Vynce Posted October 1, 2016 Share Posted October 1, 2016 VNC appears to be broken with the most recent update: # docker exec -it CrashPlan bash root@unRAID:/# /etc/service/tigervnc/run [...] Sat Oct 1 17:34:27 2016 vncext: VNC extension running! vncext: Listening for VNC connections on all interface(s), port 4239 vncext: created VNC server for screen 0 XKB: Failed to compile keymap Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config. Fatal server error: Failed to activate core devices. root@unRAID:/# /etc/service/novnc/run Must have netstat installed Quote Link to comment
rob Posted October 2, 2016 Share Posted October 2, 2016 VNC appears to be broken with the most recent update: # docker exec -it CrashPlan bash root@unRAID:/# /etc/service/tigervnc/run [...] Sat Oct 1 17:34:27 2016 vncext: VNC extension running! vncext: Listening for VNC connections on all interface(s), port 4239 vncext: created VNC server for screen 0 XKB: Failed to compile keymap Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config. Fatal server error: Failed to activate core devices. root@unRAID:/# /etc/service/novnc/run Must have netstat installed Ditto here... EDIT: Updated fixed the issue - thanks! Quote Link to comment
henfri Posted October 2, 2016 Share Posted October 2, 2016 Hello, I was experiencing the same issue. With this, you can revert to an older version: docker run --net=host \ -v /srv/Daten/dockerconfig/Crashplan:/config \ -v /srv/DataPool/Daten:/srv/DataPool/Daten \ -v /srv/DataPool/Backups:/data \ -p 4242:4242 -p 4243:4243 -p 4280:4280 gfjardim/crashplan@sha256:9d8eed240da821f1dca66622442838755811b688ae4d442b8078e1ea3d3d5f03 Regards, Hendrik Quote Link to comment
gfjardim Posted October 2, 2016 Author Share Posted October 2, 2016 Hello, I was experiencing the same issue. With this, you can revert to an older version: docker run --net=host \ -v /srv/Daten/dockerconfig/Crashplan:/config \ -v /srv/DataPool/Daten:/srv/DataPool/Daten \ -v /srv/DataPool/Backups:/data \ -p 4242:4242 -p 4243:4243 -p 4280:4280 gfjardim/crashplan@sha256:9d8eed240da821f1dca66622442838755811b688ae4d442b8078e1ea3d3d5f03 Regards, Hendrik The issue has been fixed in the last update. Quote Link to comment
Vynce Posted October 2, 2016 Share Posted October 2, 2016 Thanks, that fixed it for me. Quote Link to comment
landS Posted October 2, 2016 Share Posted October 2, 2016 gfjardim you are awesome! Quote Link to comment
zero_koop Posted October 2, 2016 Share Posted October 2, 2016 Hey, does anyone know how to use the clipboard copy/paste function? I need to paste in my very looooong encryption key and when I type it it says invalid so I must be messing it up. I can paste the text into the clipboard text box, but when I right-click within the crashplan app I cannot select paste. Quote Link to comment
Leifgg Posted October 2, 2016 Share Posted October 2, 2016 Hey, does anyone know how to use the clipboard copy/paste function? I need to paste in my very looooong encryption key and when I type it it says invalid so I must be messing it up. I can paste the text into the clipboard text box, but when I right-click within the crashplan app I cannot select paste. Save your key file in a txt file and import it from there. It need to be in a location that CrashPlan can see like /appdata/crashplan/...... Sent from my SGP771 using Tapatalk Quote Link to comment
zero_koop Posted October 2, 2016 Share Posted October 2, 2016 Thanks, I'll try that. Quote Link to comment
landS Posted October 3, 2016 Share Posted October 3, 2016 Is it OK to increase the RAM from the default 1024 MB to 2048? As per: Open the CrashPlan app Double-click the CrashPlan logo in the upper-right corner Enter the following command, using a value appropriate for the size of your backup selection (for example, 1536 for a 1.5 TB selection): java mx 1536, restart The CrashPlan app closes http://support.code42.com/CrashPlan/4/Troubleshooting/Adjusting_CrashPlan_Settings_For_Memory_Usage_With_Large_Backups Thanks! Quote Link to comment
gfjardim Posted October 3, 2016 Author Share Posted October 3, 2016 Is it OK to increase the RAM from the default 1024 MB to 2048? As per: Open the CrashPlan app Double-click the CrashPlan logo in the upper-right corner Enter the following command, using a value appropriate for the size of your backup selection (for example, 1536 for a 1.5 TB selection): java mx 1536, restart The CrashPlan app closes http://support.code42.com/CrashPlan/4/Troubleshooting/Adjusting_CrashPlan_Settings_For_Memory_Usage_With_Large_Backups Thanks! Yes, it is, but you have to restart it from the unRAID webui. Quote Link to comment
primeval_god Posted October 3, 2016 Share Posted October 3, 2016 After updating the Crashplan docker I can no longer connect to the web interface. The container logs now show the following messages being logged repeatedly every few seconds. Fatal server error: Could not create lock file in /tmp/.tX1-lock Openbox-Message: Failed to open the display from the DISPLAY environment variable. Any help would be appreciated. Quote Link to comment
gfjardim Posted October 4, 2016 Author Share Posted October 4, 2016 After updating the Crashplan docker I can no longer connect to the web interface. The container logs now show the following messages being logged repeatedly every few seconds. Fatal server error: Could not create lock file in /tmp/.tX1-lock Openbox-Message: Failed to open the display from the DISPLAY environment variable. Any help would be appreciated. Just borked it in the last update. Just baking a new one, please try to update in 10 minutes. Quote Link to comment
