted June 24, 2014 I am having problems in getting nzbget to start. This is what i have used for a run command docker run -d --net=host --name="nzbget" -v /etc/localtime:/etc/localtime:ro -v /mnt/cache/appdata/nzbget:/config -v /mnt/user:/AppData -p 6789:6789 needo/nzbget root@UNRAID:~# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES root@UNRAID:~# docker ps -a CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES de8d104cdd0a needo/nzbget:latest /bin/bash /start.sh 3 minutes ago Exited (255) 4 seconds ago nzbget I even ran the nobody user command: root@UNRAID:~# chown -R nobody:users /mnt/cache/appdata/nzbget Quote Link to comment
needo Posted June 24, 2014 Author Share Posted June 24, 2014 I am having problems in getting nzbget to start. Could you please post what docker logs nzbget says? Thank you. Quote Link to comment
deaerator Posted June 24, 2014 Share Posted June 24, 2014 I am having problems in getting nzbget to start. Could you please post what docker logs nzbget says? Thank you. hate to be igorant but where is the location of these logs Quote Link to comment
needo Posted June 24, 2014 Author Share Posted June 24, 2014 I am having problems in getting nzbget to start. Could you please post what docker logs nzbget says? Thank you. hate to be igorant but where is the location of these logs Not at all it is actually the command: docker logs nzbget Quote Link to comment
deaerator Posted June 24, 2014 Share Posted June 24, 2014 I rebooted and started from scratch and have the same results [root@UNRAID:~# docker logs nzbget FATAL ERROR: Could not open file /config/nzbget.conf Quote Link to comment
needo Posted June 24, 2014 Author Share Posted June 24, 2014 I rebooted and started from scratch and have the same results [root@UNRAID:~# docker logs nzbget FATAL ERROR: Could not open file /config/nzbget.conf If using nzbget for the first time please download this sample configuration file, rename it to nzbget.conf and put it in /path/to/dir/with/nzbget.conf/ - https://raw.githubusercontent.com/needo37/nzbget/master/nzbget.conf.sample Quote Link to comment
deaerator Posted June 24, 2014 Share Posted June 24, 2014 i got it to start but it asks for username and pw root@UNRAID:~# docker start nzbget nzbget root@UNRAID:~# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 8178e3f817ed needo/nzbget:latest /bin/bash /start.sh 3 minutes ago Up 3 seconds nzbget root@UNRAID:~# docker logs nzbget FATAL ERROR: Could not open file /config/nzbget.conf FATAL ERROR: Could not open file /config/nzbget.conf FATAL ERROR: Could not open file /config/nzbget.conf /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory something seems messed up Also I noticed that unraid created a share on its own, is this normal behavoir, I had to set the share to cache only then it started Quote Link to comment
needo Posted June 24, 2014 Author Share Posted June 24, 2014 i got it to start but it asks for username and pw The default username is nzbget and the password is tegbzn6789 you will then need to configure nzbget to fit your environment. Quote Link to comment
itimpi Posted June 24, 2014 Share Posted June 24, 2014 Also I noticed that unraid created a share on its own, is this normal behavoir, I had to set the share to cache only then it started Any top level folder that you create will automatically be made into a share by unRAID. Therefore if you created a new folder at the top level of the cache drive this will be made into a share that you may have to subsequently set to be cache 'only' (assuming that is how you want it to behave) as it never defaults to cache only. Quote Link to comment
n3IVI0 Posted June 24, 2014 Share Posted June 24, 2014 I have been trying to get the Deluge thin client to connect to the daemon, following these instructions: http://dev.deluge-torrent.org/wiki/UserGuide/ThinClient No success. Will not connect. Anybody have any notion how to make that work? By the by, were you still planning on doing a docker of Transmission? If you are, no hurry, I was just wondering. Can't get this Deluge app to work the way I want, and I need a functional BitTorrent client. Quote Link to comment
needo Posted June 24, 2014 Author Share Posted June 24, 2014 I have been trying to get the Deluge thin client to connect to the daemon, following these instructions: http://dev.deluge-torrent.org/wiki/UserGuide/ThinClient No success. Will not connect. Anybody have any notion how to make that work? By the by, were you still planning on doing a docker of Transmission? If you are, no hurry, I was just wondering. Can't get this Deluge app to work the way I want, and I need a functional BitTorrent client. I only opened up the web-ui port for delgue and not the server port for other clients to connect. I will post an update today which will open that up. I am still working on a transmission docker but it is taking awhile, deluge was easier to turn into a dock. Quote Link to comment
