jbear Posted May 16, 2018 Share Posted May 16, 2018 So now we just need a template to make it work with UNRAID? Quote Link to comment
CHBMB Posted May 16, 2018 Share Posted May 16, 2018 So now we just need a template to make it work with UNRAID?No, because there's no way to pull that data. Quote Link to comment
jbear Posted May 16, 2018 Share Posted May 16, 2018 2 hours ago, CHBMB said: 3 hours ago, jbear said: So now we just need a template to make it work with UNRAID? No, because there's no way to pull that data. Could we leverage this? Quote Link to comment
CHBMB Posted May 16, 2018 Share Posted May 16, 2018 5 minutes ago, jbear said: Could we leverage this? Only if you're prepared to host the private docker registry and the company who sent you those files don't mind you redistributing them. Quote Link to comment
ken-ji Posted May 16, 2018 Share Posted May 16, 2018 24 minutes ago, CHBMB said: Only if you're prepared to host the private docker registry and the company who sent you those files don't mind you redistributing them. Well, not really, as you can push the docker image to the public repo. (hub.docker.com) and you can create a template file, stick it in the USB and have it refer to the local docker image (at least I don't think there are checks in the WebUI) but even then, you can run the docker image from the CLI and then you'd be golden... but yeah, its all up to yourself if you want it need it. Quote Link to comment
CHBMB Posted May 16, 2018 Share Posted May 16, 2018 10 minutes ago, ken-ji said: Well, not really, as you can push the docker image to the public repo. (hub.docker.com) and you can create a template file, stick it in the USB and have it refer to the local docker image (at least I don't think there are checks in the WebUI) but even then, you can run the docker image from the CLI and then you'd be golden... but yeah, its all up to yourself if you want it need it. Thought that image was for hosting your own private repo? Didn't realise it syndicated with the hub. Agreed a template file would work like that, removing the need for CLI. Point remains though that this software isn't owned by @jbear and pushing it into the public domain isn't the solution here. Quote Link to comment
ken-ji Posted May 16, 2018 Share Posted May 16, 2018 32 minutes ago, CHBMB said: Thought that image was for hosting your own private repo? Didn't realise it syndicated with the hub. Agreed a template file would work like that, removing the need for CLI. Point remains though that this software isn't owned by @jbear and pushing it into the public domain isn't the solution here. The docker registry image is for running your own registry. What I meant is that the tar image, once installed to your local docker system, can be pushed to a public (or private) repo. But yeah - we should get the devs OK before we attempt such a thing. was @jbear actually allowed to share the download links? But for those who really want it, they can work out the docker run command and share that. Quote Link to comment
jbear Posted May 16, 2018 Share Posted May 16, 2018 1 minute ago, ken-ji said: The docker registry image is for running your own registry. What I meant is that the tar image, once installed to your local docker system, can be pushed to a public (or private) repo. But yeah - we should get the devs OK before we attempt such a thing. was @jbear actually allowed to share the download links? But for those who really want it, they can work out the docker run command and share that. I was asked if I wanted to try the beta docker, I was NOT told that I could NOT share anything, or did I sign anything. It was a fairly casual exchange. They said they hadn't had time to put together any documentation for the docker beta. I was able to import the docker image based on the CLI commands you shared, but I have no idea how to proceed from here. I unfortunately have been spoiled by the simplicity of UNRAID, and don't have a strong working knowledge of docker based apps. I asked the vendor if they planned on making it available via DockerHub, I will followup when I get an answer. Quote Link to comment
