WexfordStyle Posted January 24, 2017 Share Posted January 24, 2017 https://github.com/tidusjar/Ombi This looks quite promising as an alternative to PlexRequests. Also, according to the devs of radarr it should be offering support in the near future. Hopefully, I can finally dump couchpotato. Quote Link to comment
squirrellydw Posted July 30, 2017 Share Posted July 30, 2017 Any chance making this into a docker https://www.reddit.com/r/LazyMan/wiki/linux Quote Link to comment
mjorud Posted August 10, 2017 Share Posted August 10, 2017 On 18.7.2016 at 0:15 PM, dartworth said: Just a few requests here. Mayan EDMS - https://gitlab.com/mayan-edms/mayan-edms-docker Free Open Source DMS (document management system). Paperless - https://github.com/danielquinn/paperless/ Scan, index, and archive all of your paper documents Read the Docs - https://github.com/rtfd/readthedocs.org Thanks A Paperless docker would be awesome. It's on Docker Hub, but I have not been able to make any sense of that. 1 Quote Link to comment
jmmille Posted August 21, 2017 Share Posted August 21, 2017 On 8/10/2017 at 10:03 AM, mjorud said: A Paperless docker would be awesome. It's on Docker Hub, but I have not been able to make any sense of that. Yea, I gave the Paperless docker on the hub a try and failed horribly. I hope someone way smarter than me will figure it out soon! 1 Quote Link to comment
killeriq Posted October 1, 2017 Share Posted October 1, 2017 On 11/13/2016 at 11:49 PM, kingfenix said: ok this one would be a new protcol/client type. It has a linux web client so would be perfect I think if someone could tackle this please!!! AirDC++ https://airdcpp-web.github.io/ any progress on this? thanks Quote Link to comment
Ray Posted January 24, 2018 Share Posted January 24, 2018 Logicaldoc docker would be amazing! There is already a docker container set up but I don't know how to install it outside of the way unRAID does it. https://hub.docker.com/r/logicaldoc/logicaldoc-ce-mysql/builds/ I'll pay someone to do this, just send me a message. Quote Link to comment
trurl Posted January 24, 2018 Share Posted January 24, 2018 1 minute ago, Ray said: Logicaldoc docker would be amazing! There is already a docker container set up but I don't know how to install it outside of the way unRAID does it. https://hub.docker.com/r/logicaldoc/logicaldoc-ce-mysql/builds/ I'll pay someone to do this, just send me a message. Community Applications will let you try to install a docker from docker hub in just the same way it lets you install dockers from this forum. See the CA thread for details Quote Link to comment
Ray Posted January 25, 2018 Share Posted January 25, 2018 On 8/24/2016 at 5:16 AM, Jammie said: I would like to second this request for Mayan EDMS. There's currently a Docker container on docker hub (source on GitLab) but it doesn't support upgrading. I'm currently looking into it myself, but I think someone with more docker experience would be able to do it easily. I know this is an old post but I was able to install the Mayan EDMS docker on unRAID. I passed shares to it so the files would be stored outside the docker. So far it seems to be working great. I would be happy to share a screenshot of the settings if anyone would like to see it. 1 Quote Link to comment
Naed Posted January 30, 2018 Share Posted January 30, 2018 On 1/25/2018 at 3:34 PM, Ray said: I know this is an old post but I was able to install the Mayan EDMS docker on unRAID. I passed shares to it so the files would be stored outside the docker. So far it seems to be working great. I would be happy to share a screenshot of the settings if anyone would like to see it. Hi Ray, I'm keen to see a screenshot of your settings as I've had no success getting Mayan installed. Cheers, Dean Quote Link to comment
Ray Posted January 30, 2018 Share Posted January 30, 2018 1 hour ago, Naed said: Hi Ray, I'm keen to see a screenshot of your settings as I've had no success getting Mayan installed. Cheers, Dean I would be happy to send the screenshot but I ended up moving to a VM and installed it with MySql. The built in database just couldn't keep up with the document load. Quote Link to comment
Naed Posted January 30, 2018 Share Posted January 30, 2018 2 minutes ago, Ray said: I would be happy to send the screenshot but I ended up moving to a VM and installed it with MySql. The built in database just couldn't keep up with the document load. Cool, thanks anyway. I might try the VM route instead as I'll likely hit the same issue. I have a feeling I'll need to add some RAM though as I only have 3GB. Off to the store I guess. Quote Link to comment