AcidRaZor Posted October 4, 2016 Share Posted October 4, 2016 I just lost a drive; For some reason it forgot a superblock or something and didn't want to mount. Stupid me formatted it in Unraid when it also detected it couldn't mount it (instead of removing it first). There goes 1 TB data. I'm now restoring from Crash Plan, but it just informed me that I don't have enough disk space? Does crashplan copy the restore from the web to it's own Docker container first and then push it to the array? How can I make the restore happen directly to the drives? Quote Link to comment
Leifgg Posted October 4, 2016 Share Posted October 4, 2016 You can restore to another share or folder. Go to Restore and select "a folder" then click "nobody" and browse for the location you prefer. Quote Link to comment
trurl Posted October 4, 2016 Share Posted October 4, 2016 I just lost a drive; For some reason it forgot a superblock or something and didn't want to mount. Stupid me formatted it in Unraid when it also detected it couldn't mount it (instead of removing it first). There goes 1 TB data. Please ask next time if you aren't sure what you should do. Format means "write an empty filesystem to this disk". That is what it has always meant in every operating system you have ever used. unRAID treats this write just like any other, by updating parity, so parity agrees you have an empty filesystem. Quote Link to comment
landS Posted October 4, 2016 Share Posted October 4, 2016 Warning to those using Multiple Backup Sources / Share. v6.2 of Unraid and Crashplan not so happy... In v6.1.9 I was able to select multiple Backup Sources, and I added 1/share. In v6.2 the docker refused to start. Blew away the container, added fresh, manually altered xml to include multiple backup sources as the GUI (+) option was no longer available... and the docker crashed and refused to start. Blew away the container, added fresh, and no problem with the initial crashplan setup with a single Backup source: /mnt/user This allows me in crashplan to select all the same info to backup... but it also kicked off a fresh backup. I only send about 650 GB to the cloud, RAW pictures taking up the bulk of this space, so not a huge deal... Thanks for keeping up with this Docker G! Quote Link to comment
Hoopster Posted October 4, 2016 Share Posted October 4, 2016 After the latest Crashplan update the Windows client will no longer connect to the backup engine even after doing the standard copy of ui.info from the client machine to the Crashplan server ID folder. GUI connects fine. It appears the .identity file was updated on both the Windows client and the server (they both have the same date/time stamp - 12:05 pm today) however, they are not identical. I have not paid enough attention in the past to know if this always happens and is not an issue or if it is a problem. For the last several Crashplan container updates all I have needed to do to get the Windows client to connect to the engine is to copy the ui.info file on the client over to the server. EDIT: the previous Crashplan update (prior to the one downloaded and installed today) worked fine for me with both the GUI and Windows client although, apparently, the GUI was not connecting for some users. Quote Link to comment
Helmonder Posted October 4, 2016 Share Posted October 4, 2016 Its also not working for me anymore... crashplan clients cannot connect anymore.. not only windows.. my main crashplan server can also not connect to the backupserver.. both running crashplan, on 6.2, same docker version.. Quote Link to comment
airbillion Posted October 5, 2016 Share Posted October 5, 2016 I hate to bring up another issue, but on my chromebook the I have no control with my mouse cursor... I can connect fine and see crashplan app, but the mouse pointer cannot click on anything...when it is on top of the app the pointer disappears...If I use regular chrome from my desktop it works fine, but not with the chrome browser on a chromebook...any ideas?? Thanks for your efforts gfjardim! Quote Link to comment
Helmonder Posted October 5, 2016 Share Posted October 5, 2016 I hate to bring up another issue, but on my chromebook the I have no control with my mouse cursor... I can connect fine and see crashplan app, but the mouse pointer cannot click on anything...when it is on top of the app the pointer disappears...If I use regular chrome from my desktop it works fine, but not with the chrome browser on a chromebook...any ideas?? Thanks for your efforts gfjardim! this is working fine for me.. Quote Link to comment
airbillion Posted October 5, 2016 Share Posted October 5, 2016 I hate to bring up another issue, but on my chromebook the I have no control with my mouse cursor... I can connect fine and see crashplan app, but the mouse pointer cannot click on anything...when it is on top of the app the pointer disappears...If I use regular chrome from my desktop it works fine, but not with the chrome browser on a chromebook...any ideas?? Thanks for your efforts gfjardim! Edit:. Figured out with the issue was! My Dell Chromebook has a touchscreen...vnc will take the inputs via touch and not my mouse pointer... So no real issue...my mistake. Quote Link to comment
tron Posted October 5, 2016 Share Posted October 5, 2016 Its also not working for me anymore... crashplan clients cannot connect anymore.. not only windows.. my main crashplan server can also not connect to the backupserver.. both running crashplan, on 6.2, same docker version.. Same here. Copied ui info key again, which had changed, but it still didn't work. Quote Link to comment
opentoe Posted October 6, 2016 Share Posted October 6, 2016 Crashplan just updated to 4.8.0. It crashed during the update I guess, so I was forced to reboot and that brought it back to life. It is now syncing. Running 6.2.1. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.