fireb1adex Posted May 17, 2018 Share Posted May 17, 2018 Does anyone know how easy it is to convert a docker image for use with UNRAID? I found this which should be ideal, but so far no converted version? https://github.com/bitnami/bitnami-docker-suitecrm It's for SUITECRM which I'm currently working on an integration for... Quote Link to comment
bland328 Posted May 22, 2018 Share Posted May 22, 2018 (edited) I humbly suggest/request an unRAID-friendly Docker based on the Raspberry Pi Server (piserver) at: https://github.com/raspberrypi/piserver piserver is an official project of the Raspberrry Pi Foundation (https://www.raspberrypi.org/blog/piserver/), which can run on a Raspberry Pi, but is primarily intended to run on a Debian-based OS on an x86 computer. Its purpose is pretty slick: To provide easy-to-manage network-based bootability to Raspberry Pis without SD cards (or with minimal, read-only, corruption-proof SD cards for older models). I took a shot at building a VNC-friendly Docker based on the brilliant https://hub.docker.com/r/jlesage/baseimage-gui/ base images created by @DJoss, but my Docker-fu is still too weak to overcome a couple D-Bus struggles...and maybe I didn't really need to be using the bigger Debian baseimage-gui in the first place! I painlessly built it and got it running on a local Debian 8 VM, but just can't...quite...make it a good Docker. Many thanks to anyone who might make this magic happen. Edited May 27, 2018 by bland328 Typo Quote Link to comment
remati Posted June 6, 2018 Share Posted June 6, 2018 I suggest/request a unraid safe docker based on MegaSync https://github.com/TuRDMaN/megasync 1 Quote Link to comment
nextgenpotato Posted July 17, 2018 Share Posted July 17, 2018 On 8/10/2017 at 9:03 AM, mjorud said: A Paperless docker would be awesome. It's on Docker Hub, but I have not been able to make any sense of that. +1 for paperless 1 Quote Link to comment
Hoodei Posted August 25, 2018 Share Posted August 25, 2018 Can anyone make a UNRAID template out of this https://github.com/lansuite/lansuite/ Quote Link to comment
hawihoney Posted October 6, 2018 Share Posted October 6, 2018 On 8/30/2016 at 6:13 AM, boxtor said: http://sqlitebrowser.org/ I use the Windows version for updating the Plex database as needed. It would be nice to have a Docker version on the server. +1 Quote Link to comment
Brettv Posted October 7, 2018 Share Posted October 7, 2018 Hi everyone, I would like to request a docker container for Roon. I am currently using the public on by steefdebruijn but it would be nice to have a linuxserver.io version. More info on roon here - https://roonlabs.com/ Kind regards Brett 1 Quote Link to comment
CHBMB Posted October 7, 2018 Share Posted October 7, 2018 9 hours ago, Brettv said: Hi everyone, I would like to request a docker container for Roon. I am currently using the public on by steefdebruijn but it would be nice to have a linuxserver.io version. More info on roon here - https://roonlabs.com/ Kind regards Brett Can't find a license for that, but it doesn't look very open source. Can't say we'd be interested in it. 1 Quote Link to comment
Brettv Posted October 8, 2018 Share Posted October 8, 2018 Yep fair call. Here is the relevant thread in the roon forums. Thanks for considering regardless https://community.roonlabs.com/t/docker-images-for-roon/13040/32 Quote Link to comment