n3IVI0 Posted June 24, 2014 Share Posted June 24, 2014 Oh good. It was driving me nuts trying to figure out what I was not doing (is it permissions, is it syntax, did I misspell something, do I need absolute paths?). Now I can just chill and wait for the update. Thanks! Also, with Deluge, I can specify either relative or absolute path to the downloads and torrent folders, but although it starts the download, completes it, and seeds, I can't find either the saved torrent files or the downloaded file in any of the places I have specified, or in the config directory either. Quote Link to comment
JustinChase Posted June 24, 2014 Share Posted June 24, 2014 In nzbdrone, I'm getting this 'error'... Unable to update, running from write-protected folder. I've run the chown on the cache/appdata folder, so I'm not sure which folder it sees as write-protected, nor how to resolve it. In-app updates do not work in Docker. I did update nzbdrone this morning with the latest version so if you grab the latest image... docker stop nzbdrone docker rm nzbdrone docker rmi nzbdrone And then your docker run command you will grab it. Thanks, I did install your version fresh yesterday afternoon, so I assume I do have the latest. I was just pointing out that the program is telling me that it's unable to update due to a write-only folder. I only brought it up because when I was running the version from Sensei73 for the last few days, prior to this, and it wasn't giving me this warning, so I thought it might be the way this docker was installed, as opposed to his version. not a big deal really, just thought it weird, and perhaps could be 'fixed'. Quote Link to comment
dmacias Posted June 24, 2014 Share Posted June 24, 2014 Oh good. It was driving me nuts trying to figure out what I was not doing (is it permissions, is it syntax, did I misspell something, do I need absolute paths?). Now I can just chill and wait for the update. Thanks! Also, with Deluge, I can specify either relative or absolute path to the downloads and torrent folders, but although it starts the download, completes it, and seeds, I can't find either the saved torrent files or the downloaded file in any of the places I have specified, or in the config directory either. You're download paths inside of deluge will start with /downloads Quote Link to comment
deaerator Posted June 24, 2014 Share Posted June 24, 2014 i got it to start but it asks for username and pw The default username is nzbget and the password is tegbzn6789 you will then need to configure nzbget to fit your environment. I don't get a prompt for username or password. Error: 503 Service Unavailable and when i try to get the logs root@UNRAID:~# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 68545aeb08d7 needo/nzbget:latest /bin/bash /start.sh 10 minutes ago Up 10 minutes nzbget root@UNRAID:~# docker logs nzbget /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory root@UNRAID:~# Quote Link to comment
needo Posted June 24, 2014 Author Share Posted June 24, 2014 i got it to start but it asks for username and pw The default username is nzbget and the password is tegbzn6789 you will then need to configure nzbget to fit your environment. I don't get a prompt for username or password. Error: 503 Service Unavailable and when i try to get the logs root@UNRAID:~# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 68545aeb08d7 needo/nzbget:latest /bin/bash /start.sh 10 minutes ago Up 10 minutes nzbget root@UNRAID:~# docker logs nzbget /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory /downloads/dst/nzbget.log: No such file or directory root@UNRAID:~# I'll post a fix in a few. I see where it can be improved. Quote Link to comment
needo Posted June 24, 2014 Author Share Posted June 24, 2014 CHANGELOG 06/24/2014 (deluge) Opened up the server port Added PlexConnect: https://registry.hub.docker.com/u/needo/plexconnect/ Added mariadb: https://registry.hub.docker.com/u/needo/mariadb/ (nzbget) Generate nzbget.conf and downloads directory on a new install. Quote Link to comment
deaerator Posted June 24, 2014 Share Posted June 24, 2014 I noticed in your run commands you don't specify "-h or use --net= host" is there a reason on why not to add that command. I'm still not having any luck with this container root@UNRAID:/mnt/cache/apps# docker run -d --name="nzbget" -v /mnt/cache/apps/nzbget:/config -v /mnt/user:/downloads -v /etc/localtime:/etc/localtime:ro -p 6789:6789 needo/nzbget a805a39307b200a66065e99780e3c6eb7d57e51383b49afe3ee1eda5de8885de root@UNRAID:/mnt/cache/apps# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES a805a39307b2 needo/nzbget:latest /bin/bash /start.sh 2 minutes ago Up 2 minutes 0.0.0.0:6789->6789/tcp nzbget cd7378cc12da needo/nzbdrone:latest mono /opt/NzbDrone/N 2 hours ago Up 2 hours nzbdrone logs report root@UNRAID:/mnt/cache/apps# docker logs nzbget /start.sh: line 5: continue: only meaningful in a `for', `while', or `until' loop /start.sh: line 13: continue: only meaningful in a `for', `while', or `until' loop /downloads/dst/nzbget.log: No such file or directory Quote Link to comment