Sin Posted May 3, 2018 Share Posted May 3, 2018 Mega Client Docker pleae https://github.com/meganz/https://mega.nz/sync Quote Link to comment
jbear Posted May 11, 2018 Share Posted May 11, 2018 https://www.mymediaalexa.com/ They finally have a Linux version in BETA, would be great to have a Docker. This apps allows you to play your local media collection through the Alexa using voice commands. I have messed with it on Windows, and it's pretty cool, not sure how stable the Linux version is, but it's worthy of a Docker. Thank you for your consideration. Quote Link to comment
hernandito Posted May 11, 2018 Share Posted May 11, 2018 On 1/24/2018 at 1:21 AM, Ray said: way 3 hours ago, jbear said: https://www.mymediaalexa.com/ They finally have a Linux version in BETA, would be great to have a Docker. This apps allows you to play your local media collection through the Alexa using voice commands. I have messed with it on Windows, and it's pretty cool, not sure how stable the Linux version is, but it's worthy of a Docker. Thank you for your consideration. I could take a stab at this if you are able to find me the Linux install directions (not the raspberry pi directions). thanks Quote Link to comment
CHBMB Posted May 11, 2018 Share Posted May 11, 2018 6 minutes ago, hernandito said: I could take a stab at this if you are able to find me the Linux install directions (not the raspberry pi directions). thanks I'd be careful about this @hernandito it's not open source software. Interpret the EULA carefully before you publish anything. 2 PERMITTED LICENSE USE AND RESTRICTIONS Bizmodeller Limited hereby gives End User a non-exclusive license to use the Software. The Software is subject to an agreement between Bizmodeller and End User obligating that End User return or destroy all copies of the Software unless End User purchases a subscription for the My Media for Alexa service after the expiration of the Trial Period; such Trial Period not to exceed thirty (7) days. Ongoing use of the Software requires a subscription for the My Media for Alexa service after the Trial Period otherwise the Software will reduce in functionality or stop running. A subscription for the My Media for Alexa service can be purchased by following instructions prompted by the Software. You may: use the Software on multiple computers; copy the Software for archival purposes, provided any copy contains all of the original Software's proprietary notices. You may not: permit other individuals to use the Software except under the terms listed above; modify, translate, reverse engineer, decompile, disassemble (except to the extent applicable laws specifically prohibit such restriction), create derivative works based on the Software; copy the Software (except as specified above); rent, sell, lend, lease, redistribute, sublicense, transfer or otherwise transfer rights to the Software; remove any proprietary notices or labels on the Software. To the extent that the Software may be used to reproduce materials, such use is limited to reproduction of non-copyrighted materials, materials in which you own the copyright, or materials you are authorized or legally permitted to reproduce. Quote Link to comment
jbear Posted May 11, 2018 Share Posted May 11, 2018 (edited) 43 minutes ago, hernandito said: I could take a stab at this if you are able to find me the Linux install directions (not the raspberry pi directions). thanks @ CHBMB Contacted developer .. See below. On 11 May 2018, at 21:54, Jonas Bearbower wrote: Any plans to release a DOCKERIZED (www.docker.com) version of your program? Many of use are using UNRAID, QNAP or other DOCKER capable NAS devices, a dockerized version of your software is the ideal way to go. Your end user agreement does not appear to be open to someone dockerizing your existing Linux beta version, as it may not comply with the EULA. ------------------------------------------------------------ Yup we have one in beta, would you be interested in testing it? Many thanks Ed My Media for Alexa Edited May 11, 2018 by jbear Quote Link to comment
CHBMB Posted May 11, 2018 Share Posted May 11, 2018 There you go..... I have not got an Alexa or Google Home personally (and am very much against the idea of having one in my house.) But I think this was a sensible move to contact the dev and not just publish a container. Quote Link to comment