Xaero Posted October 19, 2018 Share Posted October 19, 2018 Anybody tried or gotten Pterodactyl.io dockers to work on unraid? I'd like to get that working as it seems like a better solution to me since I wish to run several game servers. I'm currently using MineOS for my minecraft server, and my other game servers are on my old NAS running ArchLinux. Everything is very manual and has no GUI there, which makes it difficult for me to allow other administrators access to start/stop functions etc. Pterodactyl seems like it would enable me to allow other people access to the bare essentials pretty easily. I'm trying to retire the old NAS, so I can eventually repopulate it with larger disks and renew it. Quote Link to comment
BBoYTuRBo Posted November 2, 2018 Share Posted November 2, 2018 (edited) I'd like to request an UNRAID docker template for IVRE. It's basically a one-click install if you're using Vagrant, and they have all the instructions for installing/running it with only Docker, but I can't seem to get it to work properly on UNRAID.https://github.com/cea-sec/ivre/blob/master/doc/DOCKER.md Edited November 2, 2018 by BBoYTuRBo Quote Link to comment
Techn0mancer Posted November 6, 2018 Share Posted November 6, 2018 I'd really like to see a docker for Hubzilla "Hubzilla is a powerful platform for creating interconnected websites featuring a decentralized identity, communications, and permissions framework built using common webserver technology." https://project.hubzilla.org/page/hubzilla/hubzilla-project Quote Link to comment
Ray Posted November 7, 2018 Share Posted November 7, 2018 Can someone help with a docker install script for Mayan-EDMS? This is such a fantastic document management system that would be so helpful for many. It seems like most of the work is done and just needs a template so we can set document volumes, etc. It's above my abilities but maybe someone here can do it? #!/bin/sh set -e # This script is meant for quick & easy install via: # $ curl -fsSL get.mayan-edms.com -o get-mayan-edms.sh # $ sh get-mayan-edms.sh # # NOTE: Make sure to verify the contents of the script # you downloaded matches the contents of docker.sh # located at https://gitlab.com/mayan-edms/mayan-edms/blob/master/contrib/scripts/install/docker.sh # before executing. : ${VERBOSE:=true} : ${INSTALL_DOCKER:=false} : ${DELETE_VOLUMES:=false} : ${DATABASE_USER:=mayan} : ${DATABASE_NAME:=mayan} : ${DATABASE_PASSWORD:=mayanuserpass} : ${DOCKER_POSTGRES_IMAGE:=postgres:9.5} : ${DOCKER_POSTGRES_CONTAINER:=mayan-edms-postgres} : ${DOCKER_POSTGRES_VOLUME:=/docker-volumes/mayan-edms/postgres} : ${DOCKER_POSTGRES_PORT:=5432} : ${DOCKER_MAYAN_IMAGE:=mayanedms/mayanedms:latest} : ${DOCKER_MAYAN_CONTAINER:=mayan-edms} : ${DOCKER_MAYAN_VOLUME:=/docker-volumes/mayan-edms/media} cat << EOF ███╗ ███╗ █████╗ ██╗ ██╗ █████╗ ███╗ ██╗ ████╗ ████║██╔══██╗╚██╗ ██╔╝██╔══██╗████╗ ██║ ██╔████╔██║███████║ ╚████╔╝ ███████║██╔██╗ ██║ ██║╚██╔╝██║██╔══██║ ╚██╔╝ ██╔══██║██║╚██╗██║ ██║ ╚═╝ ██║██║ ██║ ██║ ██║ ██║██║ ╚████║ ╚═╝ ╚═╝╚═╝ ╚═╝ ╚═╝ ╚═╝ ╚═╝╚═╝ ╚═══╝ Docker deploy script NOTE: Make sure to verify the contents of this script matches the contents of docker.sh located at https://gitlab.com/mayan-edms/mayan-edms/blob/master/contrib/scripts/install/docker.sh before executing. EOF if [ "$VERBOSE" = true ]; then echo "Variable values to be used:" echo "---------------------------" echo "INSTALL_DOCKER: $INSTALL_DOCKER" echo "DELETE_VOLUMES: $DELETE_VOLUMES" echo "DATABASE_USER: $DATABASE_USER" echo "DATABASE_NAME: $DATABASE_NAME" echo "DATABASE_PASSWORD: $DATABASE_PASSWORD" echo "DOCKER_POSTGRES_IMAGE: $DOCKER_POSTGRES_IMAGE" echo "DOCKER_POSTGRES_CONTAINER: $DOCKER_POSTGRES_CONTAINER" echo "DOCKER_POSTGRES_VOLUME: $DOCKER_POSTGRES_VOLUME" echo "DOCKER_POSTGRES_PORT: $DOCKER_POSTGRES_PORT" echo "DOCKER_MAYAN_IMAGE: $DOCKER_MAYAN_IMAGE" echo "DOCKER_MAYAN_CONTAINER: $DOCKER_MAYAN_CONTAINER" echo "DOCKER_MAYAN_VOLUME: $DOCKER_MAYAN_VOLUME" echo "\nStarting in 10 seconds." sleep 10 fi if [ "$INSTALL_DOCKER" = true ]; then echo -n "* Installing Docker..." curl -fsSL get.docker.com -o get-docker.sh >/dev/null sh get-docker.sh >/dev/null 2>&1 rm get-docker.sh echo "Done" fi if [ -z `which docker` ]; then echo "Docker is not installed. Rerun this script with the variable INSTALL_DOCKER set to true." exit 1 fi echo -n "* Removing existing Mayan EDMS and PostgreSQL containers (no data will be lost)..." true || docker stop $DOCKER_MAYAN_CONTAINER >/dev/null 2>&1 true || docker rm $DOCKER_MAYAN_CONTAINER >/dev/null 2>&1 true || docker stop $DOCKER_POSTGRES_CONTAINER >/dev/null 2>&1 true || docker rm $DOCKER_POSTGRES_CONTAINER >/dev/null 2>&1 echo "Done" if [ "$DELETE_VOLUMES" = true ]; then echo -n "* Deleting Docker volumes in 5 seconds (warning: this delete all document data)..." sleep 5 true || rm DOCKER_MAYAN_VOLUME -Rf true || rm DOCKER_POSTGRES_VOLUME -Rf echo "Done" fi echo -n "* Pulling (downloading) the Mayan EDMS Docker image..." docker pull $DOCKER_MAYAN_IMAGE >/dev/null echo "Done" echo -n "* Pulling (downloading) the PostgreSQL Docker image..." docker pull $DOCKER_POSTGRES_IMAGE > /dev/null echo "Done" echo -n "* Deploying the PostgreSQL container..." docker run -d \ --name $DOCKER_POSTGRES_CONTAINER \ --restart=always \ -p $DOCKER_POSTGRES_PORT:5432 \ -e POSTGRES_USER=$DATABASE_USER \ -e POSTGRES_DB=$DATABASE_NAME \ -e POSTGRES_PASSWORD=$DATABASE_PASSWORD \ -v $DOCKER_POSTGRES_VOLUME:/var/lib/postgresql/data \ $DOCKER_POSTGRES_IMAGE >/dev/null echo "Done" echo -n "* Waiting for the PostgreSQL container to be ready (10 seconds)..." sleep 10 echo "Done" echo -n "* Deploying Mayan EDMS container..." docker run -d \ --name $DOCKER_MAYAN_CONTAINER \ --restart=always \ -p 80:8000 \ -e MAYAN_DATABASE_ENGINE=django.db.backends.postgresql \ -e MAYAN_DATABASE_HOST=172.17.0.1 \ -e MAYAN_DATABASE_NAME=$DATABASE_NAME \ -e MAYAN_DATABASE_PASSWORD=$DATABASE_PASSWORD \ -e MAYAN_DATABASE_USER=$DATABASE_USER \ -e MAYAN_DATABASE_PORT=$DOCKER_POSTGRES_PORT \ -e MAYAN_DATABASE_CONN_MAX_AGE=60 \ -v $DOCKER_MAYAN_VOLUME:/var/lib/mayan \ $DOCKER_MAYAN_IMAGE >/dev/null echo "Done" echo -n "* Waiting for the Mayan EDMS container to be ready (might take a few minutes)..." while ! curl --output /dev/null --silent --head --fail http://localhost:80; do sleep 1 && echo -n .; done; echo "Done" 1 Quote Link to comment
Squid Posted November 7, 2018 Share Posted November 7, 2018 OTOH with zero testing, etc basically following the dockerHub directions for it. See here https://hub.docker.com/r/mayanedms/mayanedms/ Install PostGres (available in Apps) Add the following environment variables POSTGRES_USER=mayan POSTGRES_DB=mayan POSTGRES_PASSWORD=mayanuserpass Enable dockerHub searching in CA's settings and search for mayanedms Add the following environment variables MAYAN_DATABASE_ENGINE=django.db.backends.postgresql MAYAN_DATABASE_HOST=unRaid's IP address MAYAN_DATABASE_PORT=the port for postgres MAYAN_DATABASE_NAME=mayan MAYAN_DATABASE_PASSWORD=mayanuserpass MAYAN_DATABASE_USER=mayan MAYAN_DATABASE_CONN_MAX_AGE=60 1 Quote Link to comment
denellum Posted December 27, 2018 Share Posted December 27, 2018 (edited) Alright got Mayan-EDMS working, DEV complete : root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='Mayan-EDMS' --net='bridge' -e TZ="America/Chicago" -e HOST_OS="Unraid" -e 'MAYAN_DATABASE_ENGINE'='django.db.backends.postgresql' -e 'MAYAN_DATABASE_HOST'='192.168.128.90' -e '5432'='5432' -e 'MAYAN_DATABASE_NAME'='mayan' -e 'MAYAN_DATABASE_PASSWORD'='PASSWORD' -e 'MAYAN_DATABASE_USER'='mayan' -e 'MAYAN_DATABASE_CONN_MAX_AGE'='60' -p '8000:8000/tcp' -v '/mnt/disks/Samsung_SSD_860_EVO_500GB_S3Z1NB0KB48195D/Mayan-EDMS/':'/var/lib/mayan/ Edited December 27, 2018 by denellum figured it out, sharing is caring 1 1 Quote Link to comment
Conson Droppa Posted March 12, 2019 Share Posted March 12, 2019 On 8/20/2017 at 7:15 PM, jmmille said: Yea, I gave the Paperless docker on the hub a try and failed horribly. I hope someone way smarter than me will figure it out soon! +1 for Paperless Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.