needo Posted June 24, 2014 Author Share Posted June 24, 2014 I noticed in your run commands you don't specify "-h or use --net= host" is there a reason on why not to add that command. I'm still not having any luck with this container root@UNRAID:/mnt/cache/apps# docker run -d --name="nzbget" -v /mnt/cache/apps/nzbget:/config -v /mnt/user:/downloads -v /etc/localtime:/etc/localtime:ro -p 6789:6789 needo/nzbget a805a39307b200a66065e99780e3c6eb7d57e51383b49afe3ee1eda5de8885de root@UNRAID:/mnt/cache/apps# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES a805a39307b2 needo/nzbget:latest /bin/bash /start.sh 2 minutes ago Up 2 minutes 0.0.0.0:6789->6789/tcp nzbget cd7378cc12da needo/nzbdrone:latest mono /opt/NzbDrone/N 2 hours ago Up 2 hours nzbdrone logs report root@UNRAID:/mnt/cache/apps# docker logs nzbget /start.sh: line 5: continue: only meaningful in a `for', `while', or `until' loop /start.sh: line 13: continue: only meaningful in a `for', `while', or `until' loop /downloads/dst/nzbget.log: No such file or directory So odd. This works perfectly on my unRAID systems. New version building now. Quote Link to comment
deaerator Posted June 24, 2014 Share Posted June 24, 2014 I noticed in your run commands you don't specify "-h or use --net= host" is there a reason on why not to add that command. I'm still not having any luck with this container root@UNRAID:/mnt/cache/apps# docker run -d --name="nzbget" -v /mnt/cache/apps/nzbget:/config -v /mnt/user:/downloads -v /etc/localtime:/etc/localtime:ro -p 6789:6789 needo/nzbget a805a39307b200a66065e99780e3c6eb7d57e51383b49afe3ee1eda5de8885de root@UNRAID:/mnt/cache/apps# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES a805a39307b2 needo/nzbget:latest /bin/bash /start.sh 2 minutes ago Up 2 minutes 0.0.0.0:6789->6789/tcp nzbget cd7378cc12da needo/nzbdrone:latest mono /opt/NzbDrone/N 2 hours ago Up 2 hours nzbdrone logs report root@UNRAID:/mnt/cache/apps# docker logs nzbget /start.sh: line 5: continue: only meaningful in a `for', `while', or `until' loop /start.sh: line 13: continue: only meaningful in a `for', `while', or `until' loop /downloads/dst/nzbget.log: No such file or directory So odd. This works perfectly on my unRAID systems. New version building now. GREMLINS.... Quote Link to comment
needo Posted June 24, 2014 Author Share Posted June 24, 2014 GREMLINS.... Please try it now. Quote Link to comment
deaerator Posted June 24, 2014 Share Posted June 24, 2014 i must be doing something wrong here. I ran the command, and "docker ps" tells me its running but only have the conf file in that location and for some reason it made top level shares on my unraid server. inter nzb tmp queue nzbget Quote Link to comment
JustinChase Posted June 24, 2014 Share Posted June 24, 2014 I noticed in your run commands you don't specify "-h or use --net= host" is there a reason on why not to add that command. I noticed the same thing, and originally had included it in my run commands, but then removed all images, and reinstalled without any -h in the command, and I can still connect with servername:port, so there must be something in the containers that handles this for us. Quote Link to comment
needo Posted June 24, 2014 Author Share Posted June 24, 2014 i must be doing something wrong here. I ran the command, and "docker ps" tells me its running but only have the conf file in that location and for some reason it made top level shares on my unraid server. inter nzb tmp queue nzbget In your docker run command you specify: -v /mnt/user:/downloads It's creating the downloads where you told them to. That really should be -v /mnt/cache/downloads:/downloads (If you have a cache drive) Quote Link to comment
deaerator Posted June 24, 2014 Share Posted June 24, 2014 I am getting closer root@UNRAID:~# mkdir /mnt/cache/apps/downloads root@UNRAID:~# chown -R nobody:users /mnt/cache/apps/downloads root@UNRAID:~# docker run -d --name="nzbget" -v /mnt/cache/apps/nzbget:/config -v /mnt/cache/apps/downloads:/downloads -v /etc/localtime:/etc/localtime:ro -p 6789:6789 needo/nzbget Unable to find image 'needo/nzbget' locally Pulling repository needo/nzbget 12c466d38830: Download complete 511136ea3c5a: Download complete d1881793a057: Download complete b164861940b8: Download complete 5f14d446e479: Download complete 6dea55328caf: Download complete 9b33cab0194f: Download complete 27247942c782: Download complete de7d7f6d6b5f: Download complete 1f873dbc5d99: Download complete 2221c6a7dc4f: Download complete c76670891a3d: Download complete 5ecdb5e3ce38: Download complete f50962993dcc: Download complete 2f0816e4f756: Download complete 41c268842e02: Download complete b39ab05e6340b2a8d3cd755865247c70ef7442fe4cc14f61855a22b32dec7488 root@UNRAID:~# dicker ps -bash: dicker: command not found root@UNRAID:~# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES b39ab05e6340 needo/nzbget:latest /bin/bash /start.sh 9 seconds ago Up 8 seconds 0.0.0.0:6789->6789/tcp nzbget cd7378cc12da needo/nzbdrone:latest mono /opt/NzbDrone/N 3 hours ago Up 40 minutes nzbdrone root@UNRAID:~# docker logs nzbget log Tue Jun 24 13:26:54 2014 INFO nzbget 12.0 daemon-mode when i attempt to open a browser and enter location of "unraid:6789 or 192.68.2.99" I get "oops google chrome cannot connect" Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.