hernandito Posted May 13, 2018 Share Posted May 13, 2018 My Media Alexa (got it working in a Ubuntu Server VM) I was able to install and run it in an existing Ubuntu Server VM by: Putty into the command line of your VM and create a folder "/mnt/music" wget https://s3.amazonaws.com/bizmodeller/MyMediaForAlexa/Release+1.3.74.0/mymedia_1.3.74.0-1_amd64.deb sudo dpkg -i mymedia_1.3.74.0-1_amd64.deb Edit fstab file by: sudo nano /etc/fstab Insert the line: //192.168.0.201/Media/Music /mnt/music cifs rw,guest,uid=root,iocharset=utf8,file_mode=0777,dir_mode=0777,noperm 0 0 Change the first part to your unRAID's IP address and the share where your music resides. I don't have any security on the unRAID. If you have security, you will need to change the other parts of my line above. Save the file and then mount the share by: sudo mount -a Now you can access the web interface via: http://xxx.xxx.xxx.xxx:52051, where x's are your VM's ip address. Then follow the directions and add your media folder /mnt/music. I have tested it and it works perfectly for me. I am a bit rusty in my Docker skills. For me, the tricky part is to make a docker that will get any software updates and survive re-installs. The folder that contains the user configured files is: /opt/mymedia/.MyMediaForAlexa/ I will attempt to bone up my Docker skills over the next week or so... but if you are a good Docker template guy, please go for it. The above will help. Quote Link to comment
jbear Posted May 15, 2018 Share Posted May 15, 2018 @CHBMB, @hernandito Now that I have the Docker from the Vendor, how do I install? Download links below. https://s3.amazonaws.com/bizmodeller/MyMediaForAlexa/Release+1.3.75.0/mymedia_docker-1.3.75.0-1_amd64.tar https://s3.amazonaws.com/bizmodeller/MyMediaForAlexa/Release+1.3.75.0/mymedia_docker-1.3.75.0-1_armhf.tar Quote Link to comment
CHBMB Posted May 15, 2018 Share Posted May 15, 2018 No idea how to run that tar file. They can either direct you to a docker hub build or provide you with a dockerfile you build locally. Quote Link to comment
ken-ji Posted May 16, 2018 Share Posted May 16, 2018 Download the tarball Then # docker import mymedia_docker-1.3.75.0-1_amd64.tar mymedia:1.3.75.0 # docker tag mymedia:1.3.75.0 mymedia:latest This now gives you a local docker images named mymedia:latest (with a version'd tag to roll back incase the next one doesn't quite work out) From here you can do manual docker run commands or build a template. Quote Link to comment
hernandito Posted May 16, 2018 Share Posted May 16, 2018 1 hour ago, ken-ji said: Download the tarball Then # docker import mymedia_docker-1.3.75.0-1_amd64.tar mymedia:1.3.75.0 # docker tag mymedia:1.3.75.0 mymedia:latest This now gives you a local docker images named mymedia:latest (with a version'd tag to roll back incase the next one doesn't quite work out) From here you can do manual docker run commands or build a template. I am completely lost on how to end up with a Docker file like the ones created in github and build on the docker-hub web site. Quote Link to comment
ken-ji Posted May 16, 2018 Share Posted May 16, 2018 This is the "binary" way of publishing docker images without providing a Dockerfile(source) or the registry (hub.docker.com) - the tar is actually just the entire filesystem and some control metadata files for entrypoint, exposed ports, volumes, etc. Its almost similar to a repo in hub.docker.com where you manually do docker push mydocker/docker:latest So if the devs gave you this tarball, that usually means the stuff they put in is not yet published (will not be published) for public use/reuse. Its like you created an emby/embyserver container (let's call it Emby) with docker run then you stop the container, and then export a tarball with docker export Emby -o Emby.tar Quote Link to comment
hernandito Posted May 16, 2018 Share Posted May 16, 2018 (edited) Thank you Ken-ji. Now I understand the concept of the file being a complete system and that they don't want you to mess with it. What I cannot figure is how to create a template, and where does the template point to for this tar file. I will leave this to savvier others to create the unRAID template. Thanks again, H. Edited May 16, 2018 by hernandito Quote Link to comment
CHBMB Posted May 16, 2018 Share Posted May 16, 2018 Download the tarball Then# docker import mymedia_docker-1.3.75.0-1_amd64.tar mymedia:1.3.75.0# docker tag mymedia:1.3.75.0 mymedia:latest This now gives you a local docker images named mymedia:latest (with a version'd tag to roll back incase the next one doesn't quite work out) From here you can do manual docker run commands or build a template.We'll learn something new every day.Never seen a container distributed in it's component layers before. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.